4504FE ETC2

Document overview

  • Manufacturer or author: Janssw
  • PDF pages: 2

Technical content

4504FE NON-PAIRED page 1/2 © Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner APPLICATION Intercom/PA Systems, Sound/Audio Systems. CONSTRUCTION 1. Conductor Diameter of conductor 0.75mm (AWG22) Material stranded bare copper (7xAWG30) 2. Insulation Material PE Diameter over insulation 1.25 ± 0.05 mm Wallthickness 0.25 mm 3. Overall Cabling Colour code black-red-white-green-brown-blue 4. Outer shield Shield Beldfoil®) Shield Material Aluminium / Polyester tape Shield Thickness Alu 9 µm Shield coverage 100% Drainwire AWG24 (7xAWG32) tinned Cu 4. Sheath Material FRNC Colour Grey Nominal thickness of sheath 0.38 mm Diameter over sheath 4.6 ± 0.30 mm REQUIREMENTS AND TEST METHODS Electrical: Nominal resistance conductor 54 Ω/km Nominal resistance shield 50 Ω/km Nom. capacitance conductor to conductor @ 1kHz 105 pF/m Nom. capacitance cond. to shield + other cond. @ 1kHz 185 pF/m Testvoltage conductor-conductor 2500 VDC, 3 seconds Testvoltage conductor-screen 2500 VDC, 3 seconds Voltage rating 300 V RMS Maximum continues current per conductor @ 25 °C 2.0 A per conductor @ 25 ˚C

4504FE NON-PAIRED page 2/2 © Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner Mechanical and physical: Temperature range processing and operating -20 to +70 ˚C Temperature range storage -30 to +70 ˚C Minimum bending/setting radius 5*D/10*D Maximum pulling tension 28 N Halogen free according to IEC 60754-1 Non dense smoke according to IEC 61034-1 and 61034-2 Non corrosive gas according to IEC 60754-2 Flame Retardant according to IEC 60332-1 MARKING NEW GENERATION(R) BY BELDEN 4504FE HALOGEN FREE 70C 6C22 SHIELDED + sequential meter marking.