3.0SMCJ WEITRON

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

5.0 to 170 Volts Peak Pulse Power

3000 Watt

Transient Voltage Suppressor Features: Mechanical Data: SMC(DO-214AB) 1/4 03-Nov-06 http://www.weitron.com.tw WEITRON Symbol PPPM 3000(Min) W IPPM SEE TABLE 1 A TJ +150 -55 to +150 Notes : 1. Non-repetitive current pulse , per Fig. 3 and derated above TA= 25°C per Fig.2. 2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal. 3. 8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 300 Peak Pulse Current of on 10/1000µs waveform (Note 1,FIG.3) Rating Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load,(JEDEC Method) (Note2, 3) A Operating junction Temperature Range MAXIMUM RATINGS AND CHARACTERISTICS(TA=25°C Unless otherwise specified) IFSM UnitsValue Storage Temperature Range TSTG Lead(Pb)-FreePb

3.0 SMCJ Series

  • For surface mounted applications in order to optimize board space * Low profile package * Built-in strain relief * Glass passivated junction * Low inductance * Excellent clamping capability * Repetition Rate (duty cycle):0.01% * Fast response time: typically less than 1.0ps from

0 Volts to BV for unidirectional types

  • Typical IR less than 1µA above 10V * High temperature soldering: 250°C/10 seconds at terminals * Plastic package has Underwriters Laboratory Flammability 94V-O * Case: JEDEC DO214AB. Molded plastic over glass passivated junction * Terminal: Solderable per MIL-STD-750, Method 2026 * Polarity: Color band denoted positive end (cathode) except Bidirectional * Standard Packaging: 16mm tape (EIA STD RS-481) * Weight: 0.21 gram DEVICES FOR BIPOLAR APPLICATION Peak Pulse Power Dissipation on 10/1000µs waveform (Note 1,2,FIG.1) For Bidirectional use C or CA Suffix for types SMCJ5.0 thru types SMCJ170 (e.g. SMCJ5.0C , SMCJ170CA)Electrical characteristics apply in both directions

http://www.weitron.com.tw WEITRON UNI- POLAR BI-POLAR UNI BI For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is + 10% BREAKDOWN VOLTAGE VBR(V) MIN.@IT REVERSE LEAKAGE @ VRWM IR(µA) BREAKDOWN VOLTAGE VBR(V) MAX.@IT TEST CURRENT IT (mA) MAXIMUM CLAMPING VOLTAGE @Ipp Vc(V) PEAK PULSE CURRENT Ipp (A)

3.0 SMCJ

VRWM(V) SMCJ5.0A SMCJ5.0CA RDE

http://www.weitron.com.tw WEITRON RATINGS AND CHARACTERISTIC CURVES t - Time(ms) 150 1.0 2.0 tr = 10µsec. Peak Value IPPM TJ = 25°C Pulse Width(td)is defined as the point where the peak current decays to 50% of I PPM 10/1000µsec.Waveform as defined by R.E.A. td Fig.3 Pulse Waveform 4.0 Half Value- IPPM 100 I MPP I %,tnerruC esluP kaeP - MSR 3.00 100 0 25 50 75 100 125 150 175 200 Fig.2 Pulse Derating Curve P( rewoP esluP kaeP PP ) I( tnerruC ro PP ) %,egatnecreP ni gnitareD TA - Ambient Temperature (°C) 0.1 100 10ms0.1µ 1.0µ 10µs 100µs 1.0ms td - Pulse Width Fig.1 Peak Pulse Power Rating P MPP )Wk( rewoP esluP kaeP- Non-repetitive pulse waveform shown in Fig.3 TA = 25°C 100 1000 10000 CJ )Fp( ecnaticapaC - Fig.4 Typical Junction Capacitance VWM - Reverse Stand-Off Voltage (V) Unidirectional Bidirectional f = 1MHz Vsig = 50mVp-p TJ = 25°C VR = 0 500100 VR = Rated Stand-off Voltage 100 150 200 250 300 1 10 100 I MSF )A( tenrruC egruS drawroF kaeP, 8.3ms Single Half Sine-Wave (JEDEC Method) 0.1 100 10000.00 0.01 0.1 10 100 td - Pulse Duration (sec.) )W/C i(ecnadepmI lamrehT tneisnartP Fig.5 Type Transient ThermalImpedance Number of Cycles at 60 HZ Fig.6 Maximum Non-repetitive ForwardSurge current Ratings andCharacteristic Curves(TA=25℃ unless otherwise noted)

A B C D E G H J 4/4 03-Nov-06 http://www.weitron.com.tw WEITRON SMC Outline Dimension Unit:mm SMC Dim Min Max 5.59 6.60 2.75 0.15 7.75 0.10 0.76 2.00 6.22 7.11 3.18 0.31 8.13 0.20 1.52 2.62