DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
3087_en_A FL SWITCH SF… Data sheet © PHOENIX CONTACT 2012-10-25 1D e s c r i p t i o n The FL SWITCH SF… range of Factoryline switches with standard functions in numerous versions can be used for quick and cost-effective Ethernet network expansion. The switches have 8 or 16 ports, up to two of which are multi- mode glass fiber ports provided in the SC or ST format. The twisted pair ports of the switches support both Ethernet with a transmission speed of 10 Mbps and fast Ethernet with a transmission speed of 100 Mbps. The glass fiber ports only support 100 Mbps. The switches regenerate received data telegrams and send them to the port to which the device is connected with the corresponding target address.
2 Features and fields of application
– Increased network performa nce by filtering the data traffic. – Local data traffic remains local. – The data volume in the network segments is reduced. – Easy network expansion without configuration of the switch. – Coupling copper network segments with different bit rates. – Automatic detection of the data transmission speed of 10 or 100 Mbps. – Auto negotiation: Each copper port establishes a half or full duplex connection with 10 or 100 Mbps. – Auto crossing: It is not necessary to make a distinction between 1:1 or crossover Ethernet copper cables. – Electrical isolation of network segments using up to two fiber optic ports. – Increasing the maximum cable length to 10,000 m (62.5/125 µm) or to 6400 m (50/125 µm) using a fiber optic port. – Floating alarm output: The al arm output can be used to monitor the redundant voltage supply. Please note the different connection directions of the transmission media: Copper cables are connected at the front, glass fiber cables at the bottom. Make sure you always use the latest documentation. It can be downloaded at www.phoenixcontact.net/catalog. This data sheet is valid for all products listed on the following page: Factoryline switches with standard functions
FL SWITCH SF… 3087_en_A PHOENIX CONTACT 2 3O r d e r i n g d a t a Products Description Type Order No. Pcs. / Pkt. Ethernet switch with 8 RJ45 ports FL SWITCH SF 8TX 2832771 1 Ethernet switch with 7 RJ45 ports and 1 fiber optic port in SC format FL SWITCH SF 7TX/FX 2832726 1 Ethernet switch with 6 RJ45 ports and 2 fiber optic ports in SC format FL SWITCH SF 6TX/2FX 2832933 1 Ethernet switch with 16 RJ-45 ports FL SWITCH SF 16TX 2832849 1 Ethernet switch with 15 RJ45 ports and 1 fiber optic port in SC format FL SWITCH SF 15TX/FX 2832661 1 Ethernet switch with 14 RJ45 ports and 2 fiber optic ports in SC format FL SWITCH SF 14TX/2FX 2832593 1 Ethernet switch with 7 RJ45 ports and 1 fiber optic port in ST format FL SWITCH SF 7TX/FX ST 2832577 1 Ethernet switch with 6 RJ45 ports and 2 fiber optic ports in ST format FL SWITCH SF 6TX/2FX ST 2832674 1 Accessories Description Type Order No. Pcs. / Pkt. Rail adapter for mounting the 8-port switch at an angle of 90° FL RA SF8 2832519 1 Universal end clamp E/NS 35 N 0800886 50 RJ45 connector set; gray for 1:1 cables (pack of 2) FL PLUG RJ45 GR/2 2744856 1 RJ45 connector set; green for crossover cables (pack of 2) FL PLUG RJ45 GN/2 2744571 1 Double sheathed Ethernet cable FL CAT5 HEAVY 2744814 - Flexible Ethernet cable FL CAT5 FLEX 2744830 - Assembly tool for RJ45 connector FL CRIMPTOOL 2744869 1 Patchbox 8 x RJ45 CAT5e, pre-assembled, can be retrofitted FL PBX 8TX 2832496 1 Patchbox 6 x RJ45 CAT5e and 4 SC-RJ, glass pre-assembled, can be retrofitted FL PBX 6TX/4FX 2832506 1 Patch cable, CAT 5, pre-assembled, 0.3 m long FL CAT5 PATCH 0,3 2832250 10 Patch cable, CAT 5, pre-assembled, 0.5 m long FL CAT5 PATCH 0,5 2832263 10 Patch cable, CAT 5, pre-assembled, 1.0 m long FL CAT5 PATCH 1,0 2832276 10 Patch cable, CAT 5, pre-assembled, 1.5 m long FL CAT5 PATCH 1,5 2832221 10 Patch cable, CAT 5, pre-assembled, 2.0 m long FL CAT5 PATCH 2,0 2832289 10 Patch cable, CAT 5, pre-assembled, 3.0 m long FL CAT5 PATCH 3,0 2832292 10 Patch cable, CAT 5, pre-assembled, 5.0 m long FL CAT5 PATCH 5,0 2832580 10 Patch cable, CAT 5, pre-assembled, 7.5 m long FL CAT5 PATCH 7,5 2832616 10 Patch cable, CAT 5, pre-assembled, 10.0 m long FL CAT5 PATCH 10 2832629 10 Dust protection caps for RJ45 sockets FL RJ45 PROTECT CAP 2832991 10
FL SWITCH SF… 3087_en_A PHOENIX CONTACT 3
4 Technical data
Function Switch/repeater; conforms to standard IEEE 802.3 Latency of the communication processor 6 µs plus frame time (16-port version) 8 µs plus frame time (8-port version) Housing dimensions (width x height x depth) in mm 8-port switch (RJ45) 135 x 80 x 30 (without COMBICON) 135 x 94 x 30 (with COMBICON) 8-port switch (fiber optics) 135 x 89 x 30 (without COMBICON) 135 x 103 x 30 (with COMBICON) 16-port switch (RJ45) 200 x 80 x 30 (without COMBICON) 200 x 94 x 30 (with COMBICON) 16-port switch (fiber optics) 200 x 80 x 30 (without COMBICON) 200 x 103 x 30 (with COMBICON) Permissible operating temperature 0°C to 55°C Permitted storage temperature -20°C to 70°C Degree of protection IP20, DIN 40050, IEC 60529 Class of protection Class 3 VDE 0106; IEC 60536 Humidity (operation) 5% to 95%, no condensation Humidity (storage) 5% to 95%, no condensation Air pressure (operation) 86 kPa to 108 kPa, 1500 m above sea level Air pressure (storage) 66 kPa to 108 kPa, 3500 m above sea level Preferred mounting position Perpendicular to a standard DIN rail Connection to protective earth ground Snapped onto a grounded DIN rail Weight 8-port switch 260 g, typical 16-port switch 380 g, typical Supply voltage (US) Connection Via COMBICON; conductor cross-section 2.5 mm2, maximum Nominal value 24 V DC Permissible ripple 3.6 V pp within the permissible voltage range Permissible voltage range 18.5 V DC to 30.2 V DC Current consumption at US Depends on the device - see the following table Inrush current 9 A Protection against polarity reversal None Test voltage 500 V DC for 1 minute Power consumption Depends on the device - see the following table Module Current consumption Power consumption FL SWITCH SF 8TX 200 mA 4.8 W FL SWITCH SF 7TX/FX (ST) 220 mA 5.28 W FL SWITCH SF 6TX/2FX (ST) 240 mA 5.76 W FL SWITCH SF 16TX 300 mA 7.2 W FL SWITCH SF 15TX/FX 330 mA 7.92 W FL SWITCH SF 14TX/2FX 360 mA 8.64 W
FL SWITCH SF… 3087_en_A PHOENIX CONTACT 4 Interfaces Total number of Ethernet interfaces 8/16 Properties of RJ45 ports Number 6, 7, 8, 14, 15 or 16 depending on the device version Connection format 8-pos. RJ45 socket on the switch Connection medium Twisted pair cable with a co nductor cross-section of 0.14 mm² to 0.22 mm² Cable impedance 100 Transmission speed 10/100 Mbps Maximum network segment expansion 100 m Properties of fiber optic ports Number 0, 1 or 2 depending on the device version Connection format SC duplex socket or ST socket on the switch Wavelength 1300 nm Laser protection Class 1 according to DIN EN 60825-1:2001-11 Minimum transmission length, including 3 dB system reserve 6.4 km glass fiber with F-G 50/125 0.7 dB/km F1200 2.8 km glass fiber with F-G 50/125 1.6 dB/km F800 10 km glass fiber with F-G 62.5/125 0.7 dB/km F1000 3 km glass fiber with F-G 62.5/125 2.6 dB/km F600 Dynamic (average) transmission power (fiber type) in link mode Minimum Maximum -24 dBm (50/125 µm) / -19 dBm (62.5/125 µm) -14 dBm (50/125 µm) / -14 dBm (62.5/125 µm) Minimum receiver responsiveness -32 dBm (dynamic) Maximum overrange -14 dBm (dynamic) Transmission speed 100 Mbps Alarm contact Voltage 24 V DC, typical Current carrying capacity 100 mA, typical Mechanical tests Shock test according to IEC 60068-2-27 Operatio n: 25g, 11 ms period, half-sine shock pulse Storage/transport: 50g, 11 ms period, half-sine shock pulse Vibration resistance according to IEC 60068-2-6 Operation/storage/transport: 5g, 150 Hz, criterion 3 Free fall according to IEC 60068-2-32 1 m Conformance with EMC directives Developed according to IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B IEC 61000-4-3 (radiated-noise immunity) Criterion A IEC 61000-4-4 (burst) Criterion A IEC 61000-4-5 (surge) Criterion B IEC 61000-4-6 (conducted noise immunity) Criterion A IEC 61000-4-8 (noise immunity against magnetic fields) Criterion A EN 55022 (noise emission) Class A Approvals c U Class I, Div. 2 E199827 u E140324 ROHS EEE 2002/95/EC, WEEE 2002/96/EC
FL SWITCH SF… 3087_en_A PHOENIX CONTACT 5
5 Dimensions
7009_00 First version 7009_01 Technical data modified and module marking updated 7009_02 Fiber optic technical data and alarm contact wiring modified 7009_03 Approvals added 7009_04 Port numbering and rail adapter added 7009_05 ST versions added 7009_06 Values for humidity changed, approval added 3087_A Changed document number LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 US1 US2 FL SWITCH SF 8TX Ord.-No.: 2832771 US1 US2 FL SWITCH SF 14TX/2FX Ord.-No.: 2832593 LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 100 LNK/ACT LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 100 LNK/ACT X11 X13 X15 X10 X12 X14 X16 X17
FL SWITCH SF… 3087_en_A PHOENIX CONTACT 6
6 Housing versions an d position of the fiber optic connections
The housings of the 8-port versions are identical. On the fiber optic versions, the connections for the fiber optic ports are at the bottom (see also Figure 3). Figure 2 Housing examples for 8-port switches - FL SWITCH SF 8TX (left)/FL SWITCH 7TX/FX ST (right) The housings of the 16-port versions are identical. On the fiber optic versions, the connections for the fiber optic ports are at the bottom. Figure 3 Housing example for 16-port switches (FL SWITCH 14TX/2FX) LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 US1 US2 FL SWITCH SF 8TX Ord.-No.: 2832771 US1 GND US2 GND R1 R2 NC 700901000 LNK/ACT LNK/ACT 100 100 US1 US2 US1 GND US2 GND R1 R2 NC LNK/ACT 100 FL SWITCH SF 7TX/FX ST Ord. No.2832577 LNK/ACT 100 TD RD LNK/ACT LNK/ACT 100 100 LNK/ACT 100 LNK/ACT 100 X4X3 US1 US2 FL SWITCH SF 14TX/2FX Ord.-No.: 2832593 LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 100 LNK/ACT LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100 100 100 100 100 LNK/ACT X11 X13 X15 X10 X12 X14 X16 X17
FL SWITCH SF… 3087_en_A PHOENIX CONTACT 7
7 Local diagnostic and status indicators
8 General information 9 Installation
Install the FL SWITCH SF… modu le on a clean DIN rail. To avoid contact resistance only use clean, corrosion-free DIN rails. End clamps can be mounted on both sides of the module to stop the modules from slipping on the DIN rail.
9.1 Mounting
- Place the module onto th e DIN rail from above. The upper holding keyway of the module must be hooked onto the top edge of the DIN rail. 2. Push the module from the front towards the mounting surface. 3. Once the module is snapped on properly, check that it is fixed securely on the DIN rail.
9.2 Removal
- Insert a suitable tool (e.g., needle-nose pliers) into the arresting latch and pull it down. 2. Pull the module slightly away from the mounting surface. 3. Lift the module from the DIN rail. Des. Color Status Meaning US1 Green On Supply voltage US1 in the tolerance zone Off Supply voltage US1 too low US2 Green On Supply voltage US2 in the tolerance zone Off Supply voltage US2 too low One LED per port LNK/ACT Green On Link active Flashing Active telegram Off Link not active
100 Yellow On Data transmi ssion speed 100 Mbps
Off Data transmission speed not 100 Mbps CAUTION: Disregarding this warning may result in damage to equipment and/or serious personal injury. Only qualified personnel may start up and operate this device. According to the safety instructions in this text, qualified personnel are persons who are authorized to start up, to ground, and to mark devices, systems, and equipment according to the standards of safety technology. In addition, these persons must be familiar with all warning instructions and maintenance measures in this text. NOTE: The FL SWITCH SF… module is designed exclusively for SELV operation according to IEC 950 / EN 60950 / VDE 0805. WARNING: EXPLOSION HAZARD – This equipment is suitab le for use in Class I, Zone 2, Groups A,B,C, and D or non- hazardous locations only. – Substitution of components may impair suitability for Class I, Zone 2. – Do not disconnect equipment unless power has been switched off or the area is known to be non-hazardous. Connect the DIN rail to protective earth ground using a grounding terminal block. The modules are grounded when snapped onto the DIN rail. Connect protective earth ground with low impedance.
FL SWITCH SF… 3087_en_A PHOENIX CONTACT 8
9.3 Terminal assignment
Figure 4 Terminal assignment
9.4 Connecting the supply voltage
Figure 5 Typical supply of the module from one or two voltage sources Supplying the module from one voltage source Terminal Meaning
1 Supply voltage +US1
3 Supply voltage +US2
5 Alarm contact 1 (R1)
6 Alarm contact 2 (R2)
7 Functional earth ground
/G55 /G53 /G31 /G47 /G4E /G44 /G47 /G4E /G44 /G55 /G53 /G32 /G52 /G31 /G52 /G32 /G4E /G43 /G31 /G20 /G20 /G20 /G32 /G20 /G20 /G20 /G33 /G20 /G20 /G20 /G34 /G20 /G20 /G20 /G35 /G20 /G20 /G20 /G36 /G20 /G20 /G20 /G37 /G20 /G20 /G20 /G38 /G37 /G30 /G30 /G39 /G30 /G30 /G30 /G30 /G35 The module is operated using a +24 V DC SELV. The module is fully operational even with only one supply voltage (without jumpering it to other supply voltage terminal blocks) and/or without wiring the alarm contact. The alarm contact is open if voltage is present at both supply voltage terminal blocks US1 and US2. In the event of an error at one of the two voltage sources, the contact is closed. If the voltage is not supplied redundantly, terminal blocks US1 and US2 must be jumpered (see Figure 4, version 1), so that the voltage can be monitored via the alarm contact. Option: In addition, noise immunity can be increased in environments subject to high EMI by a low-impedance connection to functional earth ground via terminal block 7.
FL SWITCH SF… 3087_en_A 9PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany www.phoenixcontact.com
9.5 Ethernet interface
The FL SWITCH SF… module ha s up to sixteen Ethernet ports on the front in RJ45 format, to which only twisted pair cables with an impedance of 100 can be connected. The data transmission speed is 10 Mbps or 100 Mbps. In addition, each port has an auto crossing function: It is not necessary to make a distinction between 1:1 or crossover Ethernet cables. Figure 6 Pin assignment of the Ethernet ports in RJ45 format
9.6 Switching features of the FL SWITCH SF…
All data telegrams received by the switch are stored and checked for validity. Invalid or faulty data packets (> 1522 bytes or CRC errors) and fragments (< 64 bytes) are rejected. Valid data telegrams are forwarded by the switch. The switch always forwards the data using the data transmission speed used in the target network segment. Multi-address function The switch automatically learns the addresses of termination devices, which are connected via the port, by evaluating the source addresses in the data telegrams. Only packets with unknown addresses, with a source address of this port or with a multicast/broadcast address in the target address field are forwarded via the corresponding port. The switch can store up to 2k (8-port version) or 8k (16-port version) addresses in its address table with an aging time of five minutes. This is important when more than one termination device is connected to one or more ports. In this way, several independent subnetworks can be connected to one switch.
10 Mounting option
Using the FL RA SF8 rail adapter the 8-port SF switches can also be mounted on the DIN rail at an angle of 90°. In addition, the switch can be fixed on the DIN rail using the E/NS 35 universal end clamp. Figure 7 FL SWITCH SF 8TX rotated 90° and DIN rail- mounted A restart deletes the entire address table. /G50 /G69 /G6E /G20 /G31 /G50 /G69 /G6E /G20 /G32 /G50 /G69 /G6E /G20 /G33 /G50 /G69 /G6E /G20 /G34 /G50 /G69 /G6E /G20 /G35 /G50 /G69 /G6E /G20 /G36 /G50 /G69 /G6E /G20 /G37 /G50 /G69 /G6E /G20 /G38 /G52 /G44 /G2B /G52 /G44 /G2D /G54 /G44 /G2B /G54 /G44 /G2D /G6E /G2E /G63 /G2E /G6E /G2E /G63 /G2E /G6E /G2E /G63 /G2E /G6E /G2E /G63 /G2E /G52 /G4A /G34 /G35 LNK/ACT LNK/ACT LNK/ACT LNK/ACT 100100100100 LNK/ACT LNK/ACT LNK/ACT LNK/ACT100100100100 US1 US2 FL SWITCH SF 8TXOrd.-No.: 2832771 X1X3X5X7 X2X4X6X8