DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 1

Technical content

DESCRIPTION

GENERAL TOLERANCE Basic materialProjection Drawing.- No. c from PA66 change to LCP 13-05-22 DaF d Washable Definition 14-03-05 WS-ROSV Rotary Switch 10x10mm, 10 position, SMD version 42852142091x 42852142091x.dft 09-11-06 Jelisarow 2:1 System :Solid Edge V20 WE eiCan CAD Würth Elektronik eiCan .x = +/- 0,2 .xx = +/- 0,15 SIZE 11-09-30 warning text aWJ 12-02-02 new contact rating b WJ DaF This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. e revised MatchCode 14-07-25 AL Checked Drawn Hsu09-11-06 14,60 2,60 5,08 1,20 C 4 1 C 28 RECOMMENDED LAYOUT TECHNICAL CHARACTERISTICS SPECIFICATION >Contact Rating: Switching: 150mA, 24VDC Non-Switching: 400mA, 24VDC >Contact Resistance: Initial: 80mOHM max. After Life Test: 200mOHM max. >Insulation Resistance: min. 100MOHM at 250VDC >Dielectric Strength: 250VAC for 1 minute >Operating Force: 700g max. >Life cycle: 10.000 steps >Position: 10 >Actuator: Shaft type MATERIAL >Cover: LCP UL 94V-0, color grey >Base: LCP UL 94V-0, color grey >Actuator: LCP UL 94V-0 >Contact: Gold Plated >Terminal: Gold Plated SOLDERINGINFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air WASHABLEDEFINITION Please do not submerse washable products into water or cleaning agents or put them in locations exposed to water or liquids completely. When cleaning by hand (brushing), please do not use excessive force on our switch to avoid malfunction afterwards, because you could deform function relevant areas or you could damage sealing functions. Do not clean washable series immediately after soldering. The cleaning agent may be absorbed into the switch through respiration while the switch cools. ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach PACKAGINGINFORMATION >Tube C 1 2 4 8 0  0 1   1 2   2 3    3 4   4 5    5 6    6 7     7 8   8 9    9 C 1 2 4 8 1     1 2     2 3    3 4     4 5    5 6    6 7   7 8     8 9    9 Real Code

10 Position

6,50 7,30 2,20 6,80 12,000,54 5,08 10,00 10,00 4,10 Part number Color of Actuator Position Code 428 521 420 910 light grey 10 Real Code 428 521 420 911 blue 10 complement codeScale - 2:1 h 0,10 Ref. 9,60 ±0,1