DFM-6-5-P-A-GF FESTO

Document overview

  • PDF pages: 1

Technical content

Page 1

Guided actuator DFM-6-5-P-A-GF

Part number: 4149944

PDF page 1 diagram

Data sheet

Feature Value
Distance of centre of gravity of payload to yoke plate xs 10 mm
Max. permissible torque load Mx as a function of the stroke 0.011 Nm
Stroke 5 mm
Piston diameter 6 mm
Type code DFM
Drive unit operating mode Yoke
Cushioning Elastic cushioning rings/pads at both ends
Mounting position Any
Guide Sliding guide
Design Guide
Position sensing For proximity sensor
Symbol 00991737
Operating pressure 2 bar ... 8 bar
Max. speed 1.3 m/s
Mode of operation Double-acting
Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC) 1 - Low corrosion stress
Ambient temperature -10 °C ... 60 °C
Impact energy in the end positions 0.012 J
Max. payload as a function of the stroke at defined distance xs 1.1 N
Theoretical force at 6 bar, retracting 13 N
Theoretical force at 6 bar, advancing 17 N
Torsional backlash 0.1 deg
Moving mass 8 g
Product weight 28 g
Pneumatic connection M3
Note on materials RoHS-compliant
Cover material High-alloy stainless steel
Seals material NBR
Material of dynamic seals HNBR
End plate material Wrought aluminum alloy, anodized
Guide rod material High-alloy stainless steel
Housing material Wrought aluminum alloy, anodized
Piston rod material High-alloy stainless steel

10/22/20 - Subject to change - Festo AG & Co. KG

1/1