403W3CSXX61A10X CONEC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 1
Technical content
dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1062 D-SUB COMBINATION FEMALE Henneboel22.06.12
22.06.12 Fischer
for installation into water resistant hood SEE NOTES 2:1 (5:1) 403W3CSXX61A10X a Original 24,74 - 0,2 0,05+ 33,3 - 0,1 0,15+ 39,22 - 0,46 0,3+ 12,6 -0,43 0,33 10° 3 - 0 0,2+n 1,2 0,2 SEE NOTE 6 8 - 0,23 0,02+ 6,13 -0,08 0,17 +0,8 16,65 -0,4 0,1 1,8n (3x) ( 5 : 1 ) SEALING COMPOUND NOTES: 1. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 2. INSULATOR: PBT GF UL 94 V-0, GREEN 3. HIGH POWER CONTACTS 10A: COPPER ALLOY PLATING MATING AREA: GOLD FLASH over NICKEL PLATING TERMINATION SIDE: GOLD FLASH over NICKEL SOLDER CUP ACCEPTS CABLE AWG 16-20 4. SEALING COMPOUND: PUR; BLUE 5. FEMALE CONTACTS ON POS. A1 + A3; MALE CONTACT ON POS. A2 6. CONNECTOR IS PART MARKED: 403W3CSXX61A10X CONE C ABC Directive 2002/95/EC RoHS compliant Solder Instruction 1. Cable should be prepared for soldering. The cable/wires must be pretinned. 2. Insert cable/wire into solder cup. 3. Operate the soldering iron at 350° C, 100 Watt max. and use a pencil tip. 4. Put tip to wire in solder cup. 5. After 1 second bring in solder. 6. Heat for 5 seconds longer. Do not heat contact more than 6 seconds in total. 7. Remove soldering iron. 8. Wait until solder gets rigid again. 9. Do not solder adjacent contacts consecutively, alternate position within the connector to minimize heat build up.