30KPA_09 LITTELFUSE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

The 30KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Description

Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10x1000μs test waveform (Fig.1) (Note 1) PPPM 30000 W Steady State Power Dissipation on inifinite heat sink at TL=75ºC (Fig. 5) PD 8.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional only (Note 2) I FSM 400 A Operating Junction and Storage Temperature Range TJ, TSTG -55 to 175 °C Typical Thermal Resistance Junction to Lead RuJL 8.0 °C/W Typical Thermal Resistance Junction to Ambient RuJA 40 °C/W Notes: 1 . Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) t)BMPHFO'SFF t3P)4DPNQMJBOU t5ZQJDBMNBYJNVN temperature coefficient ΔVBR = 0.1% x VBR@25°C x ΔT t(MBTTQBTTJWBUFEDIJQ junction in P600 package t8QFBLQVMTF capability at 10×1000μs waveform, repetition rate (duty cycles):0.01% t'BTUSFTQPOTFUJNF typically less than 1 .0ps from 0 Volts to BV min t&YDFMMFOUDMBNQJOH capability t-PXJODSFNFOUBMTVSHF resistance t5ZQJDBM* R less than 2μA above 73V t)JHIUFNQFSBUVSF soldering guaranteed: 260°C/40 seconds / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension t1MBTUJDQBDLBHFIBT Underwriters Laboratory Flammability classification 94V-O t.BUUF5JO-FBEoGSFFQMBUFE AGENCY AGENCY FILE NUMBER E230531 Agency Approvals RoHS

T ransient Voltage Suppression Diodes Revision: January 09, 2009 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Leaded – 30000W > 30KPA series 30KPA Series Please refer to http://www.Littelfuse.com/series/30KPA.html for current information.

Electrical Characteristics

(Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) Breakdown Voltage VBR (Volts) @ IT Test Current IT (mA) Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR @VR (μ A) Maximum Clamping Voltage VC @ IPP (V) Agency Approval MIN 30KPA28A 30KPA28CA 28 31 .28 50 606.0 5000 50.0 X 30KPA30A 30KPA30CA 30 33.51 50 548.9 5000 55.2 X 30KPA33A 30KPA33CA 33 36.90 50 517 .9 5000 58.5 X 30KPA36A 30KPA36CA 36 40.20 50 490.3 5000 61 .8 X 30KPA39A 30KPA39CA 39 43.60 20 450.9 2000 67 .2 X 30KPA42A 30KPA42CA 42 46.90 10 420.8 1000 72.0 X 30KPA43A 30KPA43CA 43 48.00 10 415.1 1000 73.0 X 30KPA45A 30KPA45CA 45 50.30 5 391 .5 250 77 .4 X 30KPA48A 30KPA48CA 48 53.60 5 371 .3 150 81 .6 X 30KPA51A 30KPA51CA 51 57 .00 5 350.7 50 86.4 X 30KPA54A 30KPA54CA 54 60.30 5 331 .5 20 91 .4 X 30KPA58A 30KPA58CA 58 64.80 5 327 .9 20 92.4 X 30KPA60A 30KPA60CA 60 67 .00 5 297 .1 15 102.0 X 30KPA64A 30KPA64CA 64 71 .50 5 291 .3 10 104.0 X 30KPA66A 30KPA66CA 66 73.70 5 283.2 2 107 .0 X 30KPA70A 30KPA70CA 70 78.20 5 278.0 2 109.0 X 30KPA71A 30KPA71CA 71 79.30 5 271 .7 2 111 .5 X 30KPA72A 30KPA72CA 72 80.40 5 265.8 2 114.0 X 30KPA75A 30KPA75CA 75 83.80 5 253.8 2 119.4 X 30KPA78A 30KPA78CA 78 87 .10 5 234.9 2 129.0 X 30KPA84A 30KPA84CA 84 93.80 5 217 .7 2 139.2 X 30KPA90A 30KPA90CA 90 100.50 5 207 .0 2 146.4 X 30KPA96A 30KPA96CA 96 107 .20 5 194.2 2 156.0 X 30KPA102A 30KPA102CA 102 113.90 5 183.0 2 165.6 X 30KPA108A 30KPA108CA 108 120.60 5 172.9 2 175.2 X 30KPA120A 30KPA120CA 120 134.00 5 155.9 2 194.4 X 30KPA132A 30KPA132CA 132 147 .40 5 142.3 2 213.0 X 30KPA144A 30KPA144CA 144 160.80 5 135.8 2 223.2 X 30KPA150A 30KPA150CA 150 167 .60 5 129.8 2 233.4 X 30KPA156A 30KPA156CA 156 17 4.30 5 123.7 2 245.0 X 30KPA160A 30KPA160CA 160 178.70 5 120.0 2 252.6 X 30KPA168A 30KPA168CA 168 187 .70 5 111 .2 2 272.4 X 30KPA170A 30KPA170CA 170 189.90 5 110.2 2 275.0 X 30KPA180A 30KPA180CA 180 201 .10 5 104.3 2 290.4 X 30KPA198A 30KPA198CA 198 221 .20 5 94.7 2 319.8 X 30KPA216A 30KPA216CA 216 241 .30 5 86.9 2 348.6 X 30KPA240A 30KPA240CA 240 268.10 5 78.3 2 387 .0 X 30KPA258A 30KPA258CA 258 288.20 5 72.8 2 416.4 X 30KPA260A 30KPA260CA 260 290.40 5 72.8 2 416.0 X 30KPA270A 30KPA270CA 270 301 .60 5 69.5 2 436.2 X 30KPA280A 30KPA280CA 280 312.80 5 65.3 2 464.0 X 30KPA288A 30KPA288CA 288 321 .70 5 64.5 2 469.9 X For bidirectional type having VRWM of 60 volts and less, the IR limit is double. For parts without A , the VBR is ± 10%.

T ransient Voltage Suppression Diodes Revision: January 09, 2009 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Leaded – 30000W > 30KPA series 30KPA Series Please refer to http://www.Littelfuse.com/series/30KPA.html for current information. Physical Specifications Weight 0.07oz., 2.5g Case P600 molded plastic body over passivated junction. Polarity Color band denotes the cathode except Bipolar. T erminal Matte Tin axial leads, solderable per JESD22-B102D. Dimensions Dimensions Inches Millimeters Min Max Min Max A 1 .000 - 25.40 - B 0.340 0.360 8.60 9.10 C 0.048 0.052 1 .22 1 .32 D 0.340 0.360 8.60 9.10 P600 Environmental Specifications T emperature Cycle JESD22-A104 Pressure Cooker JESD 22-A102 High T emp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 Soldering Parameters Temperature (T Time (t) Ts(min) Ts(max) TL TP ts Preheat tL tp Ramp-up Critical Zone TL to TP Ramp-down t 25˚C to Peak 25˚C Reflow Condition -FBEoGSFFBTTFNCMZ Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) oTFDT Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) oTFDPOET Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) oTFDPOET Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Flow/Wave Soldering (Solder Dipping) Peak T emperature : 265OC Dipping Time : 10 seconds Soldering : 1 time C B AA D

©2009 Littelfuse, Inc. Specifications are subject to change without notice. T ransient Voltage Suppression Diodes Revision: January 09, 2009 30KPA Series Axial Leaded – 30000W > 30KPA series Please refer to http://www.Littelfuse.com/series/30KPA.html for current information. 30KPA Series Part Numbering System Packaging Part Number Component Package Quantity Packaging Option Packaging Specification 30KPAxxxXX P600 800 Tape & Reel EIA STD RS-296E 30KPAxxxXX-B P600 500 BULK Littelfuse Concord Packing Spec. DM-0016 VOLTAGE CODE (Refer to the Electrical Characteristics table) TYPE CODE: A Uni-Directional (5% Voltage Tolerance) CA Bi-Directional OPTION CODE: BLANK Reel Tape -B Bulk Packaging SERIES CODE 30KPA xxxXXX Part Marking System F 30KPAXXX Product Type Littelfuse Logo Cathode Band