CMXH-ST2-C5-7-DIOP FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Controller CMXH-ST2-C5-7-DIOP

Part number: 3605478

PDF page 1 diagram

Data sheet

Feature Value
Type code CMXH
Ambient temperature 0 °C ... 50 °C
Type of mounting On H-rail with accessories With screws in slots
Product weight 700 g
CE marking (see declaration of conformity) As per EU EMC directive as per EU machinery directive
Certification RCM compliance mark
Degree of protection IP20
Storage temperature -25 °C ... 75 °C
Note on materials RoHS-compliant
Relative air humidity 0 - 90 % Non-condensing
Fieldbus coupling 1x CANopen slave
Electrical connection technology I/O Socket, Sub-D, 15-pin
Number of digital logic inputs 8
Number of digital logic outputs 24 V DC 5
Information on digital logic inputs/outputs Digital logic inputs/outputs are only available in I/O mode.
Bus connection Plug 9-pin Sub-D
Controller operating mode Direct operation Block selection
Process interfacing For 31 blocks
Nominal voltage, logic supply DC 24 V
Permissible range of logic voltage ± 15 %
Nominal voltage, load supply DC 48 V
Note on nominal operating voltage of DC load voltage supply Alternatively, 24 V also possible.
Load supply permissible range ± 10 %
Max. current consumption for logic supply without clamping brake 0.2 A
Max. current consumption for logic supply with clamping brake and I/O 0.9 A
Braking resistor 15 Ohm
Note on braking resistor Integrated braking resistor
Line filter Integrated
Nominal current load supply 10 A
Permissible load current 12 A
Current rating per output 100 mA

2/10/21 - Subject to change - Festo AG & Co. KG

1/2

Page 2

Feature Value
Power failure buffering 10 ms
Information on power failure buffering The 10 ms value is not achieved when a brake is integrated.
Status indications 7-segment display LED
Ethernet, number 1
Ethernet, supported protocols TCP/IP, Modbus® TCP
Resistance to vibration EN 60068-2-6
Resistance to shock EN 60068-2-27
Protection class III
Total number of axes 2
Activation methods I/O standalone CAN bus TCP/IP
Communication profile FHPP
Max. fieldbus transmission rate 100 Mbit/s
Information on max. fieldbus transmission rate 1 Mbit/s for CANopen
Supported kinematics systems Planar surface gantry EXCM
Programming software FCT (Festo Configuration Tool)
Dimensions W x L x H 50 mm x 149 mm x 130 mm
Device-specific diagnostics Diagnostic memory Short circuit in motor winding Undervoltage/overvoltage System and motor-oriented diagnostics
Configuration support FCT (Festo Configuration Tool)
Parameterization System parameter
Protocol CANopen FHPP Modbus® TCP
Ethernet interface RJ 45 (socket, 8-pin)
LED display (bus-specific) Device: operating status Com: communication status
LED display (product-specific) POWER: load voltage applied
Safety function Safe torque off (STO)
Performance Level (PL) Safe torque off (STO)/category 3, performance level e
Safety integrity level (SIL) Safe torque off (STO)/SIL 3
Certificate issuing authority 01/205/5519.00/16 German Technical Control Board (TÜV) Rheinland
Proof test interval 20 y
Diagnostic coverage 90 %
SFF safe failure fraction 99 %
Certified for safety functions to ISO 13849 (PL) Product can be used in safety-related parts of control systems up to category 3, PL e
Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in safety-related parts of control systems up to SIL 3, high demand
Probability of Dangerous Failure per Hour (PFHd) 2.0E-9
MTTFd STO/5700 years
Duration of use Tm 20 y
Hardware fault tolerance 1
Characteristics of digital logic outputs Not galvanically isolated

2/10/21 - Subject to change - Festo AG & Co. KG

2/2