42-21A-GHC-YX1Y2N-1T EVERLIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 10

Technical content

Features

․Package in 12mm tape on 7«diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 42-21A SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications, etc.

Applications

․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide ChipPart No. Material Emitted Color Lens Color 42-21A/GHC-YX1Y2N/1T InGaN Brilliant Green Water Clear

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:15:56.0 EVERLIGHT ELECTRONICS CO.,LTD. 42-21A/GHC-YX1Y2N/1T Device No. : DSE-42A-G04 Prepared date: 11-Apr-2007 Prepared by: Esther Yan Package Outline Dimensions - + Note: The tolerances unless mentioned is Ô0.1mm, Unit = mm

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:15:56.0 EVERLIGHT ELECTRONICS CO.,LTD. 42-21A/GHC-YX1Y2N/1T Device No. : DSE-42A-G04 Prepared date: 11-Apr-2007 Prepared by: Esther Yan Absolute Maximum Ratings (Ta=25Ċ) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 Ċ Storage Temperature Tstg -40 ~ +90 Ċ Soldering Temperature Tsol Reflow Soldering : 260 Ċ for 10 sec. Hand Soldering : 350 Ċ for 3 sec. Electro-Optical Characteristics (Ta=25Ċ) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 1800 ----- 4500 mcd Viewing Angle 2ǀ1/2 ----- 30 ----- deg Peak Wavelength ǃp ---- 518 ---- nm Dominant Wavelength ǃd 520 ---- 535 nm Spectrum Radiation Bandwidth ¶ǃ ---- 35 ---- nm Forward Voltage VF 2.7 ---- 3.7 V IF=20mA Reverse Current IR ----- ----- 50 DŽA VR=5V Notes: 1.Tolerance of Luminous Intensity Ô11% 2.Tolerance of Dominant Wavelength Ô1nm 3.Tolerance of Forward Voltage Ô0.1V

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:15:56.0 EVERLIGHT ELECTRONICS CO.,LTD. 42-21A/GHC-YX1Y2N/1T Device No. : DSE-42A-G04 Prepared date: 11-Apr-2007 Prepared by: Esther Yan Bin Range Of Dom. Wavelength Group Bin Min Max Unit Condition X 520 525 Y 525 530Y Z 530 535 nm IF=20mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition X1 1800 2250 X2 2250 2850 Y1 2850 3600 Y2 3600 4500 mcd IF=20mA Bin Range Of Forward Voltage Group Bin Min Max Unit Condition 10 2.70 2.90 11 2.90 3.10 12 3.10 3.30 13 3.30 3.50 N 14 3.50 3.70 V IF=20mA Notes: 1.Tolerance of Luminous Intensity Ô11% 2.Tolerance of Dominant Wavelength Ô1nm 3.Tolerance of Forward Voltage Ô0.1V

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:15:56.0 EVERLIGHT ELECTRONICS CO.,LTD. 42-21A/GHC-YX1Y2N/1T Device No. : DSE-42A-G04 Prepared date: 11-Apr-2007 Prepared by: Esther Yan Typical Electro-Optical Characteristics Curves

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:15:56.0 EVERLIGHT ELECTRONICS CO.,LTD. 42-21A/GHC-YX1Y2N/1T Device No. : DSE-42A-G04 Prepared date: 11-Apr-2007 Prepared by: Esther Yan Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is Ô0.1mm, Unit = mm

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:15:56.0 EVERLIGHT ELECTRONICS CO.,LTD. 42-21A/GHC-YX1Y2N/1T Device No. : DSE-42A-G04 Prepared date: 11-Apr-2007 Prepared by: Esther Yan Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel Note: The tolerances unless mentioned is Ô0.1mm ,Unit = mm. Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:15:56.0 EVERLIGHT ELECTRONICS CO.,LTD. 42-21A/GHC-YX1Y2N/1T Device No. : DSE-42A-G04 Prepared date: 11-Apr-2007 Prepared by: Esther Yan Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence levelj90% LTPDj10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260ĊÔ5Ċ Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100Ċ 15min í 5 min L : -40Ċ 15min 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100Ċ 5min í 10 sec L : -10Ċ 5min 300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100Ċ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40Ċ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85Ċ/ 85%RH 1000 Hrs. 22 PCS. 0/1

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:15:56.0 EVERLIGHT ELECTRONICS CO.,LTD. 42-21A/GHC-YX1Y2N/1T Device No. : DSE-42A-G04 Prepared date: 11-Apr-2007 Prepared by: Esther Yan Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 Ċ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30Ċ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60Ô5Ċ for 24 hours. 3. Soldering Condition

3.1 Pb-free solder temperature profile

120 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:15:56.0 EVERLIGHT ELECTRONICS CO.,LTD. 42-21A/GHC-YX1Y2N/1T Device No. : DSE-42A-G04 Prepared date: 11-Apr-2007 Prepared by: Esther Yan 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 Ċ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com