3027W2PAT78N20X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD 3027W2PAT78N20X CONEC ABC dim. in mm RR RR date drawn Inventor 10 THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 13K1A3703 D-SUB COMBINATION MALE 90° SEE NOTES Lehmenkühler16.06.11

16.06.11 Koch

with threaded insert and metal bracket 2:1 (5:1) 3027W2PAT78N20X a Original 7,28 0,3 10,12 0,3 4,35\ 0,2 4-40 UNC METAL BRACKET 11,3 m ax. 12,2 SEE NOTE 9 55,3-0 0,25+ 63,5\ 0,13 69,39-0,45 0,31+ 12,6 -0,43 0,33 + 8,26-0,03 0,22+ -0,31 0,9 NOTES: 1. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 2. INSULATORS: PBT GF UL 94 V-0; GREEN 3. SIGNAL CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL 4. COAXIAL CONTACTS 50 OHM: COPPER ALLOY PLATING INNER CONDUCTOR: 50µin HARD GOLD over min. 50µin NICKEL PLATING OUTER CONDUCTOR: MATING AREA: 30µin HARD GOLD over min. 50µin NICKEL TERMINATION SIDE: GOLD FLASH over NICKEL 5. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. P.C.B. HOLE DRILLINGS ON SHEET 2 8. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB 9. CONNECTOR IS PART MARKED: 3027W2PAT78N20X CO NEC ABC 3,18 n (2x) 2,25 0,57n \ 0,05 (25x) Directive 2002/95/EC RoHS compliant 8,55 0,2 9,34 0,3 11,88 0,3 14,42 0,3 6,35\ 0,3 11\` 0,3 n 0,8 (2x) 0,6 o (4x) COAXIAL CONTACTS 10° SIGNAL CONTACTS

dim. in mm RR RR date drawn Inventor 10 THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 13K1A3703 P.C.B. HOLE DRILLINGS SEE SHEET 1 Lehmenkühler16.06.11 D-SUB COMBINATION MALE 90° 27W2P with threaded insert and metal bracket 3:1 SEE SHEET 1 a Original 2,77\ 0,1 5,54\ 0,1 8,28\ 0,1 11,05\ 0,1 13,82\ 0,1 16,56\ 0,1 63,5\ 0,13 1,38\ 0,1 4,14\ 0,1 6,91\ 0,1 9,68\ 0,1 12,42\ 0,1 15,19\ 0,1 1 -0 0,1+n (31x)9,45 8,18 0,1 2,84 0,1 3,1\ 0,1n (2x) P.C.B. EDGE10,24 0,1 2,54 0,1 5,08 0,1 P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) 22,68\` 0,1