3000-U07-00 AMKA

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 1

Technical content

Electronic Locking & Monitoring 3 0 0 0 -U 07 © EMKA Electronic, all rights reserved Rev . 20 11-07-12 / Roh -Art. -Nr. 1349 Page 1 of 1 GND 12V GND KPT1 KPT2 GND 12V 12V GND 12V GND KPT1 KPT2 GND 12V 12V ERM1/1 ERM1/2 ERM2/1 ERM2/2 white (blue) (-) brown (+) Connecting cable Handle 1 ERM1/1 ERM1/2 ERM2/1 ERM2/2 white (blue) (-) brown (+) Connecting cable Handle 2 GND 12V GND KPT1 KPT2 GND 12V 12V ERM1/1 ERM1/2 ERM2/1 ERM2/2 Control Module 3000-U07-00 white brown green yellow GND +12VDC Keypad +12 V DC Keypad / Handle 1 Keypad / Handle 2 Keypad / Ground Push Button Operation GND +12VDC Power Supply Power Supply Keypad Operation Push button / Handle 1 Push button / Handle 2 Push button / Ground Expansion module / Ground Expansion module / Power Supply Handle 1 / Solenoid connector 1 Handle 1 / Solenoid connector 2 Handle 2 / Solenoid connector 1 Handle 2 / Solenoid connector 2 Note for Push Button Operation Closing contact of push button longer than 200 ms may damage control module Control Module 3000-U07-00 Control Module 3000-U07-00 Steuermodul Stand Alone Das Modul 3000-U07 ist Bestandteil des ELM Stand Al one Systems. Es dient zum Öffnen von 2 Schwenkgriff en mit Magnetbaustein 3000-U05. Die Öffnung der Griffe erf olgt normalerweise über die Tastatur des ELM Stand Alone Systems. Alternativ kann der Öffnungsvorgang auch über einen Kontakt erfolgen. Die maximale Schließdauer ist un bedingt zu beachten. Technische Änderungen vorbehalten. Control Module Stand Alone The module 3000-U07 is part of the ELM Stand Alone System. It is used to open 2 swing handles with sol enoid block 3000-U05. Opening is normally via ELM Stand Alone keypad. Alt ernatively opening procedure can be performed via s witch contact. In this case maximum allowed closing time of contact must n ot be exceeded. Subject to technical changes Dimensions: 65 x 45 x 25 mm³ (L x W x H) Board: H2m7v1 Power supply: +12 V, 500 mA Fig. 1: 3000-U07 Fig. 2: Wiring Diagram