3R-8-SSS YAGEO

Document overview

  • PDF pages: 6

Technical content

Page 1

PDF page 1 diagram
PDF page 1 diagram

Page 2

PDF page 2 diagram

Gas Discharge Tube (GDT) Data Sheet

Features

■ Provide ultra-fast response to surge voltage from slow-rising surge of 100V/s to rapid-rising surge of 1KV/μs ■ Stable breakdown voltage ■ High insulation resistance ■ Low capacitance (≤2pF) ■ High holdover voltage ■ Large absorbing transient current capability ■ Micro-Gap Design ■ Size: 8.0mm\*10.0mm ■ Storage and operating temperature: -40℃ ~ +85℃ ■ Meets MSL level 1, per J-STD-020 ■ Safety certification: UL

Applications

■ Repeaters, Modems ■ Telephone Interface, Line cards ■ Data communication equipment ■ Line test equipment

Part Number Code

PDF page 2 diagram

Electrode Numbers 3R: 3 Electrodes

Dimensions

PDF page 2 diagram
PDF page 2 diagram

SSS

Internal Control Code

Dimensions 8: 8.0mm×10.0mm

M Type Symbol Dimension (mm)
Spec. Tolerance
D 8.0 +0.2, -0.8
D1 7.9 ±0.2
T 10.0 ±0.5
B 0.5 ±0.1
B1 1.5 ±0.2

Electrical Characteristics

Page 3

PDF page 3 diagram
Part Number Type ① DC Spark-over Voltage Maximum Impulse Spark-over Voltage Nominal Impulse Discharge Current Alternating Discharge Current Impulse Life Minimum Insulation Resistance Maximum Capacitan ce Device Marking Code
100V/s 1000V/μs 8/20μs 10times 50Hz,1sec 10/1000μs 100A Test Voltage (GΩ) 1MHz
(V) (V) (KA) (A) (times) DC(V) (pF)
3RM075M-8 SSS 75±20% 700 10 10 300 25 1.0 2.0 None
3RM090M-8 SSS 90±20% 700 10 10 300 50 1.0 2.0 None
3RM150M-8 SSS 150±20% 700 10 10 300 100 1.0 2.0 None
3RM200M-8 SSS 200±20% 700 10 10 300 100 1.0 2.0 None
3RM230M-8 SSS 230±20% 800 10 10 300 100 1.0 2.0 None
3RM350M-8 SSS 350±20% 900 10 10 300 100 1.0 2.0 None
3RM400M-8 SSS 400±20% 1000 10 10 300 100 1.0 2.0 None
3RM470M-8 SSS 470±20% 1100 10 10 300 250 1.0 2.0 None
3RM600M-8 SSS 600±20% 1300 10 10 300 250 1.0 2.0 None
3RP075M-8 SSS 75±20% 700 20 20 300 25 1.0 2.0 None
3RP090M-8 SSS 90±20% 700 20 20 300 50 1.0 2.0 None
3RP150M-8 SSS 150±20% 700 20 20 300 100 1.0 2.0 None
3RP200M-8 SSS 200±20% 700 20 20 300 100 1.0 2.0 None
3RP230M-8 SSS 230±20% 800 20 20 300 100 1.0 2.0 None
3RP350M-8 SSS 350±20% 900 20 20 300 100 1.0 2.0 None
3RP400M-8 SSS 400±20% 1000 20 20 300 100 1.0 2.0 None
3RP470M-8 SSS 470±20% 1100 20 20 300 250 1.0 2.0 None
3RP600M-8 SSS 600±20% 1300 20 20 300 250 1.0 2.0 None

Notes:① Specific code by request.

Electrical Ratings

Items Test Condition/Description Requirement
DC Spark-over Voltage The voltage is measured with voltage ramp dv/dt=100V/s. Test is between each side electrode and center electrode. To meet the specified value
Maximum Impulse Spark-over Voltage The maximum impulse spark-over voltage is measured with voltage ramp dv/dt=1000V/μs. Test is between each side electrode and center electrode.

Page 4

PDF page 4 diagram
Impulse Discharge Current Maximum surge current that can be applied through center electrode with 8/20μs waveform, for 10 times with 3min interval time, which will be equally divided between each side electrode to center electrode.
Alternating Discharge Current Rated RMS value of AC current at 50Hz, 1 sec. for 10 times with interval time 3 min. Test is between each side electrode and center electrode.
Insulation Resistance The resistance of gas tube shall be measured between each side electrodes and center electrode.
Capacitance The capacitance of gas tube shall be measured between each side electrodes and center electrode.Test frequency: 1MHz

Recommended Soldering Conditions

PDF page 4 diagram

Page 5

PDF page 5 diagram

Recommended Conditions

PDF page 5 diagram
PDF page 5 diagram
Profile Feature Pb-Free Assembly
Average ramp-up rate (T to T P) L 3℃/second max.
Preheat -Temperature Min (T ) S min -Temperature Max (T ) S max -Time (min to max) (ts) 150℃ 200℃ 60-180 seconds
T to T S max L -Ramp-up Rate 3℃/second max.
Time maintained above: -Temperature (T ) L -Time (t ) L 217℃ 60-150 seconds
Peak Temperature (T ) P 260℃
Time within 5℃of actual Peak Temperature (t ) P 20-40 seconds
Ramp-down Rate 6℃/second max.
Time 25℃to Peak Temperature 8 minutes max.

Packaging SMD Packing (Tape & Reel)

Tape Symbol Dimension (mm)
Spec. Tolerance
W 16.00 ±0.20
P0 4.00 ±0.10
P 16.00 ±0.10
P2 2.00 ±0.10
D0 1.55 ±0.10
E 1.75 ±0.10
F 7.50 ±0.10
A0 10.30 ±0.10
K0 8.40 ±0.10
B0 8.40 ±0.10
T 0.50 ±0.05
Reel D 330.00 ±2.00
d 13.00 ±0.50
L 20.00 ±2.00
t 2.00 ±0.20
Quantity: 300pcs

Page 6

Product specification

Circuit Protection Components

LEGAL DISCLAIMER

YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notice.

YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum exten t permitted by law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability.

YAGEO products are designed for general purpose applications under normal operation and usage conditions. Please contact YAGEO for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace equipment (artificial satellite, rocket, etc.), Atomic energy-related equipment, Aviation equipment, Disaster prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly public information network equipment, data-processing equipment , Medical devices, Military equipment, Power generation control equipment, Safety equipment, Traffic signal equipment, Transportation equipment and

Undersea equipment, or for any other application or use in which the failure of YAGEO products could result in personal injury or death, or serious property damage. Particularly YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight.

Information provided here is intended to indicate product specifications only. YAGEO reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN.

www.yageo.com