VHEF-EST-M32-M-N18 FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Selector valve VHEF-EST-M32-M-N18

Part number: 4414806

PDF page 1 diagram
PDF page 1 diagram

Data sheet

Feature Value
Valve function 3/2, open/closed, monostable
Lap Zero overlap
Cover material PA-reinforced
Max. force on actuator 200 N
Max. transverse load on actuator 200 N
Operating pressure -0.095 MPa ... 1 MPa
Actuation type Manual
Width 20 mm
Standard nominal flow rate 750 l/min
Pneumatic working port 1/8 NPT
Operating pressure -0.95 bar ... 10 bar
Design Plate seat
Reset method Mechanical spring
Nominal width 5.6 mm
Type code VHEF
Exhaust air function With flow control option
Application note Operate by hand only
Sealing principle Soft
Mounting position Any
Type of control Direct
Flow direction Reversible
Symbol 00995893
Max. switching frequency 0.5 Hz
Explosion prevention and protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
Operating medium Compressed air as per ISO 8573-1:2010 [7:-:-]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC) 1 - Low corrosion stress
Temperature of medium -10 °C ... 60 °C
Ambient temperature -10 °C ... 60 °C
Actuating torque 0.4 Nm
Product weight 206 g
Type of mounting Optionally: Front panel mounting With through-hole

4/22/21 - Subject to change - Festo AG & Co. KG

1/2

Page 2

Feature Value
Pneumatic connection 1 1/8 NPT
Pneumatic connection 2 1/8 NPT
Pneumatic connection 3 1/8 NPT
Note on materials RoHS-compliant
Seals material NBR
Housing material Wrought aluminum alloy, anodized
Lever material PA-reinforced

4/22/21 - Subject to change - Festo AG & Co. KG

2/2