400U

400U VISHAY

Document overview

• Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
• PDF pages: 6

Technical content

Document Number: 93510 For technical ques tions, contact: ind-modules@vishay.com www.vishay.com Revision: 23-Jun-08 1 Standard Recovery Diodes (Stud Version), 400 A 400U(R) Series Vishay High Power Products

FEATURES

• Wide current range  High surge current capabilities  Stud cathode and stud anode version  Standard JEDEC types  RoHS compliant  Designed and qualified for industrial level TYPICAL APPLICATIONS  Converters  Power supplies  Machine tool controls  High power drives ELECTRICAL SPECIFICATIONS PRODUCT SUMMARY IF(AV) 400 A DO-205AB (DO-9) RoHS COMPLIANT MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS VALUES UNITS IF(AV) 400 A TC 120 °C IF(RMS) 630 A IFSM

50 Hz 8250

A

60 Hz 8640

50 Hz 340

60 Hz 311

TJ - 40 to 200 °C VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM MAXIMUM AT TJ = TJ MAXIMUM mA 400U(R) 80 800 900 15120 1200 1300 160 1600 1700

www.vishay.com For technical questi ons, contact: ind-modules@vishay.com Document Number: 93510

2 Revision: 23-Jun-08

400U(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 400 A Note  The table above shows the increment of thermal resistance R thJC when devices operate at different conduction angles than DC FORWARD CONDUCTION PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current at case temperature IF(AV) 180° conduction, half sine wave 400 A 120 °C Maximum RMS forward current I F(RMS) DC at 110 °C case temperature 630 A Maximum peak, one cycle forward, non-repetitive surge current IFSM t = 10 ms No voltage reapplied Sinusoidal half wave, initial TJ = TJ maximum 8250 A t = 8.3 ms 8640 t = 10 ms 100 % VRRM reapplied 6940 t = 8.3 ms 7270 Maximum I2t for fusing I 2t t = 10 ms No voltage reapplied 340 kA2s t = 8.3 ms 311 t = 10 ms 100 % VRRM reapplied 241 t = 8.3 ms 220 Maximum I2√t for fusing I 2√t t = 0.1 to 10 ms, no voltage reapplied 3400 kA 2√s Low level value of threshold voltage V F(TO)1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.77 V High level value of threshold voltage V F(TO)2 (I > π x IF(AV)), TJ = TJ maximum 0.85 Low level value of forward slope resistance rf1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.49 mΩ High level value of forward slope resistance rf2 (I > π x IF(AV)), TJ = TJ maximum 0.49 Maximum forward voltage drop V FM Ipk = 1500 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave 1.62 V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum junction operating and storage temperature range TJ, TStg - 40 to 200 °C Maximum thermal resistance, junction to case RthJC DC operation 0.15 K/W Maximum thermal resistance, case to heatsink RthCS Mounting surface, smooth, flat and greased 0.04 Maximum allowed mounting torque ± 10 % Not lubricated threads 27 N · m Approximate weight 250 g Case style See dimensions - link at the end of datasheet DO-205AB (DO-9) ΔRthJC CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS 180° 0.020 0.013 TJ = TJ maximum K/W 120° 0.023 0.023 90° 0.029 0.031 60° 0.042 0.044 30° 0.073 0.074

Document Number: 93510 For technical ques tions, contact: ind-modules@vishay.com www.vishay.com Revision: 23-Jun-08 3 400U(R) Series Standard Recovery Diodes (Stud Version), 400 A Vishay High Power Products Fig. 1 - Current Ratings Characteristics F ig. 2 - Current Ratings Characteristics Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics Average Forward Current (A) Maximum Allowable Case Temperature (°C) 100 110 120 130 140 150 160 170 180 190 200 0 50 100 150 200 250 300 350 400 450 30° 60° 90° 120° 180° Conduction Angle 400U/R Average Forward Current (A) Maximum Allowable Case Temperature (°C) 110 120 130 140 150 160 170 180 190 200 0 100 200 300 400 500 DC 30° 60° 90° 120° 180° Conduction Period 400U/R 10 30 50 70 90 110 130 150 170 190 0.2 K/ W 0.3 K/ W 0.4 K/ W 0.6 K/ W

1 K/W

0.1 K/ W

1.8 K/W

RthSA = 0.04 K/ W - De lta R 100 150 200 250 300 350 400 450 500 550 50 100 150 200 250 300 350 400 450 180° 120° 90° 60° 30° RMS Limit Conduction Angle 400U/R Average Forward Current (A) Maximum Average Forward Power Loss (W) Maximum Allowable Ambient Temperature (°C) 100 200 300 400 500 600 700 800 DC 180° 120° 90° 60° 30° RMS Limit Conduction Period 400U/R 10 30 50 70 90 110 130 150 170 190 0.2 K/ W 0.3 K/ W

0.4 K/W

0.6 K/ W 0.1 K/ W RthSA = 0.04 K/ W - Delta R Average Forward Current (A) Maximum Average Forward Power Loss (W) Maximum Allowable Ambient Temperature (°C) 50 150 250 350 450 550 650

www.vishay.com For technical questi ons, contact: ind-modules@vishay.com Document Number: 93510

4 Revision: 23-Jun-08

400U(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 400 A Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Fig. 7 - Forward Voltage Drop Characteristics Fig. 8 - Thermal Impedance ZthJC Characteristic 2000 3000 4000 5000 6000 7000 8000 11 0 1 0 0 400U/R At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 190°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Peak Half Sine Wave Forward Current (A) Number Of Equal Amplitude Half Cycle Current Pulses (N) 1000 2000 3000 4000 5000 6000 7000 8000 9000 0.01 0.1 1 Versus Pulse Train Duration. Maximum Non Repetitive Surge Current 400U/R Initial Tj = 190°C No Voltage Reapplied Rated Vrrm Reapplied Peak Half Sine Wave Forward Current (A) Pulse Train Duration (s) 100 1000 10000 0 . 511 . 522 . 5 400U/R Tj = 25°C Tj = 190°C Instantaneous Forward Voltage (V) Instantaneous Forward Current (A) 0.001 0.01 0.1 0.001 0.01 0.1 1 10 400U/R Steady State Value: RthJC = 0.15 K/W (DC Operation) Square Wave Pulse Duration (s) Transient Thermal Impedance Z thJC (K/W)

Document Number: 93510 For technical ques tions, contact: ind-modules@vishay.com www.vishay.com Revision: 23-Jun-08 5 400U(R) Series Standard Recovery Diodes (Stud Version), 400 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 513 24 40 0 U R 160 D 1 - 40 = Essential part number 2 - 0 = Standard recovery device 3 - U = Stud normal polarity (cathode to stud) 5 - Voltage code x 10 = V RRM (see Voltage Ratings table) 6 - Diffused diode Note: For metric device M16 x 1.5 contact factory - None = Stud normal polarity (cathode to stud) R = Stud reverse polarity (anode to stud) LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95339

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.