40PT_18 NELLSEMI
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
A K A G Page 1 of 5 40PT Series RoHS RoHS Stansard SCRs, 40A Main Features Symbol Value Unit IT(RMS) V /VDRM RRM IGT 40 A V mA4 to 60 600 to 1600
DESCRIPTION
www.nellsemi.com The 40PT series of silicon controlled rectifiers are high performance glass passivated technology, and are suitable for general purpose applications, where in-rush current conditions are critical such as overvoltage crowbar protection circuits in power supplies, in-rush current limiting circuits, solid state relay in back to back configuration, welding SYMBOL IT(RMS) RMS on-state current full sine wave ITSM Non repetitive surge peak on-state current (full cycle, T initial = 25°C)j A 2I t 2I t Value for fusing 1058 2A s dI/dt Critical rate of rise of on-state current IGMPeak gate current PG(AV)Average gate power dissipation TstgStorage temperature range Operating junction temperature range - 40 to + 150 - 40 to + 125 ºC A/µs A A W UNITV ALUE 460 F =50 Hz F =60 Hz t = 20 ms t = 16.7 ms t = 10 msp F = 60 Hz T =125ºCj T = 125ºCj T = 125ºCj T = 20 µsp Tj ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS V600 to 1600 T =125ºCj VDRM VRRM Repetitive peak off-state voltage Repetitive peak reverse voltage (180° conduction angle ) Average on-state current (180° conduction angle) IT(AV) 25 A I = 2xl , t ≤100nsG GT r TO-3P/TO-247 TO-220AB/TO-263 T =95°Cc T =90°Cc Maximum gate power PGM W10T =20µsp T = 125ºCj TO-220AB insulated/TO-3P insulated T =95°Cc T =90°Cc 480 Base on a clip assembly technology, they offer a superior performance in surge current capabilities. TO-3P/TO-247 TO-220AB/TO-263 TO-220AB insulated/TO-3P insulated Maximum peak reverse gate voltage VRGM 5 V T =80°Cc T =80°Cc TO-220AB non-Insulated)( TO-3P (non-Insulated) A A G K 2TO-263 (D PAK) K A G A (40PTxxH) (40PTxxA) (40PTxxB) KA G TO-220AB (lnsulated) TO-3P (Insulated) K A G (40PTxxAI) (40PTxxBI) TO-247 non-Insulated)( (40PTxxC) equipment and high power motor control. K A G 3(G) 1(K) 2(A)
V = 12V, R = 33ΩD L V = V , R = 3.3K Ω, R = 220 ΩD DRM L GK I = 500mA, Gate openT I = 1.2 ×IG GT V = 67% V Gate openD DRM , 0.2 700 mA V V mA V/µs I = 80A, t = 380µsT P T = 125°Cj T = 25°Cj T = 25°Cj V µA ELECTRICAL SPECIFICATIONS ( T = 25 ºC unless otherwise specified)J TEST CONDITIONS SYMBOL V =V , V =VD DRM R RRM 1.6 4R = 220ΩGK Max. Max. Min. Max. Max. Min. Max. Max. Max. THERMAL RESISTANCE UNITV ALUESYMBOL Parameter VGT V0.85Vto T = 125°Cj PRODUCT SELECTOR PART NUMBER VOL T AGE (xx) SENSITIVITY 600 V 35 mA 1000 V 40PTxxA/40PTxxAl 40PTxxH VV 800 V V PACKAGE TO-220AB V V 2D PAK 35 mA Rd mΩT = 125°Cj T = 125°Cj T = 125°Cj Max. Max. 10 Threshold Voltage Dynamic Resistance Min. 1.3 V 1200 V V V V V VV VV V V 40PTxxB/40PTxxBI 40PTxxC 35 mA 35 mA TO-3P TO-247 1600 V V V V V Rth(j-c) Junction to case (DC) Rth(j-a) Junction to ambient 0.8 2S = 1 cm 0.9 2D PAK/TO-220AB/TO-3P/TO-247 TO-220AB insulated/TO-3P insulated 2TO-263(D PAK) TO-220AB/TO-220AB insulated TO-3P/TO-247/TO-3P insulated °C/W °C/W S=Copper surface under tab DELIVERY MODE Tube Tube Tube ,BASE Q TY WEIGHT 2.0g 2.3g 2.0g TO-220AB (insulated) 2TO-263(D PAK) PACKAGE TO-220AB 40PTxxB 40PTxxBI 40PTxxC MARKING
ORDERING INFORMATION
Note: xx = voltage ORDERING TYPE 40PTxxA 40PTxxAI 40PTxxH 40PTxxB 40PTxxBI 40PTxxC 40PTxxA 40PTxxAI 40PTxxH TO-3P insulated TO-3P TO-247 4.3g 4.8g Tube Tube Tube 40PT08XX 40PT10XX 40PT12XX 40PT16XX 1000 100 1000 100 150 Page 2 of 5www.nellsemi.com
ORDERING INFORMATION SCHEME SCR series Package type Current V oltage Code A = TO-220AB (non-insulated) AI = TO-220AB ( insulated) 40 = 40A, IT(RMS)
40 PT 06
06 = 600V B = TO-3P (non-insulated) 08 = 800V 10 = 1000V 12 = 1200V 16 = 1600V BI = TO-3P ( insulated) C = TO-247 2H = TO-263 (D PAK) Fig.1 Maximum average power dissipation versus average on-state current. P(W) 0 5 10 15 20 25 30 α=180° 360° αI (A)T(AV) Fig.2 RMS on-state current versus case temperature. 0 25 50 75 100 125 IT(RMS) T (°C)case TO-3P TO-247AB TO-220AB TO-263 TO-220AB insulated TO-3P insulated D.C. Fig.3 Relative variation of thermal impedance versus pulse duration. 1.00 0.10 0.01 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+3 K=[Z /R ]th th Zth(j-c) Zth(j-a) t (s)P Fig.4 Relative variation of gate trigger current, holding current and latching current versus junction temperature. 120 140-40 1000 20 40 60 80-20 0.0 0.5 1.0 1.5 2.0 2.5 lGT l &lH L T (°C)j l ,l ,l [T ] / l ,l ,l [T =25°C]GT H L j GT H L j Page 3 of 5www.nellsemi.com
Fig.5 Surge peak on-state current versus number of cycles. Fig.6 Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms, and corresponding 2 values of l t . Fig.7 On-state characteristics (maximum values) 500 400 300 200 100 1 10 100 1000 5000 1000 100 500 100 I (A)TM I (A)TSM 2 2I (A), l t (A s)TSM 150 250 350 450 t = 10msp One cycle Non repetitive T initial = 25°Cj Repetitive T = 95°Cc Number of cycles 0.01 0.10 1.00 10.00 T (ms)p dl/dt limitation lTSM 2l t T initial = 25°Cj T = maxj T = 25°Cj V (V)TM T = max.:j V =0.85Vto R = 10mΩd 2.87 (0.113) 2.62 (0.103) 9.40 (0.370) 9.14 (0.360) 10.54 (0.415) MAX. 16.13 (0.635) 15.87 (0.625) PIN 4.06 (0.160) 3.56 (0.140) 1.45 (0.057) 1.14 (0.045) 2.67 (0.105) 2.41 (0.095) 2.65 (0.104) 4.95 (0.195) 0.90 (0.035) 0.70 (0.028) 3.91 (0.154) 3.74 (0.148) K G A 4.70 (0.185) 4.44 (0.1754) 1.39 (0.055) 1.14 (0.045) 3.68 (0.145) 3.43 (0.135) 8.89 (0.350) 8.38 (0.330) 29.16 (1.148) 28.40 (1.118) 14.22 (0.560) 13.46 (0.530) 0.56 (0.022) 0.36 (0.014) 2.79 (0.110) 2.54 (0.100) 15.32 (0.603) 14.55 (0.573) TO-220AB Case Style 3(G) 1(K) 2(A) Page 4 of 5www.nellsemi.com
2TO-263(D PAK) Anode TO-247 2.79 (0.110) 0.36 (0.014) 2.79 (0.110) 2.29 (0.090) 1.40 (0.055) 1.19 (0.047) 0 to 0.254 (0 to 0.01) 1.40 (0.055) 1.14 (0.045) 4.83 (0.190) 4.06 (0.160) 10.45 (0.411) 9.65 (0.380) 6.22 (0.245) 9.14 (0.360) 8.13 (0.320) 15.00 (0.591) 0.940 (0.037) 0.686 (0.027) 2.67 (0.105) 2.41 (0.095) 5.20 (0.205) 4.95 (0.195) 15.85 (0.624) 3.56 (0.140) 0.53 (0.021) 5.38 (0.212) 6.20 (0.244) 15.49 (0.610) 16.26 (0.640) 16.15 (0.242) 20.80 (0.819) 21.46 (0.845) 20.10 (0.791) 20.47 (0.805) 4.50 (0.177)Max 1.01 (0.040) 1.40 (0.055) 1.65 (0.065) 2.13 (0.084) 2.87 (0.113) 3.12 (0.123) 3.55 (0.138) 3.81 (0.150) 0.40 (0.016) 0.79 (0.031) 2.21 (0.087) 2.59 (0.102) 1.49 (0.059) 2.49 (0.098) 4.69 (0.185) 5.31 (0.209) (TYP.) (TYP.) Case Style K G A TO-3P 2.90 (0.114) 2.70 (0.106) 0.70 (0.028) 0.50 (0.020) 1.55 (0.061) 1.45 (0.057) 4.60 (0.181) 4.40 (0.173) 5.65 (0.222) 5.40 (0.213) 5.65 (0.222) 5.40 (0.213) 15.60 (0.614) 14.35 (0.565) 16.50 (0.650) 15.80 (0.622) 21.10 (0.831) 20.40 (0.803) Φ4.17 (0.164) 4.08 (0.160) 15.50 (0.610) 15.10 (0.594) R 4.60 (0.181) 3.65 (0.144) 3.40 (0.134) 1.40 (0.055) 1.20 (0.047) K A G 3(G) 1(K) 2(A) K A G A Page 5 of 5www.nellsemi.com