1414023 PHOENIX

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

https://www.phoenixcontact.com/pi/products/1414023 01/21/2022 Page 1 / 4 Housing screw connection - SACC-BP-F-M12/M15-6-SMD SCO - 1414023 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Housing screw connection, Socket, M12-SPEEDCON, Rear mounting, M15 x 1, The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Your advantages Reduced mounting costs thanks to two-piece device connector Easy device integration, thanks to mechanical port screw connections with threaded fastening Efficient PCB assembly: two-piece connectors for SMT soldering SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 20 pc Minimum order quantity 20 pc GTIN GTIN 4055626022659 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 (correctly plugged in and locked) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Standards/regulations M12 connector IEC 61076-2-101 In line with

https://www.phoenixcontact.com/pi/products/1414023 01/21/2022 Page 2 / 4 Housing screw connection - SACC-BP-F-M12/M15-6-SMD SCO - 1414023 Technical data General Insertion/withdrawal cycles > 100 Torque 1.5 Nm ... 2 Nm (Installation-side) Mounting type Rear mounting M15 x 1 Spacing between the top edge of the PCB and the back of the front plate: 6 mm Thread type M15 x 1 Material Material, knurls Zinc die-cast, nickel-plated Material Zinc die-cast (nickel-plated) Sealing material FKM (O-ring on housing) FKM (O-ring (pin connector pattern)) Additional material specifications Brass, nickel-plated (Locking nut) Cable Standards/specifications M12 connector IEC 61076-2-101 In line with Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 In line with Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing 1,25 0,75 11

1819 M12x1Ø13,8M15x1

eCl@ss eCl@ss 10.0.1 23100602 eCl@ss 11.0 23100602 eCl@ss 4.0 23100600 eCl@ss 4.1 23100600

https://www.phoenixcontact.com/pi/products/1414023 01/21/2022 Page 3 / 4 Housing screw connection - SACC-BP-F-M12/M15-6-SMD SCO - 1414023 Classifications eCl@ss eCl@ss 5.0 23100600 eCl@ss 5.1 23100600 eCl@ss 6.0 23100600 eCl@ss 7.0 23100602 eCl@ss 9.0 23100602 ETIM ETIM 4.0 EC001855 ETIM 6.0 EC002350 ETIM 7.0 EC002350 UNSPSC UNSPSC 13.2 31171603 UNSPSC 18.0 31171603 UNSPSC 19.0 31171603 UNSPSC 20.0 31171603 UNSPSC 21.0 31171603 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC B.01687

https://www.phoenixcontact.com/pi/products/1414023 01/21/2022 Page 4 / 4 Phoenix Contact 2022 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com