380L563M025A072

380LX ETC2

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

Temperature Range –40 °C to +85 °C ≤ 250 Vdc –25 °C to +85 °C ≥ 315 Vdc Rated Voltage Range 16 Vdc to 500 Vdc Capacitance Range 33 µF to 270,000 µF Capacitance Tolerance ± 20% Leakage Current ≤3√CV µA at 5 min Ripple Current Multipliers Low Temperature Characteristics Impedance ratio: Z–20⁰C ∕ Z+25⁰C ≤ 8 (16–50 Vdc) ≤ 4 (63–100 Vdc) ≤ 3 (150–500 Vdc) Endurance Life Test 3,000 h @ full load at +85 °C ∆ Capacitance ±20% ESR 200% of limit DCL 100% of limit Shelf Life Test 1,000 h @ 85 °C ∆ Capacitance ±20% ESR 200% of limit DCL 100% of limit Vibration 10 to 55 Hz, 0.06” and 10 g max, 2 h in each plane RoHS Compliant The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches the ripple capability of our Type 520C computer-grade capacitor. Type 380LX delivers more capacitance per can size while Type 380L available in the largest case sizes gives lower ESR for the same capacitance. Types 382L and 382LX give the choice of 4 or 5 leads for stable, reverse proof mounting. Highlights - Latest available ratings, worldwide - Top performance in power supplies and motor drives - Big selection of 46 case sizes - 2, 4 and 5 leads available Specifications Frequency 45 ºC 60 ºC 70 ºC 85 ºC 1.5 1.4 1.3 1.0

50 Hz 60 Hz 120 Hz 500 kHz 1 kHz

kHz & Up Ambient Temperature Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

382LX 272 M 200 N05 2 V +D Case Blank = no end disk if <250 V Type Cap Tolerance Voltage Code Insulation # of pins D = end disk, any voltage 380L / LX (2 pins) 272 = 2700 µF M = ±20% 200 = 200 Vdc 2 = PVC Blank = 2 pins / 4 pins snap-in 6.3mm L 382L / LX (4 or 5 pins) 333 = 33000 µF A = 2 pins / 4 pins snap-in 4.0mm L VS = 5 pins snap-in 6.3mm L V = 5 pins standoff Outline Drawings Connection Terminal 40 mm Dia. 50 mm Dia. A dummy negative (–) B dummy dummy C positive (+) positive (+) D dummy positive (+) – negative (–) negative (–) Notes: * Use dummy terminals for mechanical support only. Make no electrical connection because they resistively connect through the electrolyte to the negative terminal. ** Safety Vent may be on the bottom or on the side of the can. Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Part Numbering System Two Pins 380L/LX (22 through 40 mm diameter) Four Pins 382L/LX (35 and 40mm diameter) Five Pins 382L/LX (40 and 50mm diameter) Available in 5 pins Available in 2 and 4 pins 4.0 6.3 1 1.5 0.2 2.0max. 6.3 mm pin length Top of Capacitor Body 0.8 +0.2 -0.1 Available in 2, 4 and 5 pins Top of Capacitor Body 1.5 0.1 0.6 min. 0.7 3.75 0.1 5 pin Standoff pin style (add “V” to end of part#) 4.0 1.5 0.2 2.0max. 4.0 mm pin length option (add “A” to end of part#) Top of Capacitor Body 0.8 +0.2 -0.1 3.5 Available in 2 and 4 pins Note that for 200 volts and under the insulating end disc is optional - If one is needed add a (+D) to the end of the part numbering system. 6.3 pin length 4.0 pin length Dimensions shown are in mm L ± 2 max. L ± 2 max.

Typical Performance Curves Case Code DIAMETER "D" LENGTH " L" Typical Weight Case Code DIAMETER "D" LENGTH " L" Typical Weight mm inches mm inches (grams) mm inches mm inches (grams) H20 22 0.87 20 0.79 14 A20 35 1.38 20 0.79 35 H01 22 0.87 25 0.98 16 A01 35 1.38 25 0.98 42 H02 22 0.87 30 1.18 19 A02 35 1.38 30 1.18 48 H03 22 0.87 35 1.38 22 A03 35 1.38 35 1.38 54 H04 22 0.87 40 1.57 24 A04 35 1.38 40 1.57 62 H45 22 0.87 45 1.77 28 A45 35 1.38 45 1.77 67 H05 22 0.87 50 1.97 31 A05 35 1.38 50 1.97 74 J20 25 0.98 20 0.79 16 A55 35 1.38 55 2.17 80 J01 25 0.98 25 0.98 20 A06 35 1.38 63 2.48 88 J02 25 0.98 30 1.18 24 A07 35 1.38 70 2.76 98 J03 25 0.98 35 1.38 27 A08 35 1.38 80 3.15 112 J04 25 0.98 40 1.57 31 A10 35 1.38 105 4.13 144 J45 25 0.98 45 1.77 35 N04 40 1.57 40 1.57 82 J05 25 0.98 50 1.97 38 N05 40 1.57 50 1.97 105 K20 30 1.18 20 0.79 25 N06 40 1.57 63 2.48 130 K01 30 1.18 25 0.98 30 N08 40 1.57 80 3.15 185 K02 30 1.18 30 1.18 35 N10 40 1.57 105 4.13 265 K03 30 1.18 35 1.38 40 B05 50 1.97 50 1.97 136 K04 30 1.18 40 1.57 44 B06 50 1.97 63 2.48 168 K45 30 1.18 45 1.77 48 B08 50 1.97 80 3.15 239 K05 30 1.18 50 1.97 53 B09 50 1.97 92 3.62 241 B10 50 1.97 105 4.13 325 Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 100 1000 Expected Operating Life, kh Rated Ripple-Current Multiple Type 380L/LX Operating Life in Kilohours vs Ripple Current 45 ºC 55 ºC 65 ºC 75 ºC 85 ºC

Capacitance, DF , Leakage Current Hours @ Rated Max Temp, Voltage, Ripple Life Test Data 380L222M050K012 Capacitance, DF , Leakage Current Leakage (uADC) DF (%) Cap Change (%) Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 -10 0 500 1000 1500 2000 Capacitance, DF , Leakage Current Hours @ Rated Max Temp, Voltage, Ripple Life Test Data 380LX222M100J042 Capacitance, DF , Leakage Current Leakage (uADC) DF (%) Cap Change (%) -10 0 500 1000 1500 2000 Capacitance, DF , Leakage Current Hours @ Rated Max Temp, Voltage, Ripple Life Test Data 380LX151M400J02 Capacitance, DF , Leakage Current Leakage (uADC) DF (%) Cap Change (%) 0 500 1000 1500 2000 Capacitance, DF , Leakage Current Hours @ Rated Max Temp, Voltage, Ripple Life Test Data 380LX331M450K052 Capacitance, DF , Leakage Current Leakage (uADC) DF (%) Cap Change (%) Typical Performance Curves

Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Catalog Part Number Catalog Part Number120 Hz 20 kHz 120 Hz 20 kHz (mm) 120 Hz 20 kHz 120 Hz 20 kHz (mm)

16 Vdc (20 Vdc Surge) 25 Vdc (32 Vdc Surge)

Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Catalog Part Number Catalog Part Number

120 Hz 20 kHz 120 Hz 20 kHz (mm) 120 Hz 20 kHz 120 Hz 20 kHz (mm)

25 Vdc (32 Vdc Surge) 35 Vdc (44 Vdc Surge)

35 Vdc (44 Vdc Surge) 82000 382LX823M035N102 0.012 0.009 12.02 13.82 40 x 105 3300 380LX332M035J202 0.120 0.090 1.70 2.00 25 x 20 50 Vdc (63 Vdc Surge) Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Catalog Part Number Catalog Part Number120 Hz 20 kHz 120 Hz 20 kHz (mm) 120 Hz 20 kHz 120 Hz 20 kHz (mm)

50 Vdc (63 Vdc Surge) 63 Vdc (79 Vdc Surge)

63 Vdc (79 Vdc Surge) 47000 382LX473M063B082V 0.013 0.010 12.78 14.70 50 x 80 1500 380LX152M063H012 0.221 0.167 1.70 2.00 22 x 25 80 Vdc (100 Vdc Surge) Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Catalog Part Number Catalog Part Number120 Hz 20 kHz 120 Hz 20 kHz (mm) 120 Hz 20 kHz 120 Hz 20 kHz (mm)

80 Vdc (100 Vdc Surge) 100 Vdc (125 Vdc Surge)

100 Vdc (125 Vdc Surge) 12000 382LX123M100N082 0.028 0.021 8.65 10.00 40 x 80 1000 380LX102M100J012 0.220 0.150 2.00 2.30 25 x 25 160 Vdc (200 Vdc Surge) Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Catalog Part Number Catalog Part Number120 Hz 20 kHz 120 Hz 20 kHz (mm) 120 Hz 20 kHz 120 Hz 20 kHz (mm)

160 Vdc (200 Vdc Surge) 180 Vdc (225 Vdc Surge)

2700 380LX272M160A052 0.090 0.060 5.50 7.60 35 x 50 200 Vdc (250 Vdc Surge) 180 Vdc (225 Vdc Surge) 560 380LX561M200J022 0.330 0.150 2.43 3.40 25 x 30 Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Catalog Part Number Catalog Part Number120 Hz 20 kHz 120 Hz 20 kHz (mm) 120 Hz 20 kHz 120 Hz 20 kHz (mm)

200 Vdc (250 Vdc Surge) 250 Vdc (300 Vdc Surge)

250 Vdc (300 Vdc Surge) 2700 382LX272M250B052V 0.074 0.037 6.77 7.79 50 x 50 270 380LX271M250J012 0.620 0.250 1.30 1.80 25 x 25 315 Vdc (365 Vdc Surge) Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Catalog Part Number Catalog Part Number120 Hz 20 kHz 120 Hz 20 kHz (mm) 120 Hz 20 kHz 120 Hz 20 kHz (mm)

315 Vdc (365 Vdc Surge) 350 Vdc (400 Vdc Surge)

350 Vdc (400 Vdc Surge) 2700 382LX272M350B102V 0.092 0.041 8.80 12.32 50 x 105 82 380LX820M350H012 2.022 0.708 0.83 1.16 22 x 25 400 Vdc (450 Vdc Surge) Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Cap. (µF) Max. ESR Ω@ 25 °C Ripple Amps Max. @ 85 °C Nominal Size D x L Catalog Part Number Catalog Part Number120 Hz 20 kHz 120 Hz 20 kHz (mm) 120 Hz 20 kHz 120 Hz 20 kHz (mm)

400 Vdc (450 Vdc Surge) 420 Vdc (470 Vdc Surge)

390 380LX391M400A032 0.470 0.160 2.10 3.00 35 x 35 450 Vdc (500 Vdc Surge) 420 Vdc (470 Vdc Surge) 180 380LX181M450J042 0.921 0.368 1.35 1.89 25 x 40 Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Max. ESR Ripple Amps Nominal Max. ESR Ripple Amps Nominal Cap. Catalog Part Number Ω@ 25 °C Max. @ 85 °C Size D x L Cap. Catalog Part Number Ω@ 25 °C Max. @ 85 °C Size D x L (µF) 120 Hz 20 kHz 120 Hz 20 kHz (mm) (µF) 120 Hz 20 kHz 120 Hz 20 kHz (mm)

450 Vdc (500 Vdc Surge) 500 Vdc (550 Vdc Surge)

500 Vdc (550 Vdc Surge) 270 382L271M500N042 0.746 0.447 2.40 3.20 40 x 40 150 380LX151M500K042 0.926 0.562 1.60 2.20 30 x 40 Type 380LX / 382LX 85 °C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required.