4300FE ETC2
Document overview
- Manufacturer or author: Janssw
- PDF pages: 2
Technical content
4300FE NON-PAIRED page 1/2 © Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner APPLICATION Commercial applications shielded CONSTRUCTION 1. Conductor Diameter of conductor 1.22mm (AWG18) Material stranded bare copper (7xAWG26) 2. Insulation Material PE Diameter over insulation 1.72 ± 0.05 mm Wallthickness 0.25 mm 3. Overall Cabling Colour code black – red 4. Outer shield Shield Beldfoil®) Shield Material Aluminium / Polyester tape Shield Thickness Alu 9 µm Shield coverage 100% Drainwire AWG20 (7xAWG28) tinned Cu 4. Sheath Material FRNC Colour Grey Nominal thickness of sheath 0.38 mm Diameter over sheath 4.2 ± 0.30 mm REQUIREMENTS AND TEST METHODS Electrical: Nominal resistance conductor 21.3 Ω/km Nominal resistance shield 23.6 Ω/km Nom. capacitance conductor to conductor @ 1kHz 125 pF/m Nom. capacitance cond. to shield + other cond. @ 1kHz 224 pF/m Testvoltage conductor-conductor 2500 VDC, 3 seconds Testvoltage conductor-screen 2500 VDC, 3 seconds Voltage rating 300 V RMS Maximum continues current per conductor @ 25 °C 3.5 A per conductor @ 25 ˚C
4300FE NON-PAIRED page 2/2 © Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner Mechanical and physical: Temperature range processing and operating -20 to +70 ˚C Temperature range storage -30 to +70 ˚C Minimum bending/setting radius 5*D/10*D Maximum pulling tension 26 N Halogen free according to IEC 60754-1 Non dense smoke according to IEC 61034-1 and 61034-2 Non corrosive gas according to IEC 60754-2 Flame Retardant according to IEC 60332-1 MARKING NEW GENERATION(R) BY BELDEN 4300FE HALOGEN FREE 70C 2C18 SHIELDED + sequential meter marking.