EMME-AS-80-SK-LS-AMX FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Servo motor EMME-AS-80-SK-LS-AMX

Part number: 4267582

PDF page 1 diagram

Data sheet

Feature Value
Number of pole pairs 3
Type code EMME-AS
Rotor position sensor Safety encoder, absolute multi-turn
Rotor position sensor interface HIPERFACE®
Rotor position sensor measuring principle Optical
Safety Integrity Level (SIL), subcomponent SIL 2, rotor position sensor SILCL 2, rotor position sensor
Performance Level (PL), subcomponent Category 3, performance level d, rotor position sensor
PFHd, subcomponent 1.3 x 10E-8, rotor position sensor
Duration of use Tm, subcomponent 20 years, rotor position sensor
Max. rotational speed 4690 1/min
Nominal rotary speed 3000 1/min
Continuous stall current 3.1 A
Insulation protection class F
Motor constants 0.923 Nm/A
Nominal operating voltage DC 360 V
Motor nominal power 750 W
DC nominal voltage 360 V
Motor nominal current 2.6 A
Typical rotor position sensor resolution 15 bit
Rotor position encoder, typical angular accuracy 20 arcmin
Rotor position encoder, sinusoidal/cosinusoidal periods per revolution 128
Phase-phase winding resistance 4.6 Ohm
Winding inductance phase-phase 9.46 mH
Type of winding switch Star inside
Peak current 12.4 A
Voltage constant, phase-to-phase 54.3 mVmin
Rating class according to EN 60034-1 S1
CE marking (see declaration of conformity) As per EU EMC directive As per EU low voltage directive
Corrosion resistance class (CRC) 0 - No corrosion stress
Storage temperature -20 °C ... 70 °C
Relative air humidity 0 - 90 %
Degree of protection IP21
Ambient temperature -10 °C ... 40 °C

12/22/20 - Subject to change - Festo AG & Co. KG

1/2

Page 2

Feature Value
Certification RCM compliance mark c UL us - Recognized (OL)
Total output inertia moment 1.4 kgcm²
Nominal torque 2.4 Nm
Peak torque 11.2 Nm
Stall torque 2.8 Nm
Permissible axial shaft load 70 N
Permissible radial shaft load 350 N
MTTFd, subcomponent 874 years, rotor position sensor
Product weight 3050 g
Electrical connection technology Plug
Note on materials Contains paint-wetting impairment substances RoHS-compliant
Conforms to standard IEC 60034
Featherkey shaft design DIN 6885 A 6 x 6 x 22

12/22/20 - Subject to change - Festo AG & Co. KG

2/2