4003547 CLARKE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 8

Technical content

ORIGINAL INSTRUCTIONS GC01/25 UNDERBONNET RECHARGEABLE WORKLIGHT MODEL NO: UBL5000R PART NO: 4003547

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com INTRODUCTION Thank you for purchasing this CLARKE worklight. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. SPECIFICATIONS GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. Model UBL5000R Operating voltages 5v (input) 7V (light), 230V (charger) LED Wattage consumption 33W LED replaceable No Rechargable Lithium battery 7.4V / 5000mAh Lighting source LED rechargable SMD Light output (luminous flux) 5000 Lumens max Colour temperature (rendering) 6000-7000K Ingress Protection (IP rating) IP20 Insulation Class III on light / II on charger Battery charging time approx 5 hours Approximate Run Time Power 1 Lamp 15 Hours (1000 lumen) Power 2 Lamps 6 hours (2500 lumen) Power 3 Lamps 3 hours (5000 lumen) Rated lamp lifetime 50,000 hours Efficiency 151.5 Lm/W Operating temperatures -10 to + 50oC Dimensions (D x L x H) 50 x 1160 x 98mm Expandable length 1160-1720mm (46.5 - 67.7 in) Weight 1.45 Kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com SAFETY INSTRUCTIONS 1. ALWAYS check for damage before using the worklight. Inspect the charging cable and plug for damage. Any damage should be properly repaired or the part replaced. Consult your local CLARKE dealer. 2. ALWAYS ensure that the voltage marked on the charger matches the power supply to be used. 3. NEVER pull the cable to remove the charger plug from the power supply. 4. NEVER use this light in a bathroom or in the vicinity of a swimming pool. 5. NEVER cover the lamp. 6. DO NOT look directly into the worklight when it is switched on. 7. Keep the worklight out of the reach of children. 8. Charge the worklight in a dry location. DO NOT immerse in water. 9. ALWAYS fully charge before first use. DO NOT turn on the light when charging. 10.DO NOT leave the worklight on charge for more than 24 hours. 11.DO NOT disassemble the worklight as there are no user changeable parts. 12. This worklight utilities a rechargeable Lithium-ion battery that can rupture, ignite and cause serious injury if being used improperly. DO NOT puncture or damage the batteries or dispose of them in a fire. ENVIRONMENTAL RECYCLING POLICY Through purchase of this worklight, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE. In effect, this means that this worklight must not be disposed of with general household waste. It must be disposed of according to the laws governing Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal facility. The light source contained in this worklight has a life expectancy of approximately 50000 hours after which the worklight should be disposed of in an environmentally responsible way. The Lithium Ion battery falls under the Waste Batteries and Accumulators Regulations 2009 and should be disposed of in a controlled manner.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com PREPARATION AND USE CHARGING The lamp is supplied with a charging lead and mains adapter. Connect the micro USB end of the charging cable to the micro USB port. Insert the USB end of the cable into the USB port on the wall charger Plug the AC charger into a live AC outlet.The blue LEDs will light to indicate battery status. Charging will take 5-6 hours. When the battery is fully charged all four LEDs will be lit. The worklight is now ready for use. Fully charge the battery before the first use.

  • Charge the battery every 3 months if the work-light is not in regular use to ensure the longevity of the battery. OPERATION SWITCHING ON AND OFF To switch the light on press the button at the side of the unit.
  • Press the button once to switch on high light state.
  • Press the button twice to switch on medium light state.
  • Press the button three times to switch on low light state.
  • Press the button four times to switch off the light. MOUNTING TO A CAR BONNET To mount to an open car bonnet, extend the telescopic section until the brackets can be used to clamp the work-lamp across the bonnet. With the unit in position the lamp section can be rotated between the brackets to be aimed where the light beam is required.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com Take extra care that the brackets do not slide down if the bonnet is wet. Note that the mounting hooks will not grip if the bonnet is raised over 45 degrees. Extend the lamp against the tension of the internal spring to suit the location. The minimum size bonnet width is 1.16m meaning that the worklamp will not fit across small cars such as the Citroen C1,Toyota Yaris etc but can be used if fitted diagonally. MAINTENANCE 1. Before cleaning the LED work light, disconnect the USB cable (if being charged) and allow the work light to cool down if hot. 2. Clean with a dry or slightly moist, clean, lint free cloth and a mild detergent if required. 3. DO NOT use cleaners that contain abrasives or solvents. 4. Check the LED work light for damage before each use. If the lens is damaged the worklamp must be replaced. 5. Clean any dirt from the housing or lens in case it could cause overheating. THE FOLLOWING SYMBOLS ARE FOUND ON THE PRODUCT Indoor use Harmful to aquatic life Not suitable for use by children Read the instructions

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com COMPONENT PARTS

1 Shaft end cover 11 Silicone button cap 21 Self tapping screw

2 Aluminium lamp base 12 Reflective film 22 Self tapping screw

3 PC lens 13 LED plate 23 Self tapping screw

4 Base end cover 14 Spring 24 Self tapping screw

5 PCBA holder 15 Spring sleeve 25 M5 locknut

6 Spring clamp 16 Insert end cover 1 26 M5 screw

7 Hook holder 17 Insert end cover 2 27 Nylon gasket

8 Hook end cover 18 Aluminium part 28 Battery

9 Metal bracket 19 Spring fixing plate 29 PCBA

10 Rubber hook cover 20 USB cover

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com DECLARATIONS OF CONFORMITY