30QWK2C48 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

TOSHIBA Schottky Barrier Rectifier Stack Trench Schottky Barrier Type 3 0 Q W K 2 C 4 8 Switching Type Power Supply Application Converter & Chopper Application

  • Repetitive peak reverse voltage: VRRM = 120 V
  • Peak Forward Voltage: VFM = 0.85 V (max)
  • Average output rectified current: IO = 30 A
  • Low switching loses and output noise. Maximum Ratings Characteristics Symbol Rating Unit Repetitive peak reverse voltage V RRM 120 V Average output rectified current I O 30 A Peak one cycle surge forward current (sine wave) IFSM 250 (50 Hz) A Junction temperature T j −40~150 °C Storage temperature range T stg −40~150 °C Electrical Characteristics (Ta ==== 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Peak forward voltage V FM I FM = 15 A   0.85 V Repetitive peak reverse current I RRM V RRM = Rated (120 V)   50 µA Junction capacitance C j V R = 10 V, f = 1.0 MHz  227  pF Thermal resistance R th (j-c) DC Total   1.2 °C/W Note: V FM, IRRM, Cj: A value of one cell.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibi lity of th e buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, a nd to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury o r damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in th e most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handlin g Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
  • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfun ction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energ y control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion cont rol instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this docume nt shall be made at the customer’s own risk.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assume d by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from i ts use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others.
  • The information contained herein is subject to change without notice. 000707EAA1

Schottky barrier diodes are having large-reverse-current-leakage characteristic compare to other rectifier products. This current leakage and not proper operating temperature or voltage may cause thermal run. Please take forward and reverse loss into consideration when you design. ᶅ ᶃ ᶄ ˞1 MARK 30QWK2C TYPE 30QWK2C48 Lot Number Month (starting from alphabet A) Year (last number of the christian era)

Transient thermal impedance rth (j-c) ( ° C / W ) Surge forward current I FSM (A) Instantaneous forward voltage v F (V) iF – vF Instantaneous forward current i F (A) Average output rectified current I o ( A ) PF (AV) – Io Average forward power dissipation PF (AV) ( W ) Average output rectified current Io (A) Tc max – Io Average forward power dissipation Tc max (°C) Number of cycles Surge forward current (non-repetitive) Time t (s) rth (j-c) – t Reverse voltage V R (V) C j – VR (typical) Junction capacitance C j (pF) 160 140 120 100 32 28 24 20 16 4 8 12 α 360°0° Conduction angle α Rectangular waveform (one cell) 0.1 100 Tj = 150°C 25°C 75°C 100°C One cell 0 36 180° 120° α = 30° 60° 90° 4 8 12 16 20 24 28 32 α 360°0° Conduction angle α Rectangular waveform (one cell) 320 1 100 Ta = 25°C Single phase full Sine wave f = 50 Hz One cell 280 240 200 160 120 10 3 5 30 50 0.1 0.001 1000 0.01 0.1 1 100 10 One cell 0.3 0.5 1000 1 100 100 f = 1 MHz Ta = 25°C One cell 5 3 30 50 300 500

Junction temperature T j (°C) I R – Tj (typical) Reverse current I R ( m A ) Reverse voltage V R (V) P R (AV) – VR (typical) Average reverse power dissipation PR (AV) ( W ) 3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 40 80 120 60 20 100 60° 120° 180° 240° 300° DC VR Conduction angle α Tj = 150°C Rectangular waveform 360°0° 0.001 100 0.01 20 40 60 80 100 120 160 0.1 140 100 VR = 10 V 120 Pulse measurement (one cell)