5D YAGEO

Document overview

  • PDF pages: 13

Technical content

Page 1

PDF page 1 diagram

DATA SHEET

POWER SUPPLY 05D series

RoHS compliant & Halogen free

Page 2

PDF page 2 diagram

Metal Oxide Varistor (MOV) Data Sheet

Features

PDF page 2 diagram

■ Wide operating voltage (V1mA) range from 18V to 750V ■ Fast responding to transient over-voltage ■ Large absorbing transient energy capability ■ Low clamping ratio and no follow-on current ■ Meets MSL level 1, per J-STD-020 ■ Operating Temperature:-40℃ ~ +105℃ ■ Storage Temperature:-40℃ ~ +125℃ ■ Safety certification:UL、CSA、VDE

Applications

■ Transistor, diode, IC, thyristor or triac semiconductor protection ■ Surge protection in consumer electronics ■ Surge protection in industrial electronics ■ Surge protection in electronic home appliances, gas and petroleum appliances ■ Relay and electromagnetic valve surge absorption

Part Number Code

4 7 1

K D 0 5

J

O

PDF page 2 diagram

Tolerance

Type

Surge Series

D: Disk

No suffix: Standard type

Varistor Voltage

J: High Surge type

180: 18V 101: 100V

Element Diameter 05

TR

Packing No suffix: Bulk TB: Tape & Box & P0=12.7mm TR: Tape & Reel & P0=12.7mm

Lead Shape No suffix: Straight leads O: Outside crimped leads F: Y Kinked leads

Page 3

PDF page 3 diagram

Dimensions

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

T

T

PDF page 3 diagram

O Type

Table 2 Unit: mm
Model T e Model T e
180K 1.5~4.5 1.3 221K 2.0~4.5 1.9
220K 1.6~4.6 1.4 241K 2.1~4.6 2.0
270K 1.6~4.7 1.6 271K 2.1~4.9 2.2
330K 1.7~4.9 1.5 301K 2.2~5.0 2.3
390K 1.6~4.8 1.6 331K 2.2~5.1 2.3
470K 1.7~4.9 1.7 361K 2.4~5.2 2.5
560K 1.8~5.0 1.9 391K 2.5~5.4 2.6
680K 1.9~5.2 2.2 431K 2.7~5.7 2.8
820K 1.6~4.1 1.6 471K 2.8~6.0 3.0
101K 1.9~4.3 1.8 511K 2.9~6.2 3.2
121K 1.9~4.5 2.0 561K 3.1~6.5 3.4
151K 1.7~4.8 1.6 621K 3.3~6.5 3.7
181K 1.8~4.3 1.7 681K 3.5~6.8 4.0
201K 1.9~4.4 1.8 751K 3.8~6.9 4.1
Table 1 Unit: mm
Symbol Dimension
H 5.5~10.0
H1 8.0~13.0
L(min.) 20.0
L1(min.) 15.0
D 5.0~7.5
F(±0.8) 5.0
T Table 2
e(±0.8) Table 2
d(±0.05) 0.6
d1(±0.4) 1.2

Page 4

PDF page 4 diagram

Electrical Characteristics

Part Number Maximum Allowable Voltage Varistor Voltage Maximum Clamping Voltage Withstanding Surge Current Maximum Energy (10/1000μs) Rated Power Typical Capacitance (Reference)
Standard High Surge V (V) AC V (V) DC V (V) 1mA I (A) P V (V) C I (A) Standard I (A) High Surge (J) Standard (J) High Surge (W) @1KHz (pf)
180KD05 180KD05J 11 14 18(15~21.6) 1 40 100 250 0.4 0.6 0.01 1400
220KD05 220KD05J 14 18 22(19.5~26) 1 48 100 250 0.5 0.7 0.01 1150
270KD05 270KD05J 17 22 27(24~31) 1 60 100 250 0.6 0.9 0.01 930
330KD05 330KD05J 20 26 33(29.5~36.5) 1 73 100 250 0.8 1.1 0.01 760
390KD05 390KD05J 25 31 39(35~43) 1 80 100 250 0.9 1.2 0.01 640
470KD05 470KD05J 30 38 47(42~52) 1 104 100 250 1.1 1.5 0.01 530
560KD05 560KD05J 35 45 56(50~62) 1 123 100 250 1.3 1.8 0.01 450
680KD05 680KD05J 40 56 68(61~75) 1 145 100 250 1.6 2.2 0.01 370
820KD05 820KD05J 50 65 82(74~90) 5 150 400 800 2.5 4.0 0.1 300
101KD05 101KD05J 60 85 100(90~110) 5 177 400 800 3.0 4.1 0.1 250
121KD05 121KD05J 75 100 120(108~132) 5 210 400 800 4.0 4.9 0.1 210
151KD05 151KD05J 95 125 150(135~165) 5 260 400 800 4.1 6.5 0.1 165
181KD05 181KD05J 115 150 180(162~198) 5 320 400 800 4.9 7.5 0.1 140
201KD05 201KD05J 130 170 200(180~220) 5 355 400 800 6.5 8.5 0.1 125
221KD05 221KD05J 140 180 220(198~242) 5 380 400 800 7.5 9.0 0.1 110
241KD05 241KD05J 150 200 240(216~264) 5 415 400 800 8.0 10.5 0.1 100
271KD05 271KD05J 175 225 270(243~297) 5 475 400 800 8.5 11.0 0.1 95
301KD05 301KD05J 190 250 300(270~330) 5 520 400 800 9.0 12.0 0.1 85
331KD05 331KD05J 210 275 330(297~363) 5 570 400 800 9.5 13.0 0.1 75
361KD05 361KD05J 230 300 360(324~396) 5 620 400 800 10.0 16.0 0.1 70
391KD05 391KD05J 250 320 390(351~429) 5 675 400 800 12.0 17.0 0.1 65
431KD05 431KD05J 275 350 430(387~473) 5 745 400 800 13.0 20.0 0.1 60
471KD05 471KD05J 300 385 470(423~517) 5 810 400 800 15.0 21.0 0.1 55
511KD05 511KD05J 320 415 510(459~561) 5 845 400 800 16.0 22.5 0.1 50
561KD05 561KD05J 350 460 560(504~616) 5 920 400 800 16.8 24.0 0.1 45
621KD05 621KD05J 385 505 620(558~682) 5 1025 400 800 17.7 25.0 0.1 40
681KD05 681KD05J 420 560 680(612~748) 5 1120 400 800 21.0 29.0 0.1 35
751KD05 751KD05J 460 615 750(675~825) 5 1240 400 800 22.4 32.0 0.1 30

Notes: 1. The tolerance of varistor voltage between 18V and 27V is more than 10%. 2. Leakage Current (@83% of V1mA):IR≤50μA (180K~680K) IR≤25μA (820K~751K)

Page 5

PDF page 5 diagram

Maximum Surge Current Derating Curve

180KD05 to 680KD05 10000 1000 (A) Current 100 1 2 10 Surge 102 103 10 104 Max. 105 106 1 0.1 10 100 1000 10000 Td (μs) 820KD05 to 751KD05 10000 1000 1 (A) 2 Current 100 10 102 103 104 Surge 105 10 106 Max. 1 0.1 10 100 1000 10000 Td (μs)
180KD05J to 680KD05J 10000 1000 (A) 1 Current 100 2 10 Surge 102 103 10 104 Max. 105 106 1 0.1 10 100 1000 10000 Td (μs) 820KD05J to 751KD05J 10000 1000 1 2 (A) 10 Current 102 100 103 104 105 Surge 106 10 Max. 1 0.1 10 100 1000 10000 Td (μs)

Page 6

PDF page 6 diagram

Maximum Leakage Current and Maximum Clamping Voltage Curve

PDF page 6 diagram

Page 7

PDF page 7 diagram

Maximum Leakage Current and Maximum Clamping Voltage Curve

PDF page 7 diagram

Page 8

PDF page 8 diagram

Reliability

Items Standard Test conditions / Methods Specifications
Tensile Strength of Terminals IEC60068-2-21 Gradually applying the force specified and keeping the unit fixed for 10±1 sec. Terminal diameter (mm) Force (kg) 0.5<d≤0.8 1.0 0.8<d≤1.25 2.0 1.25<d 4.0 No visible damage |ΔV 1mA/V1mA |≤5%
Bending Strength of Terminals IEC60068-2-21 Hold specimen and apply the force specified below to each lead. Bend the specimen to 90°, then return to the original position. Repeat the procedure in the opposite direction. Terminal diameter (mm) Force (kg) 0.5<d≤0.8 0.5 0.8<d≤1.25 1.0 1.25<d 2.0 No visible damage |ΔV 1mA/V1mA |≤5%
Vibration IEC60068-2-6 Frequency range: 10~55 Hz Amplitude: 0.75mm or 98m/s2 Direction: 3 mutually perpendicular directions, 2hrs each. No visible damage |ΔV 1mA/V1mA |≤5%
Solderability IEC60068-2-20 Solder Temp: 245±5℃ Dipping Time: 2±0.5 sec At least 95% of terminal electrode is covered by new solder
Resistance to Soldering Heat IEC60068-2-20 Solder Temp: 260±5℃ Dipping Time: 10±1 sec No visible damage |ΔV 1mA/V1mA |≤5%
High Temperature Storage IEC60068-2-2 Ambient Temp: 125±2℃ Duration: 1000±24hrs No visible damage |ΔV 1mA/V1mA |≤5%
Low Temperature Storage IEC60068-2-1 Ambient Temp: -40±2℃ Duration: 1000±24hrs No visible damage |ΔV 1mA/V1mA |≤5%
Damp Heat, Steady State IEC60068-2-78 The test is divided into two groups . a. 40±2℃ , 90~95% RH for 1344±24hrs b. 40±2℃ , 90~95% RH,at 10%VDC ,1344±24 hrs No visible damage |ΔV 1mA/V1mA|≤10% Insulation Resistance≧100MΩ
High Temperature Load MIL-STD-202 Method 108 Ambient Temp: 105±2℃ Duration: 1000±24hrs Load: Max. Allowable Voltage In AC. |ΔV 1mA/V1mA|≤10%
Temperature Cycle IEC60068-2-14 The conditions shown below shall be repeated 5 cycles Step Temperature (℃) Period (minutes) 1 -40±3 30±3 2 Room temperature 5±3 3 125±3 30±3 4 Room temperature 5±3 No visible damage |ΔV 1mA/V1mA |≤5%
8/20uS Surge Life IEC61051-1 8/20µS waveform,10 surge currents, unipolar, interval 30secs,amplitude corresponding to max. surge current derating curves for 20µS. No visible damage △Vb(1mA)≦±10%
10/1000µS Surge Life IEC61051-1 10/1000µS waveform,10 surge currents, unipolar, interval 2mins,amplitude corresponding to max. surge current derating curves for 1000µS. No visible damage |ΔV 1mA/V1mA |≤10%
Voltage Proof IEC61051-1 Metal balls method, 2500Vac 1 min. No visible damage
Step Temperature (℃) Period (minutes)
1 -40±3 30±3
2 Room temperature 5±3
3 125±3 30±3
4 Room temperature 5±3

Page 9

PDF page 9 diagram

Soldering Recommendation

PDF page 9 diagram
PDF page 9 diagram
PDF page 9 diagram
Item Conditions
Peak Temperature 265℃
Dipping Time 10 seconds (max.)
Soldering 1 time

Recommendation Reworking Conditions with Soldering Iron

PDF page 9 diagram
PDF page 9 diagram
Item Conditions
Temperature of Soldering Iron-tip 360℃ (max.)
Soldering Time 3 seconds (max.)
Distance from Varistor 2mm (min.)

Marking Code

PDF page 9 diagram

Page 10

PDF page 10 diagram

Taping Dimensions

P2 P h B W2 H0 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 12.7±1.0
P0 12.7±0.3
P1 3.85±0.7
P2 6.35±1.3
F 5.0±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H0 16.0±1.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 32max
P2 P h B W2 H0 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 12.7±1.0
P0 12.7±0.3
P1 3.85±0.7
P2 6.35±1.3
F 5.0±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H0 16.0±1.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 32max

Page 11

PDF page 11 diagram

Taping Dimensions

P2 P h B W2 H2 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 12.7±1.0
P0 12.7±0.3
P1 3.85±0.7
P2 6.35±1.3
F 5.0±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H2 20.0±2.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 32max

Quantity

Packaging Dimensions (Unit: mm) Quantity
In bulk for Terminals Untrimmed Products Max. 130 Max. 165 250 Max. 1000pcs/bag 4bags/box (180K~751K)
In bulk for Terminals Trimmed Products ax. M 66 Max. 165 252 Max. 1000pcs/bag 4bags/box (180K~751K)

Page 12

PDF page 12 diagram

Quantity

Packaging Dimensions (Unit: mm) Quantity
Tape & Box & P0=12.7mm ax. M 60 Max. 250 340 Max. 1500pcs/box (180K~391K)
1000pcs/box (431K~751K)
Tape & Reel & P0=12.7mm ax. M 60 Max. 365 365 Max. 55 Max. 30±1 Φ365 Max. 2000pcs/reel (180K~391K)
1500pcs/reel (431K~751K)

Page 13

PDF page 13 diagram

Legal Disclaimer

YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notice.

YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability.

YAGEO products are designed for general purpose applications under normal operation and usage conditions. Please contact YAGEO for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace equipment (artificial satellite, rocket, etc.), Atomic energy-related equipment, Aviation equipment, Disaster prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly public information network equipment, data -processing equipment , Medical devices, Military equipment, Power generation control equipment, Safety equipment, Traffic signal

equipment, Transportation equipment and Undersea equipment, or for any other application or use in which the failure of YAGEO products could result in personal injury or death, or serious property damage. Particularly YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight.

Information provided here is intended to indicate product specifications only. YAGEO reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN.