4009W4PAM61A10X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 1

Technical content

( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD 4009W4PAM61A10X CONEC ABC dim. in mm RR RR date drawn Inventor 10 THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A799 D-SUB COMBINATION MALE see notes Schmidt23.02.11

23.02.11 Fischer

for installation into water resistant hood 2:1 (5:1) 4009W4PAM61A10X a Origin 38,86-0,02 0,23+ 47,04\ 0,13 53,09-0,43 0,33+ 12,6 -0,43 0,33 Pos. 1 Pos. 3 Pos. A1 3,1\ 0,1n 1,4 0,2 see note 6 1,12n (5x) -0,31 0,9 9,46 -0,26 0,34 16,63 -0,38 0,12 8,26-0,03 0,22+ SEALING COMPOUND RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 1,8n (4x) 10° Solder Instruction 1. Cable should be prepared for soldering. The cable/wires must be pretinned. 2. Insert cable/wire into solder cup. 3. Signal Contact 3.1. Operate the soldering iron at 350° C, 50 Watt max. and use a pencil tip. 3.2. Put tip to wire in solder cup. 3.3. After 1 second bring in solder. 3.4. Heat for 3 seconds longer. Do not heat contact more than 4 seconds in total. 4. Power Contact 4.1. Operate the soldering iron at 350° C, 100 Watt max. and use a pencil tip. 4.2. Put tip to wire in solder cup. 4.3. After 1 second bring in solder. 4.4. Heat for 5 seconds longer. Do not heat contact more than 6 seconds in total. 5. Remove soldering iron. 6. Wait until solder gets rigid again. 7. Do not solder adjacent contacts consecutively, alternate position within the connector to minimize heat build up. NOTES: 1. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 2. INSULATORS: PBT GF UL 94 V-0; GREEN 3. SIGNAL CONTACTS: COPPER ALLOY; PLATING: GOLD F LASH over NICKEL SOLDER CUP ACCEPTS CABLE AWG 20 4. HIGH POWER CONTACTS 10A: COPPER ALLOY PLATING MATING AREA: GOLD FLASH over NICKEL PLATING TERMINATION SIDE: GOLD FLASH over NICKEL SOLDER CUP ACCEPTS CABLE AWG 16 - 20 5. RUBBER GASKET: TPE; BLACK 6. CONNECTOR IS PART MARKED: 4009W4PAM61A10X CON EC ABC Directive 2002/95/EC RoHS compliant