DATASHEET SEARCH SITE

Document overview

  • PDF pages: 2

Technical content

Page 1

PDF page 1 diagram

Total Resistance Tolerance ..................±5 % ...........................................±10 % Independent Linearity ..........................±0.25 % ......................................±0.25 % Effective Electrical Angle .....................3600 ° +10 °, -0 ° .......................3600 ° +10 °, -2 ° Absolute Minimum Resistance/ ...........1 ohm or 0.1 % maximum ..........Minimum voltage Minimum Voltage

(whichever is greater)

0.2 % maximum

Noise ..................................................100 ohms ENR maximum ..........Output smoothness 0.1 %

maximum

Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level .........................................1,000 VAC minimum ..................1,000 VAC minimum Power Rating (Voltage Limited By Power Dissipation or 315 VAC, Whichever Is Less) +70 °C ..............................................1 watt..........................................1 watt +125 °C ............................................0 watt..........................................0 watt Insulation Resistance (500 VDC) ........1,000 megohms minimum ..........1,000 megohms minimum Resolution............................................See recommended part nos. .....Essentially infi nite

Environmental Characteristics1 Operating Temperature Range ............+1 °C to +125 °C ........................+1 °C to +105 °C Storage Temperature Range ...............-65 °C to +125 °C .......................-55 °C to +105 °C Temperature Coeffi cient Over Storage Temperature Range2 .........±50 ppm/°C maximum/unit .........±100 ppm/°C maximum/unit Vibration ..............................................20 G ...........................................20 G Wiper Bounce ..................................0.1 millisecond maximum ...........0.1 millisecond maximum Shock...................................................100 G .........................................100 G

Wiper Bounce ..................................0.1 millisecond maximum ...........0.1 millisecond maximum Load Life ..............................................1,000 hours, 1 watt.....................1,000 hours, 1 watt Total Resistance Shift ......................±2 % maximum ..........................±5 % maximum Rotational Life (No Load).....................1,000,000 shaft revolutions2 .....4,000,000 shaft revolutions2 Total Resistance Shift ......................±5 % maximum ..........................±5 % maximum Moisture Resistance (MIL-STD-202, Method 103, Condition B) Total Resistance Shift ......................±2 % maximum ..........................±5 % maximum

IP Rating ..............................................IP 40 ...........................................IP 40 Mechanical Characteristics1 Stop Strength..........................................................................................14 N-cm (20 oz-in.) minimum Mechanical Angle ......................................................................................................3600 ° +20 °, -0 ° Torque (Starting & Running) .....................................................................0.45 N-cm (0.6 oz.-in.) max. Mounting ..................................................................................... 170-200 N-cm (15-18 lb.-in.) max.

Shaft Runout.................................................................................................0.05 mm (0.002 in.) T.I.R. Lateral Runout ..............................................................................................0.13 mm (0.005 in.) T.I.R. Shaft End Play ..............................................................................................0.13 mm (0.005 in.) T.I.R. Shaft Radial Play ..........................................................................................0.08 mm (0.003 in.) T.I.R. Pilot Diameter Runout ..................................................................................0.05 mm (0.002 in.) T.I.R.

Backlash ....................................................................................................................... 1.0 ° maximum Weight .................................................................................................................Approximately 28 gm Terminals ............................................Gold-plated solderlugs (3700) or gold-plated turret lugs (3701) Soldering Condition Manual Soldering .................................96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire

370 °C (700 °F) max. for 3 seconds

Wave Soldering ........................................................ 96.5Sn/3.0Ag/0.5Cu solder with no-clean fl ux

260 °C (500 °F) max. for 5 seconds

Wash processes ..................................................................................................Not recommended Marking ................................................. Manufacturer’s name and part number, resistance value and

tolerance, linearity tolerance, wiring diagram, and date code

Ganging (Multiple Section Pots.) .................................................................................1 cup maximum Hardware ................................................... One lockwasher (H-37-1) and one mounting unit (H-38-1)

is shipped with each potentiometer.

1 At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted. 2 Consult manufacturer for complete specifi cation details.

CCW

CW

2 1

3

CW

Recommended Part Numbers

Part Number Resistance (Ω) Resolution (% Max.)
3700S-1-102L 1,000 0.05
3700S-1-202L 2,000 0.04
3700S-1-502L 5,000 0.04
3700S-1-103L 10,000 0.03
Part Number Resistance (Ω)
3701H-1-102L 1,000
3701H-1-202L 2,000
3701H-1-502L 5,000
3701H-1-103L 10,000

BOLDFACE LISTINGS ARE IN STOCK AND READILY AVAILABLE THROUGH DISTRIBUTION. FOR OTHER OPTIONS CONSULT FACTORY. ROHS IDENTIFIER: L = COMPLIANT\*

Asia-Pacifi c: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116

EMEA:

Tel: +36 88 520 390 Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com

REV. 11/13

“Hybritron” is a registered trademark of Bourns, Inc.

\*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.

Specifi cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their specifi c applications.

Page 2

3700/3701 - Precision Potentiometer

Product Dimensions

3700S-1

1/4"-32-UNEF-2ATHD

PDF page 2 diagram
PDF page 2 diagram

ADJUSTMENT SLOT 0.81 WIDE X (.032) 0.81 ± .25 DEEP (.032 ± .010)

LOCKWASHER AND MOUNTING NUT TO BE SUPPLIED WITH EACH UNIT

3701H-1

PDF page 2 diagram
PDF page 2 diagram

(.032)

(.032)

LOCKWASHER AND MOUNTING NUT TO BE SUPPLIED WITH EACH UNIT

TOLERANCES: EXCEPT WHERE NOTED .25 .13 DECIMALS: .XX (.010) .XXX (.005) FRACTIONS: 1/64 MM DIMENSIONS: (IN)

REV. 11/13

Specifi cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their specifi c applications.