EMME-AS-100-MK-HS-AMX FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Servo motor EMME-AS-100-MK-HS-AMX

Part number: 4267602

PDF page 1 diagram

Data sheet

Feature Value
Number of pole pairs 3
Type code EMME-AS
Rotor position sensor Safety encoder, absolute multi-turn
Rotor position sensor interface HIPERFACE®
Rotor position sensor measuring principle Optical
Safety Integrity Level (SIL), subcomponent SIL 2, rotor position sensor SILCL 2, rotor position sensor
Performance Level (PL), subcomponent Category 3, performance level d, rotor position sensor
PFHd, subcomponent 1.3 x 10E-8, rotor position sensor
Duration of use Tm, subcomponent 20 years, rotor position sensor
Max. rotational speed 3941 1/min
Nominal rotary speed 3000 1/min
Continuous stall current 4.6 A
Insulation protection class F
Motor constants 1.561 Nm/A
Nominal operating voltage DC 565 V
Motor nominal power 2000 W
DC nominal voltage 565 V
Motor nominal current 4.1 A
Typical rotor position sensor resolution 15 bit
Rotor position encoder, typical angular accuracy 20 arcmin
Rotor position encoder, sinusoidal/cosinusoidal periods per revolution 128
Phase-phase winding resistance 3.2 Ohm
Winding inductance phase-phase 12 mH
Type of winding switch Star inside
Peak current 18.4 A
Voltage constant, phase-to-phase 101.4 mVmin
Rating class according to EN 60034-1 S1
CE marking (see declaration of conformity) As per EU EMC directive As per EU low voltage directive
Corrosion resistance class (CRC) 0 - No corrosion stress
Storage temperature -20 °C ... 70 °C
Relative air humidity 0 - 90 %
Degree of protection IP21
Ambient temperature -10 °C ... 40 °C

12/22/20 - Subject to change - Festo AG & Co. KG

1/2

Page 2

Feature Value
Certification RCM compliance mark c UL us - Recognized (OL)
Total output inertia moment 6.41 kgcm²
Nominal torque 6.4 Nm
Peak torque 30 Nm
Stall torque 7.5 Nm
Permissible axial shaft load 136 N
Permissible radial shaft load 680 N
MTTFd, subcomponent 874 years, rotor position sensor
Product weight 7550 g
Electrical connection technology Plug
Note on materials Contains paint-wetting impairment substances RoHS-compliant
Conforms to standard IEC 60034
Featherkey shaft design DIN 6885 A 6 x 6 x 32

12/22/20 - Subject to change - Festo AG & Co. KG

2/2