Download PDFFT2 TEC
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 5
Technical content
01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays n Telecom/signal relay (dry circuit, test access, ringing) n Slim line 15x7.5mm (.59x.295”) n Switching current 2A n 2 form C bifurcated contacts (2 CO) n High sensitive 24V and 48V coil versions n Meets Telcordia GR 1089, FCC Part 68 and ITU-T K20, ≥ 2500V between coil and contacts Typical applications Communications equipment, linecard application – analog, ISDN, xDSL, PABX, voice over IP , office and business equipment, measurement and control equipment, consumer electronics, set top boxes, HiFi, medical equipment Approvals UL 508 File No. E 111441 Technical data of approved types on request Contact Data Contact arrangement 2 Form C (CO) Max. switching voltage 220VDC, 250VAC Rated current 2A Limiting continuous current 2A Switching power 60W, 62.5VA Contact material PdRu, Au covered Contact style twin contacts Min. recommended contact load 100µV/1µA Initial contact resistance <70mΩ Thermoelectric potential <10µV Operate time typ. 3ms, max. 5ms Release time without diode in parallel typ. 2ms, max. 5ms with diode in parallel typ. 4ms, max. 5ms Bounce time max. typ. 1ms, max. 5ms Electrical endurance at contact application 0 (≤ 30mV/≤10mA) min. 2.5x106 operations cable load open end min. 2.0x106 operations resistive, 24V / 1.25A - 30W min. 1x105 operations resistive, 30VDC / 2A - 60W min. 1x105 operations resistive, 125VDC / 0.24A - 30W min. 1x105 operations Contact ratings, UL contact rating 220VDC, 0.24A, 60W 125VDC, 0.24A, 30W 250VAC, 0.25A, 62.5VA 125VAC, 0.5A, 62.5VA 30VDC, 2A, 60W Mechanical endurance 100x106 operations Coil Data Magnetic system monostable, non polarized Coil voltage range 3 to 48VDC Max. coil temperature 150°C Thermal resistance <125K/W Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDCmin. VDC max. VDC min. Ω±10% mW Standard version, monostable 21 3 2.25 6.80 0.30 45 200 29 4 3.00 9.00 0.40 80 200 22 4.5 3.38 10.10 0.45 101 200 23 5 3.75 11.20 0.50 125 200 24 6 4.50 13.50 0.60 180 200 25 9 6.75 20.30 0.90 405 200 26 12 9.00 27.00 1.20 720 200 27 24 18.00 47.50 2.40 2400 240 28 48 36.00 95.00 4.80 9600 240 High dielectric version, monostable 91 3 2.25 6.80 0.30 45 200 92 4.5 3.38 10.10 0.45 101 200 93 5 3.75 11.20 0.50 125 200 96 12 9.00 27.00 1.20 720 200 97 24 18.00 47.50 2.40 2400 240 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. FT2/FU2 Relay DC current [A] DC voltage [VDC] Max. DC load breaking capacity 108-98004 Rev. F All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 13 Telecom-, Signal and RF Relays FT2/FU2 Relay Coil Operating Range Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 -60 -50 -40 -30 -20 -10 01 02 03 04 05 06 07 08 09 01 0 Unom. nominal coil voltage Uop. min. Urel. min. Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Ambient Temperature [°C] Coil Voltage [U/Unom] 200 mW coil 240 mW coil 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -60- 50 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Unom. nominal coil voltage Uop. min. Urel. min. Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Ambient Temperature [°C] Coil Voltage [U/Unom] 300 mW coil Z
01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays FT2/FU2 Relay (Continued) Insulation standard high dielectric* Initial dielectric strength between open contacts 1000Vrms 1500V rms between contact and coil 1500Vrms 4000V rms between adjacent contacts 1500Vrms 1800V rms Initial surge withstand voltage between open contacts 1500V 2500V between contact and coil 2500V 5000V between adjacent contacts 1500V 2500V Initial insulation resistance between insulated elements >109Ω >10 9Ω Capacitance between open contacts max. 4pF between contact and coil max. 1pF between adjacent contacts max. 1pF Cross talk at 100MHz/900MHz -30.6dB/-13.7dB Insertion loss at 100MHz/900MHz -0.02dB/-0.50dB Voltage standing wave ratio (VSWR) at 100MHz/900MHz 1.02 / 1.27 Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -55°C to +85°C Thermal resistance <125K/W Category of environmental protection IEC 61810 RT III - wash tight Vibration resistance (functional) 10g, 10 to 500Hz Shock resistance (functional), half sinus 11ms 15g Shock resistance (destructive), half sinus 0.5ms 500g Weight max. 3g Resistance to soldering heat THT IEC 60068-2-20 265°C/5s For all High Dielectric Versions (HDV) 260°C/5s Moisture sensitive level, JEDEC J-Std-020D MSL3 related only to SMT and THT-HDV relays packed in orginal dry-packs Ultrasonic cleaning not recommended Packaging/unit THT version tube/50 pcs., box/2000 pcs. SMT short terminals reel/500 pcs.,box/2500 pcs. SMT long terminals reel/400 pcs.,box/2000 pcs. Coil Data (continued) Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDCmin. VDC max. VDC min. Ω±10% mW High dielectric Australia version, monostable 71 3 2.25 5.50 0.30 30 300 73 5 3.75 9.20 0.50 83 300 76 12 9.00 22.10 1.20 480 300 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Umax upper limit of the operative range of the coil voltage (limiting voltage) when coils are continuously energized Uop min lower limit of the operative range of the coil voltage (reliable operate voltage) Urel min lower limit of the operative range of the coil voltage (reliable release voltage) 108-98004 Rev. F All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 13 Telecom-, Signal and RF Relays FT2/FU2 Relay Coil Operating Range Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 -60 -50 -40 -30 -20 -10 01 02 03 04 05 06 07 08 09 01 0 Unom. nominal coil voltage Uop. min. Urel. min. Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Ambient Temperature [°C] Coil Voltage [U/Unom] 200 mW coil 240 mW coil 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -60- 50 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Unom. nominal coil voltage Uop. min. Urel. min. Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Ambient Temperature [°C] Coil Voltage [U/Unom] 300 mW coil PCB layout TOP view on component side of PCB Terminal assignment TOP view on component side of PCB THT version SMT, long terminals SMT, short terminals *this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength enhancement, SF6 is hermetically sealed in relay without leaks to air during normal applica- tion as recommended per the applicable product specification. It is clarified that the usage of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local sales or field engineer for further information and detailed material declaration.
01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays FT2/FU2 Relay (Continued) Dimensions THT version SMT, long terminals SMT, short terminals Processing full line: typical dotted line: process limits external preheating 240°C 180°C 130°C 100°C forced cooling 20 to 40s Time [s] Temperature [°C] Vapour phase soldering temperature/time profile (lead and housing peak temp.) Recommended soldering conditions Vapour phase soldering Time [s] Temperature [°C] Recommended reflow soldering profile Infrared soldering temperature/time profile (lead and housing peak temp.)
01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Reel dimensions THIS DRAWING IS A CONTROLLED DOCUMENT
1 PLC
0 PLC
2 PLC
3 PLC
4 PLC
DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity A A B B 24±0.3 0.6 15.4±0.2 11.9±0.2 9.9±0.2 PS conductivity 10 A-A B-B 2:12:1 1.2+0.2 10.9+0.3 11.5±0.1 max. max. R0.3 max. R0.3 16±0.15 1.5 0.1 2.2±0.2 1.9±0.2 (3.6) 4±0.2 12.1±0.2 max. 3° max. 3° max. 3° (3.6) 4.5±0.2 1.9±0.2 1.5 0.1 1.3±0.2 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm C23303-A079-C119 26.3.2012 -Zdenek Curda -- -mm 26.3.2012-
0.1 Petr Hofman
0.01 - 0.001
0.0001 P2L2/FU2 - Blister tape long terminals-
-- 4:1 C23303-A079-C119 1 1 8 8 - 26.3.2012 ZC PH 7 - 17.06.2011 ZC 9122 1 - 25.05.1998 9188 9151 THIS DRAWING IS A CONTROLLED DOCUMENT DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity A A B B 24±0.3 0.6 15.4±0.2 11.9±0.2 9.9±0.2 PS conductivity 10 A-A B-B 2:12:1 1.2+0.2 10.9+0.3 011.5±0.1 max. max. R0.3 max. R0.3 16±0.15 1.5 0.1 2.2±0.2 1.9±0.2 (3.6) 4±0.2 12.1±0.2 max. 3° max. 3° max. 3° (3.6) 4.5±0.2 1.9±0.2 1.5 0.1 1.3±0.2 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm C23303-A079-C119 26.3.2012 -Zdenek Curda -- -mm 26.3.2012- 0.01 - 0.001 -- 4:1 C23303-A079-C119 1 1 8 8 - 26.3.2012 ZC PH 7 - 17.06.2011 ZC 9122 1 - 25.05.1998 9188 9151 THIS DRAWING IS A CONTROLLED DOCUMENT DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity A A B B 24±0.3 0.6 15.4±0.2 11.9±0.2 9.9±0.2 PS conductivity 10 A-A B-B 2:12:1 1.2+0.2 10.9+0.3 011.5±0.1 max. max. R0.3 max. R0.3 16±0.15 1.5 0.1 2.2±0.2 1.9±0.2 (3.6) 4±0.2 12.1±0.2 max. 3° max. 3° max. 3° (3.6) 4.5±0.2 1.9±0.2 1.5 0.1 1.3±0.2 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm C23303-A079-C119 26.3.2012 -Zdenek Curda -- -mm 26.3.2012- 0.01 - 0.001 -- 4:1 C23303-A079-C119 1 1 8 8 - 26.3.2012 ZC PH 7 - 17.06.2011 ZC 9122 1 - 25.05.1998 9188 9151 THIS DRAWING IS A CONTROLLED DOCUMENT DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity A A B B 24±0.3 0.6 PS conductivity 10 B-B 2:12:1 1.2+0.2 11.5±0.1 12±0.15 1.5 0.1 10.9+0.3 4±0.2 max. R0.3 max. 3° 1.5 0.1 8±0.2 9±0.2 max. R0.3 9.1±0.2 1.3±0.2 2.2±0.2 15.4±0.2 max. (3.6)(3.6) 1.9±0.21.9±0.2 4.5±0.2 max. 3° max. 3° 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm A-A C23303-A079-C120 26.3.2012 -Zdenek Curda -- -mm 26.3.2012- 0.01 - 0.001
0.0001 P2L2/P2L3/FU2 - Blister tape short terminals-
-- 4:1 C23303-A079-C120 1 1 8 8 - 26.3.2012 ZC PH 7 - 13.12.2005 9193 9121 1 - 25.05.1998 9188 9151 THIS DRAWING IS A CONTROLLED DOCUMENT DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity A A B B 24±0.3 0.6 PS conductivity 10 B-B 2:12:1 1.2+0.2 11.5±0.1 12±0.15 1.5 0.1 10.9+0.3 4±0.2 max. R0.3 max. 3° 1.5 0.1 8±0.2 9±0.2 max. R0.3 9.1±0.2 1.3±0.2 2.2±0.2 15.4±0.2 max. (3.6)(3.6) 1.9±0.21.9±0.2 4.5±0.2 max. 3° max. 3° 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm A-A C23303-A079-C120 26.3.2012 -Zdenek Curda -- -mm 26.3.2012- 0.01 - 0.001 -- 4:1 C23303-A079-C120 1 1 8 8 - 26.3.2012 ZC PH 7 - 13.12.2005 9193 9121 1 - 25.05.1998 9188 9151 THIS DRAWING IS A CONTROLLED DOCUMENT DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity A A B B 24±0.3 0.6 PS conductivity 10 B-B 2:12:1 1.2+0.2 11.5±0.1 12±0.15 1.5 0.1 10.9+0.3 4±0.2 max. R0.3 max. 3° 1.5 0.1 8±0.2 9±0.2 max. R0.3 9.1±0.2 1.3±0.2 2.2±0.2 15.4±0.2 max. (3.6)(3.6) 1.9±0.21.9±0.2 4.5±0.2 max. 3° max. 3° 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm A-A C23303-A079-C120 26.3.2012 -Zdenek Curda -- -mm 26.3.2012- 0.01 - 0.001 -- 4:1 C23303-A079-C120 1 1 8 8 - 26.3.2012 ZC PH 7 - 13.12.2005 9193 9121 1 - 25.05.1998 9188 9151 NEW Packing NEW Tape and reel for SMT version with long terminals Tape and reel for SMT version with long terminals Signal Relays FT2/FU2 Relay (Continued)
01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays FT2/FU2 Relay (Continued) Product code structure Typical product code D34 02 Type D34 Signal Relays FT2 (THT) D35 Signal Relays FU2 (SMT) 2 form C, 2 CO Coil Coil code: please refer to coil versions table Performance and coil type 2x Standard version, monostable 9x High dielectric version, monostable 7x High dielectric, Australia version, monostable (SMT version only) Terminals Blank THT, Standard packaging L THT, dry-pack (on request) N SMT, short pins W SMT, long pins Product code Arrangement Perf. type Coil type Coil Terminals Part Number D3421 2 form C (2 CO) Standard Monostable 3VDC THT 1462035-9 D3423 5VDC 1-1462035-1 D3426 12VDC 1-1462035-4 D3427 24VDC 1-1462035-7 D3523N 2 form C (2 CO) Standard Monostable 5VDC SMT short 2-1462036-1 D3527N 24VDC 2-1462036-9 D3528N 48VDC 9-1462036-3 D3521W 2 form C (2 CO) Standard Monostable 3VDC SMT long 1-1462036-8 D3522W 4.5VDC 2-1462036-0 D3523W 5VDC 2-1462036-2 D3526W 12VDC 2-1462036-8 D3527W 24VDC 9-1462036-1 D3491 2 form C (2 CO) High dielectric Monostable 3V THT 2-1462035-0 D3492 4.5VDC 2-1462035-1 D3493 5V 1-1462035-5 D3496 12VDC 2-1462035-4 D3497 24VDC 2-1462035-5 D3491L 3VDC 2-1462035-7 D3491L 2 form C (2 CO) High dielectric special Monostable 3VDC THT 3-1462035-0 Other types on request This list represents the most common types and does not show all variants covered by this data sheet.