4034

4033 ETC2

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

The 4033 and 4034 arehighperformance pro - gramm ablepulsegenerators fortestingdigital systems and circuits basedon TTL, CMOS, or ECL technologies.Both instruments generate clean and accurate pulsesatup to6 digitsreso - lutionwith a repetition rateup to50 MH z,vari - ablepulse widths from 10 ns to10 s,and pulse delaysfrom0 ns to10 s.Ou tputlevelsare adjustablefrom -10 V to+ 10 V ,with pulse amp litudessettablefrom 0.1Vpp to 10 Vpp into a 50 ohm load.Allparameters,m odes,and functions are programm ableviathe frontpanel orremote controlcom mands.Additionally,the pulse generators provideselectable complemen - tarypulse and doublepulsegenerationincontin - uous, triggered,gated,and countedburst mo des.

50 MH z Programmab lePulseG enerators

Mo dels4033 & 4034 Description Features& Benefits

Applications

ww ww ww ..bbkkpprreecciissiioonn..ccoomm I Repetition rate of 0.1 Hz to 50 MHz I Flexible trigger modes: Continuous, Triggered (internal, external, manual), Gated Burst and External Width I Pulse width programmable from 10 ns to 10 s I Transition times (rise and fall times) variable from 6 ns to 100 ms I Program mable delay and double pulse I Predefined amplitude levels for ECL, TTL, and CM O S signals I Store up to 99 different test setups with auto retention of last power down setup I 10 Vpp into 5 0 ohm output I Closed case calibration I Program mable via GPIB and RS-232 I SCPI compatible I Three year warranty I A utoma tic T est Equipment (ATE ) I A vionics and radar testing I Switching power supply testing I Characterization of active components Dual-Channel M odel 4034 I Bo th channels offer full functionality and all parame ters such as pulse width and transition time can be set independently I Synchronize both channels with the push of a button I Saves cost and bench space Technical data subject to change © B& K Precision Corp. 2010

22 ww ww ww ..bbkkpprreecciissiioonn..ccoomm

50 MH z Program ma ble Pulse G enerators

M odels 4033 & 40 34 Front Panel Interface For added flexibility, variable rise and fall times can be programm ed from 6 ns to 100 ms. Various shapes of pulses can be obtained for applications where parameters such as linearity, switching times, or reflection times must be ana - lyzed. Programmable rise and fall times could be used to measure operational amplifier slew rates and easily test thresholds of devices and circuits. Variable Transitions In the external width pulse mode, pulse period and width are determ ined by an externally applied signal. The pulse generator then applies transition and level parameters to this signal in order to generate the pulse. A pow er supply designer for exam ple could use this feature to shape the width and period of the output signal to drive the power supply’s FET transistors while rem aining synchronized with its control circuits. External Width These generators use a menu-driven front panel keypad and control knob to adjust all parameters. The bright, easy-to-read display shows all rele - vant parameters along with a graphical represen - tation of the output pulse. If an entered parame - ter is not compa tible with the existing setup sta - tus, the operator is informed by an error mes - sage. U sers can conveniently select predefined ampli - tude levels for TTL, ECL, and CMOS signals, or choose a custom am plitude level for specialized applications. Straightforward User Interface Industry Leading Performance F1-F5 Key – Select menu options that appear on the bottom section of the LCD display Menu Keys – Selects menu options for waveform parameters Output On Button – T urns the main output signal on or off

4033 Output Section –

Manual Trigger Key – Sends manual trigger pulse when pushed (requires instrument to be in manual trigger mode)

33 ww ww ww ..bbkkpprreecciissiioonn..ccoomm M odels 4033 & 40 34 v092710_1 The specifications describe the instrument performance after 30 minutes warm -up period into a 50 Ω load. All timing characteristics are measured at 50% of amp litude with fastest edges. OO PPEERRAA TTIINN GG MM OO DD EESS Continuous Output continuous at programme d period rate Triggered Output quiescent until triggered by an internal, external, GPIB or manual trigger, then generates one cycle at programmed period rate Gated Sam e as triggered mode except pulses are output for the dura - tion of the gated signal. The last cycle started is completed Burst Sam e as triggered mode for programm ed number of cycles from 2 to 999,999 as set by the N-B URS T function External Width Trigger duration and rate sets pulse width and repetition PPUU LLSSEE FF UU NN CC TTIIOO NN SS Single O ne pulse at each selected period up to 50 MH z repetition rate Doub le On e pair of pulses at each period up to 25 MH z repetition rate. Bo th pulses have the same selected width; the position of the second pulse set by the delay control. TT IIMM IINN GG CC HH AA RRAA CC TT EERRIISSTT IICC SS PERIO D Range (single pulse) 20 ns to 10 s (50 MH z to 0.1 Hz repetition rate) Range (double pulse) 40 ns to 10 s (25 MH z to 0.1 Hz repetition rate) Resolution Up to 6 digits, limited to 100 ps A ccuracy ±0.01 % Jitter < 0.01 % of setting + 20 ps on Period, Width and Delay WI DTH Range 10 ns to (Period – 10 ns) Resolution Up to 6 digits, limited to 100 ps A ccuracy ±(0 .5% of setting +500 ps ) Do uble Pulse ±(0 .5% of setting +3 ns) for the second pulse DEL AY Range 0 ns to (Period – Width – 10 ns) Resolution Up to 6 digits, limited to 100 ps Acc uracy ±(0 .5% of setting +500 ps ) DU TY CYCLE Range 1 to 99% Resolution 3 digits (0.1%) Acc uracy Limited by width and pulse accuracy OO UU TTPPUU TT CC HH AA RRAA CC TT EERRIISSTT IICC SS AM PLITU DE High Level Range -9.90 V to +1 0 V into 50 Ω load (-19.80 V to + 20 V into open circuit) Low Level Range -10 V to + 9.90 V into 50 Ω load (-20 V to + 19.80 V into open circuit) Am plitude Range 0.1 V to 10 V p-p into 50 Ω load (20 V p-p max into open circuit) Resolution 3 digits limited to 10 mV Acc uracy ± 1% of setting ±1 0 mV into 50 Ω Ab errations <5 % + 20 mV into 50 Ω load, for pulse levels between ±5V Output Resistance 5 0 Ω Offset Accuracy ±1% ±2 5 mV MM ooddeellss 44 00 3333 44 003344 CHAN NE LS 1 2 FREQ U EN CY 0.1 Hz to 50 MHz TT RRAA NN SSIITT IIOO NN TT IIMM EE SS Range <6 ns to 100 ms variable. Leading and trailing edges settable separately and limited to 20:1 ratio between settings into one of the following ranges: 5 ns-100 ns; 50 ns-1.0 us; 500 ns-10 us; 5 .0 us-100 us; 50 us-1.0 ms; 500 us-10 ms, 5 ms – 100 ms Resolution 3 digits limited to 10 ps Ac curacy ±(5 % of setting +2 ns) Linearity <5 % deviation from a straight line between 10% and 90% points, for transitions > 50 ns IINN TT EERRNN AA LL TTRRIIGG GG EERR Range 100 ns to 100 s Resolution 4 digits limited to 100 ns Ac curacy ±0.01% IINN PPUU TT AA NN DD OO UU TT PPUU TT TRIGGER INPUT Sensitivity 200 mV pp minimum Minimum Wi dth 10 ns Maximum Rate 50 M H z Input Impedance 10 k Ω Input Protection ±1 5V DC plus peak AC Range Selectable from -10 V to + 10 V Resolution 3 digits limited to 10 mV Slope Selection Positive or Negative SYN C O UTPUT A TTL level pulse at the programmed period. Output impedance is 50 Ω, protected against short circuit and up to ± 15 V accidental input. The high level is > 2 V into 50 Ω and with 3.5 ns typical transition times. RREE MM OO TT EE PPRROO GG RRAA MM MM IINN GG Interface GPIB and RS-232, IEEE-488.2 and SCPI comp atible GPIB Function Codes SH 1, AH 1, T6, L4, SR1, RL1, PP0, DC1,DT1, C0, E2 GG EE NN EE RRAA LL Mem ory N on-volatile, stores up to 99 complete panel settings. Last user setup also retained at power down. Power Requirements 100- 240 V , ± 10%, 48-66 Hz, 5 0 VA maximum Dim ensions WxHxD 8.4 x 11.8 x 3.5 inches (213 x 300 x 88 mm) N et Weight 6.61 lbs (3 kg) EMC Conforms to EN5 501 1 class B for radiated and conducted em issions Safety Specifications Conforms to EN61 010, CE Ap proved Op erating T emp erature 32 °F to 122 ° F (0 °C to 50 °C) Storage T emp erature -4 ° F to 140 °F (-20 °C to 60 °C) Hum idity 90% RH at 32 °F to 86 °F (0 °C to 30 °C) Three Year War ranty Included accessories : AC Power cord, CD containing instruction manual, RS-232 cable, test report and certificate of calibration Specifications