3.0SMCJ5.0A MDE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

FEATURES

  • For surface mounted applications in order to optimize board space
  • Low profile package
  • Built-in strain relief
  • Glass passivated junction
  • Low inductance
  • Excellent clamping capability
  • Repetition rate (duty cycle):0.01%
  • Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types
  • Typical IR less than 1µA above 10V
  • High temperature soldering: 250°C/10 seconds at terminals
  • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O MECHANICAL DATA Case: JEDEC DO214AB. Molded plastic over glass passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bidirectional Standard Packaging: 1 6mm tape (EIA STD RS-481) Weight: 0.007 ounces, 0.021 grams) Ratings at 25°C ambient temperature unless otherwise specified. RATING SYMBOL VALUE UNITS Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1, 2, Fig.1) IPPM SEE TABLE 1 Amps Superimposed on Rated Load, (JEDEC Method)(Note2, 3) Operatings and Storage Temperature Range T J, TSTG -55 +150 °C NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. Certified RoHS Compliant UL File # E223026 Electrical characteristics apply in both directions. PPPM Minimum 3000 Watts Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3) IFSM 300 AmpsPeak Forward Surge Current, 8.3ms Single Half Sine-wave 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com MDE Semiconductor, Inc. MAXIMUM RATINGS AND CHARACTERISTICS DEVICES FOR BIPOLAR APPLICATIONS 3.0SMCJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 TO 170 Volts

3000 Watt Peak Pulse Power

78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414

MDE Semiconductor, Inc. 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com RATING AND CHARACTERISTIC CURVES 3.0SMCJ SERIES 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 t - Time(ms) 3.0 4.0 150 1.0 2.0 tr = 10μsec. Peak Value IPPM TJ = 25°C Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM 10/1000μsec.Waveform as defined by R.E.A. td Fig.3 - Pulse Waveform 4.0 Half Value- IPPM 100 IPPM - Peak Pulse Current,% IRSM 3.00 12.5 37.5 62.5 87.5 100 0 25 50 75 100 125 150 175 200 Fig.2 - Pulse Derating Curve Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% TA - Ambient Temperature (°C) 100 1000 10000 1 10 100 1000 100 1000 10000CJ - Capacitance (pF) Fig. 4 - Typical Junction Capacitance VWM - Reverse Stand-Off Voltage (V) Unidirectional Bidirectional f = 1MHz Vsig = 50mVp-p TJ 25°C VR = 0 500 VR = Rated Stand-off PM(AV),Steady State Power Dissipation (W) 0 25 50 75 100 125 150 175 200 1.0 2.0 3.0 4.0 Fig. 5 - Steady State Power Derating Curve TL - Lead Temperature (°C) 5.0 6.0 7.0 8.0 60Hz Resistive or Inductive Load 100 150 200 250 300 1 10 100 Number of Cycles at 60 Hz Fig.6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only 8.3ms Single Half Sine-Wave (JEDEC Method)TJ=TJ max. IFSM-Peak Forward Surge Current (A) 0.1 100 10ms0.1μs 1.0μs 10μs 100μs 1.0ms td - Pulse Width (sec.) Fig. 1 - Peak Pulse Power Rating Curve PPPM-Peak Pulse Power (kW) Non-repetitive pulse waveform shown in Fig.3 T A = 25°C

3000 Watt Surface Mount TVS

For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is ± 10% Certified RoHS Compliant UL File # E223026 MDE Semiconductor, Inc. 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com UNI-POLAR BI-POLAR DEVICE MARKING CODE REVERSE STANDOFF VOLTAGE VRWM (V) PEAK PULSE CURRENT IPP (A) REVERSE LEAKAGE @ VRWM IR (µA) BREAKDOWN VOLTAGE VBR (V) MIN. @ IT BREAKDOWN VOLTAGE VBR (V) MAX. @ IT TEST CURRENT (IT) mA MAXIMUM CLAMPING VOLTAGE @IPP VC (V) 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414