340AS002M16 GLENAIR
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 1
Technical content
www.glenair.com E-Mail: sales@glenair.comSeries 34 - Page 3 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 © 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324 Product Series Connector Designator Angle and Profile S = Straight Basic Part No. Finish (Table II) 1. Metric dimensions (mm) are indicated in parentheses. 2. Custom engraving available, consult factory. 3. When using Connector Designator B refer to pages 18 and 19 for part number development. TABLE III: ATTACHMENT OPTIONS Symbol C D E F G H N R S U Attachment No attachment, body strap only Bead chain, cres, passivate, with terminal Link chain, cres, passivate, with reverse link Wire rope, nylon jacket, with terminal Nylon rope, with terminal Wire rope, teflon jacket, with terminal Attachment omitted Wire rope, PVC jacket, with terminal #8 Sash chain, cres, passivate Wire rope, polyurethane jacket, with terminal TABLE IV: END FITTING Symbol A B C D E F E Dia. .140 (3.6) .167 (4.2) .182 (4.6) .191 (4.9) .125 (3.2) .218 (5.5)
340 F S 002 M 16-5 H 6 A
End Fitting Symbol (Table IV) Attachment Length (1/2 inch increments: e.g. 6 = 3 inches) Attachment Symbol (Table III) Length (1/2 inch increments: e.g. 5 = 2.5 inches, 1.0 Inch Minimum Order Length ) Shell Size (Table I) See inside back cover fold-out or pages 13 and 14 for unabrdiged Tables I and II. CONNECTOR DESIGNATORS A-B*-C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 3 DIRECT COUPLING 340-002 O-Ring Sealed Shorting Cap Backshell Direct Coupling .50 (12.7) Max Length ± .060 (1.52)A Thread (Table I) B (Table I) O-Ring Attachment Length ±.25 (6.4) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Back Cover for Complete Finish Information and Additional Finish Options E Dia (Table IV)