7D YAGEO

Document overview

  • PDF pages: 14

Technical content

Page 1

PDF page 1 diagram

DATA SHEET

POWER SUPPLY 07D series

RoHS compliant & Halogen free

Page 2

PDF page 2 diagram

Metal Oxide Varistors (MOV) Data Sheet

Features

PDF page 2 diagram

■ Wide operating voltage (V1mA) range from 18V to 820V ■ Fast responding to transient over-voltage ■ Large absorbing transient energy capability ■ Low clamping ratio and no follow-on current ■ Meets MSL level 1, per J-STD-020 ■ Operating Temperature:-40℃ ~ +105℃ ■ Storage Temperature:-40℃ ~ +125℃ ■ Safety certification:UL、CSA、VDE

Applications

■ Transistor, diode, IC, thyristor or triac semiconductor protection ■ Surge protection in consumer electronics ■ Surge protection in industrial electronics ■ Surge protection in electronic home appliances, gas and petroleum appliances ■ Relay and electromagnetic valve surge absorption

Part Number Code

4 7 1

K D 0 7

J

O

PDF page 2 diagram

Tolerance

Type

Surge Series

D: Disk

No suffix: Standard type

Varistor Voltage

J: High Surge type

180: 18V 101: 100V

Element Diameter 07

TR

Packing No suffix: Bulk TB: Tape & Box & P0=12.7mm TR: Tape & Reel & P0=12.7mm

Lead Shape No suffix: Straight leads O: Outside crimped leads F: Y Kinked leads

Page 3

PDF page 3 diagram

Dimensions

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

T

T

PDF page 3 diagram

O Type

Table 2 Unit: mm
Model T e Model T e
180K 1.5~4.5 1.3 241K 2.1~4.6 2.0
220K 1.6~4.6 1.4 271K 2.1~4.9 2.2
270K 1.6~4.7 1.6 301K 2.2~5.0 2.3
330K 1.7~4.9 1.5 331K 2.2~5.1 2.3
390K 1.6~4.8 1.6 361K 2.4~5.2 2.5
470K 1.7~4.9 1.7 391K 2.5~5.4 2.6
560K 1.8~5.0 1.9 431K 2.7~5.7 2.8
680K 1.9~5.2 2.2 471K 2.8~6.0 3.0
820K 1.6~4.1 1.6 511K 2.9~6.2 3.2
101K 1.9~4.3 1.8 561K 3.1~6.5 3.4
121K 1.9~4.5 2.0 621K 3.3~7.1 3.7
151K 1.7~4.8 1.6 681K 3.5~7.3 4.0
181K 1.8~4.3 1.7 751K 3.8~7.0 4.1
201K 1.9~4.4 1.8 781K 3.9~7.2 4.2
221K 2.0~4.5 1.9 821K 4.1~7.5 4.4
Table 1 Unit: mm
Symbol Dimension
H 7.5~12.0
H1 9.0~13.5
L(min.) 20.0
L1(min.) 15.0
D 7.0~9.0
F(±0.8) 5.0
T Table 2
e(±0.8) Table 2
d(±0.05) 0.6
d1(±0.4) 1.2

Page 4

PDF page 4 diagram

Electrical Characteristics

Part Number Maximum Allowable Voltage Varistor Voltage Maximum Clamping Voltage Withstanding Surge Current Maximum Energy (10/1000μs) Rated Power Typical Capacitance (Reference)
Standard High Surge V (V) AC V (V) DC V (V) 1mA I (A) P V (V) C I (A) Standard I (A) High Surge (J) Standard (J) High Surge (W) @1KHz (pf)
180KD07 180KD07J 11 14 18(15~21.6) 2.5 36 250 500 0.9 2.0 0.02 2800
220KD07 220KD07J 14 18 22(19.5~26) 2.5 43 250 500 1.1 2.4 0.02 2300
270KD07 270KD07J 17 22 27(24~31) 2.5 53 250 500 1.4 3.0 0.02 1800
330KD07 330KD07J 20 26 33(29.5~36.5) 2.5 65 250 500 1.7 3.5 0.02 1500
390KD07 390KD07J 25 31 39(35~43) 2.5 77 250 500 2.1 4.0 0.02 1300
470KD07 470KD07J 30 38 47(42~52) 2.5 93 250 500 2.5 5.0 0.02 1100
560KD07 560KD07J 35 45 56(50~62) 2.5 110 250 500 3.1 6.0 0.02 890
680KD07 680KD07J 40 56 68(61~75) 2.5 135 250 500 3.6 7.0 0.02 740
820KD07 820KD07J 50 65 82(74~90) 10 135 1200 1750 5 10.0 0.25 600
101KD07 101KD07J 60 85 100(90~110) 10 165 1200 1750 6.5 12.0 0.25 500
121KD07 121KD07J 75 100 120(108~132) 10 200 1200 1750 7.8 13.0 0.25 420
151KD07 151KD07J 95 125 150(135~165) 10 250 1200 1750 9.7 15.0 0.25 330
181KD07 181KD07J 115 150 180(162~198) 10 300 1200 1750 11.7 16.0 0.25 280
201KD07 201KD07J 130 170 200(180~220) 10 340 1200 1750 13.0 17.0 0.25 250
221KD07 221KD07J 140 180 220(198~242) 10 360 1200 1750 14.0 19.0 0.25 230
241KD07 241KD07J 150 200 240(216~264) 10 395 1200 1750 15.0 21.0 0.25 210
271KD07 271KD07J 175 225 270(243~297) 10 455 1200 1750 18.0 24.0 0.25 185
301KD07 301KD07J 190 250 300(270~330) 10 500 1200 1750 20.0 26.0 0.25 165
331KD07 331KD07J 210 275 330(297~363) 10 550 1200 1750 23.0 28.0 0.25 150
361KD07 361KD07J 230 300 360(324~396) 10 595 1200 1750 24.0 32.0 0.25 140
391KD07 391KD07J 250 320 390(351~429) 10 650 1200 1750 26.0 35.0 0.25 130
431KD07 431KD07J 275 350 430(387~473) 10 710 1200 1750 28.0 40.0 0.25 115
471KD07 471KD07J 300 385 470(423~517) 10 775 1200 1750 29.0 42.0 0.25 105
511KD07 511KD07J 320 415 510(459~561) 10 845 1200 1750 31.0 45.0 0.25 100
561KD07 561KD07J 350 460 560(504~616) 10 925 1200 1750 35.0 49.0 0.25 90
621KD07 621KD07J 385 505 620(558~682) 10 1025 1200 1750 38.0 55.0 0.25 80
681KD07 681KD07J 420 560 680(612~748) 10 1120 1200 1750 42.0 60.0 0.25 75
751KD07 751KD07J 460 615 750(675~825) 10 1240 1200 1750 45.0 64.0 0.25 70
781KD07 781KD07J 485 640 780(702~858) 10 1290 1200 1750 48.0 69.0 0.25 65
821KD07 821KD07J 510 670 820(738~902) 10 1355 1200 1750 52.0 73.0 0.25 60

Notes: 1. The tolerance of varistor voltage between 18V and 27V is more than 10%. 2. Leakage Current (@83% of V1mA):IR≤50μA (180K~680K) IR≤25μA (820K~821K)

Page 5

PDF page 5 diagram

Maximum Surge Current Derating Curve

180KD07 to 680KD07 10000 1000 (A) 1 Current 2 100 10 102 103 Surge 104 105 10 106 Max. 1 0.1 10 100 1000 10000 Td (μs) 820KD07 to 821KD07 10000 1 1000 2 10 (A) 102 Current 100 103 104 105 106 Surge 10 Max. 1 0.1 10 100 1000 10000 Td (μs)
180KD07J to 680KD07J 10000 1000 1 (A) 2 Current 100 10 102 103 Surge 104 10 105 106 Max. 1 0.1 10 100 1000 10000 Td (μs) 820KD07J to 821KD07J 10000 1 2 1000 10 102 (A) 103 Current 100 104 105 106 Surge 10 Max. 1 0.1 10 100 1000 10000 Td (μs)

Page 6

PDF page 6 diagram

Maximum Leakage Current and Maximum Clamping Voltage Curve

180KD07 to 680KD07 10000 1000 (A) 1 Current 2 100 10 102 103 Surge 104 105 10 106 Max. 1 0.1 10 100 1000 10000 Td (μs) 820KD07 to 821KD07 10000 1 1000 2 10 (A) 102 Current 100 103 104 105 106 Surge 10 Max. 1 0.1 10 100 1000 10000 Td (μs)
180KD07J to 680KD07J 10000 1000 1 (A) 2 Current 100 10 102 103 Surge 104 10 105 106 Max. 1 0.1 10 100 1000 10000 Td (μs) 820KD07J to 821KD07J 10000 1 2 1000 10 102 (A) 103 Current 100 104 105 106 Surge 10 Max. 1 0.1 10 100 1000 10000 Td (μs)

Page 7

PDF page 7 diagram

Maximum Leakage Current and Maximum Clamping Voltage Curve

PDF page 7 diagram

Page 8

PDF page 8 diagram

Maximum Leakage Current and Maximum Clamping Voltage Curve

PDF page 8 diagram

Page 9

PDF page 9 diagram

Reliability

Items Standard Test conditions / Methods Specifications
Tensile Strength of Terminals IEC60068-2-21 Gradually applying the force specified and keeping the unit fixed for 10±1 sec. Terminal diameter (mm) Force (kg) 0.5<d≤0.8 1.0 0.8<d≤1.25 2.0 1.25<d 4.0 No visible damage |ΔV 1mA/V1mA |≤5%
Bending Strength of Terminals IEC60068-2-21 Hold specimen and apply the force specified below to each lead. Bend the specimen to 90°, then return to the original position. Repeat the procedure in the opposite direction. Terminal diameter (mm) Force (kg) 0.5<d≤0.8 0.5 0.8<d≤1.25 1.0 1.25<d 2.0 No visible damage |ΔV 1mA/V1mA |≤5%
Vibration IEC60068-2-6 Frequency range: 10~55 Hz Amplitude: 0.75mm or 98m/s2 Direction: 3 mutually perpendicular directions, 2hrs each. No visible damage |ΔV 1mA/V1mA |≤5%
Solderability IEC60068-2-20 Solder Temp: 245±5℃ Dipping Time: 2±0.5 sec At least 95% of terminal electrode is covered by new solder
Resistance to Soldering Heat IEC60068-2-20 Solder Temp: 260±5℃ Dipping Time: 10±1 sec No visible damage |ΔV 1mA/V1mA |≤5%
High Temperature Storage IEC60068-2-2 Ambient Temp: 125±2℃ Duration: 1000±24hrs No visible damage |ΔV 1mA/V1mA |≤5%
Low Temperature Storage IEC60068-2-1 Ambient Temp: -40±2℃ Duration: 1000±24hrs No visible damage |ΔV 1mA/V1mA |≤5%
Damp Heat, Steady State IEC60068-2-78 The test is divided into two groups . a. 40±2℃ , 90~95% RH for 1344±24hrs b. 40±2℃ , 90~95% RH,at 10%VDC ,1344±24 hrs No visible damage |ΔV 1mA/V1mA|≤10% Insulation Resistance≧100MΩ
High Temperature Load MIL-STD-202 Method 108 Ambient Temp: 105±2℃ Duration: 1000±24hrs Load: Max. Allowable Voltage In AC. |ΔV 1mA/V1mA|≤10%
Temperature Cycle IEC60068-2-14 The conditions shown below shall be repeated 5 cycles Step Temperature (℃) Period (minutes) 1 -40±3 30±3 2 Room temperature 5±3 3 125±3 30±3 4 Room temperature 5±3 No visible damage |ΔV 1mA/V1mA |≤5%
8/20uS Surge Life IEC61051-1 8/20µS waveform,10 surge currents, unipolar, interval 30secs,amplitude corresponding to max. surge current derating curves for 20µS. No visible damage △Vb(1mA)≦±10%
10/1000µS Surge Life IEC61051-1 10/1000µS waveform,10 surge currents, unipolar, interval 2mins,amplitude corresponding to max. surge current derating curves for 1000µS. No visible damage |ΔV 1mA/V1mA |≤10%
Voltage Proof IEC61051-1 Metal balls method, 2500Vac 1 min. No visible damage
Step Temperature (℃) Period (minutes)
1 -40±3 30±3
2 Room temperature 5±3
3 125±3 30±3
4 Room temperature 5±3

Page 10

PDF page 10 diagram

Soldering Recommendation

PDF page 10 diagram
PDF page 10 diagram
PDF page 10 diagram
Item Conditions
Peak Temperature 265℃
Dipping Time 10 seconds (max.)
Soldering 1 time

Recommendation Reworking Conditions with Soldering Iron

PDF page 10 diagram
PDF page 10 diagram
Item Conditions
Temperature of Soldering Iron-tip 360℃ (max.)
Soldering Time 3 seconds (max.)
Distance from Varistor 2mm (min.)

Marking Code

PDF page 10 diagram

Page 11

PDF page 11 diagram

Taping Dimensions

P2 P h B W2 H0 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 12.7±1.0
P0 12.7±0.3
P1 3.85±0.7
P2 6.35±1.3
F 5.0±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H0 16.0±1.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 32max
P2 P h B W2 H0 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 12.7±1.0
P0 12.7±0.3
P1 3.85±0.7
P2 6.35±1.3
F 5.0±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H0 16.0±1.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 32max

Page 12

PDF page 12 diagram

Taping Dimensions

P2 P h B W2 H2 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 12.7±1.0
P0 12.7±0.3
P1 3.85±0.7
P2 6.35±1.3
F 5.0±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H2 20.0±2.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 32max

Quantity

Packaging Dimensions (Unit: mm) Quantity
In bulk for Terminals Untrimmed Products Max. 130 Max. 165 250 Max. 1000pcs/bag 4bags/box (180K~821K)
In bulk for Terminals Trimmed Products ax. M 66 Max. 165 252 Max. 1000pcs/bag 4bags/box (180K~821K)

Page 13

PDF page 13 diagram

Quantity

Packaging Dimensions (Unit: mm) Quantity
Tape & Box & P0=12.7mm ax. M 60 Max. 250 340 Max. 1500pcs/box (180K~391K)
1000pcs/box (431K~681K)
750pcs/box (751K~821K)
Tape & Reel & P0=12.7mm ax. M 60 Max. 365 365 Max. 55 Max. 30±1 Φ365 Max. 2000pcs/reel (180K~331K)
1500pcs/reel (361K~821K)

Page 14

PDF page 14 diagram

Legal Disclaimer

YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notice.

YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability.

YAGEO products are designed for general purpose applications under normal operation and usage conditions. Please contact YAGEO for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace equipment (artificial satellite, rocket, etc.), Atomic energy-related equipment, Aviation equipment, Disaster prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly public information network equipment, data-processing equipment , Medical devices, Military equipment, Power generation control equipment, Safety

equipment, Traffic signal equipment, Transportation equipment and Undersea equipment, or for any other application or use in which the failure of YAGEO products could result in personal injury or death, or serious property damage. Particularly YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight.

Information provided here is intended to indicate product specifications only. YAGEO reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN.