Download PDF3N201 DIGITRON
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 6
Technical content
144 Market Street
phone +1.908.245-7200 3N201-3N203 DUAL GATE MOSFET VHF AMPLIFIER MAXIMUM RATINGS Rating Symbol Value Unit Drain-source voltage VDS 25 Vdc VDG1 Drain-gate voltage VDG2
30 Vdc
±10 mAdc Total device dissipation @ TA = 25°C Derate above 25°C PD 360 2.4 mW mW/°C Total device dissipation @ TC = 25°C Derate above 25°C PD 1.2 8.0 W mW/°C Lead temperature TL 300 °C Junction temperature range TJ -65 to 175 °C Storage temperature range Tstg -65 to 175 °C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Drain-source breakdown voltage (ID = 10µAdc, VS = 0, VG1S = VG2S = -5.0Vdc) V(BR)DSX - Vdc Gate 1-source breakdown voltage (1) (IG1 = ±10mAdc, VG2S = VDS = 0) V(BR)G1SO ±6.0 ±12 ±30 Vdc Gate 2-source breakdown voltage (1) (IG2 = ±10mAdc, VG1S = VDS = 0) V(BR)G2SO ±6.0 ±12 ±30 Vdc Gate 1 leakage current (VG1S = ±5.0Vdc, VG2S = VDS = 0) (VG1S = -5.0Vdc, VG2S = VDS = 0, TA = 150°C) IG1SS ±0.040 ±10 -10 nAdc µAdc Gate 2 leakage current G2S = ±5.0Vdc, VG1S = VDS = 0) (VG2S = -5.0Vdc, VG1S = VDS = 0, TA = 150°C) IG2SS ±0.050 ±10 -10 nAdc µAdc Gate 1 to source cutoff voltage (VDS = 15Vdc, VG2S = 4.0Vdc, ID = 20µAdc) VG1S(off) -0.5 -1.5 -5.0 Vdc Gate 2 to source cutoff voltage (VDS = 15Vdc, VG1S = 0, ID = 20µAdc) VG2S(off) -0.2 -1.4 -5.0 Vdc ON CHARACTERISTICS Zero-gate voltage drain current (2) (VDS = 15Vdc, VG1S = 0, VG2S = 4.0Vdc) 3N201, 3N202 3N203 IDSS 6.0 3.0 mAdc SMALL SIGNAL CHARACTERISTICS Forward transfer admittance(3) (VDS = 15Vdc, VG2S = 4.0Vdc, VG1S = 0, f = 1.0kHz) 3N201, 3N202 3N203 |Yfs| 8.0 7.0 12.8 12.5 mmhos Input capacitance DS = 15Vdc, VG2S = 4.0Vdc, ID = IDSS, f = 1.0MHz) Ciss 3.3 - pF Reverse transfer capacitance (VDS = 15Vdc, VG2S = 4.0Vdc, ID = 10mAdc, f = 1.0MHz) Crss 0.005 0.014 0.03 pF Output capacitance DS = 15Vdc, VG2S = 4.0Vdc, ID = IDSS, f = 1.0MHz) Coss 1.7 - pF sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20120705
phone +1.908.245-7200 3N201-3N203 DUAL GATE MOSFET VHF AMPLIFIER ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit FUNCTIONAL CHARACTERISTICS Noise figure (VDD = 18Vdc, VGG = 7.0Vdc, f = 200MHz) (VDD = 18Vdc, VGG = 6.0Vdc, f = 45MHz) 3N201 3N203 NF 1.8 5.3 4.5 6.0 dB Common source power gain DD = 18Vdc, VGG = 7.0Vdc, f = 200MHz) (VDD = 18Vdc, VGG = 6.0Vdc, f = 45MHz) (VDD = 18Vdc, fLO = 245MHz, fRF = 200MHz) 3N201 3N203 3N202 G ps Gc(5) dB Bandwidth DD = 18Vdc, VGG = 7.0Vdc, f = 200MHz) (VDD = 18Vdc, fLO = 245MHz, fRF = 200MHz) (VDD = 18Vdc, VGG = 6.0Vdc, f = 45MHz) 3N201 3N202 3N203 B W 5.0 4.5 3.0 9.0 7.5 6.0 MHz Gain control gate-supply voltage (4) (VDD = 18Vdc, ΔGps = -30dB, f = 200MHz) (VDD = 18Vdc, ΔGps = -30dB, f = 45MHz) 3N201 3N203 V GG(GC) -1.0 -0.6 -3.0 -3.0 Vdc Note 1: All gate breakdown voltages are measured while the device is conducting rated gate current. This ensures that the gate-voltage limiting network is functioning properly. Note 2: Pulse test: pulse width = 300µs. Duty cycle ≤ 2.0%. Note 3: This parameter must be measured with bias voltages applied for less than 5 seconds to avoid overheating. Note 4: ΔGps is defined as the change from the value at VGG = 7.0V and VGG = 6.0V. Note 5: Power gain conversion. sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20120705
phone +1.908.245-7200 3N201-3N203 DUAL GATE MOSFET VHF AMPLIFIER sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20120705
phone +1.908.245-7200 3N201-3N203 DUAL GATE MOSFET VHF AMPLIFIER sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20120705
phone +1.908.245-7200 3N201-3N203 DUAL GATE MOSFET VHF AMPLIFIER sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20120705
phone +1.908.245-7200 3N201-3N203 DUAL GATE MOSFET VHF AMPLIFIER Inches Millimeters Dim Min Max Min Max A - 0.230 - 5.840 B - 0.195 - 4.950 C - 0.210 - 5.330 D - 0.021 - 0.530 E - 0.030 - 0.760 F - 0.019 - 0.480 G 0.100 BSC 2.540 BSC H - 0.046 - 1.170 J - 0.0480 - 1.220 K 0.500 - 12.700 - L 0.250 - 6.350 - M 45°C BSC 45°C BSC N 0.050 BSC 1.270 BSC P - 0.050 - 1.270 T O - 7 2 Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20120705