3R075SA-5 LEIDITECH

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Applications

  • 5*7.6mm devices
  • Broad voltage range from 75V-600V
  • Various form factors: surface mount, axial leads, no leads
  • Low capacitance and insertion loss
  • RoHS compliant
  • Devices tested per ITU K.12 recommendations
  • Non-radioactive materials ROHS All data is subject to change,Please check our data sheets at www.leiditech.com for updates.

Electriacl Characteristics GDT 02 Type number DC Spark- over voltage Maimum Impulse spark- over voltage Impuise life 10/1000us,100A Minimum Insulation resistance Maximum Capacitance Maximum surge DischargeCurrent @8/20us,10times Altermationg Dischare Curiren V @100v/s V @1kv/us Times Test Voltage GΩ pF @1MHz KA A @50Hz 1S 3R075SA-5 75±20% 700 300 times DC 25V 2.0 pF 5KA 5A3R090SA-5 90±20% 600 DC 50V 3R150SA-5 150±20% 600 DC 100V 3R230SB-5 230±20% 650 10KA 10A 3R300SB-5 300±20% 650 3R350SB-5 350±20% 800 3R400SB-5 400±20% 900 3R420SB-5 420±20% 900 DC 250V >13R470SB-5 470±20% 900 3R600SB-5 600±20% 1000 Notes: 1.Insulation resistance measure at: DC 50V for the 3R075,3R090,and 3R150 DC 200V for other. 2. Terms in accordance with ITU-T K.12 and GB/T 9043-2008 3. At delivery AQL 0.65 level 2 DIN ISO 2859 unit:mm Product Dimensions All data is subject to change,Please check our data sheets at www.leiditech.com for updates.

Pb – Free assembly Pre Heat - Temperature Min (T s(min) )1 50°C - Temperature Max (T s(max) )2 00°C - Time (Min to Max) (t s )6 0 – 180 secs Average ramp up rate (Liquidus Temp L ) to peak 3°C/second max T S(max) to T L - Ramp-up Rate 5°C/second max - Temperature (T L ) (Liquidus) 217°C - Temperature (t L )6 0 – 150 seconds Peak Temperature (T P )2 60 +0/-5 Time within 5°C of actual peak Temperature (t p ) 10 – 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (T P )8 minutes Max. Do not exceed 260°C Time erutarep meT T P T L T S(max) T S(min) t P t L t S time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone T L to T P Soldering Parameters - Wave Soldering (Thru-Hole Devices) Soldering Parameters - Hand Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave ParameterL ead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100 C Temperature Maximum: 150 C Preheat Time: 60-180 seconds Solder Pot Temperature: 280 C Maximum Solder Dwell Time: 2-5 seconds Recommended Process Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. All data is subject to change,Please check our data sheets at www.leiditech.com for updates.

3 R 3 5 0 T B - 5

T=Thrust S=SMD Dimensions Electrical Characteristics A=5000A B=10000A All data is subject to change,Please check our data sheets at www.leiditech.com for updates. Leiditech Electronics are trademarks. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Leiditech Electronics reserves the right to change or update, without notice, any information contained in this publication; to change, without notice, the design, construction, processing, or specification of any product; and to discontinue or limit production or distribution of any product. This publication supersedes and replaces all information previously supplied. Without expressed or written consent by an officer of Leiditech Electronics, Leiditech Electronics does not authorize the use of any of its products as components in nuclear facility applications, aerospace, or in critical life support devices or systems. Leiditech Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. Leiditech Electronics’ only obligations are those in the Leiditech Electronics Standard Terms and Conditions of Sale and in no case will Leiditech Electronics be liable for any incidental, indirect, or consequential damages. SHANGHAI LEIDITECH ELECTRONICS CO.,LTD Tel: +86- 021 50828806 Fax: +86- 021 50477059-8008 Email: sale1@leiditech.com Website: http://www.leiditech.com