V23134J52D642 TE-CONNECTIVITY

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

03-2020, Rev.0320 www.te.com © 2020TE Connectivity. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog, product data, ‘Definitions’ section, application notes and all specifications are subject to change. ■ Pin assignment similar to ISO 7588 part 1 ■ Customized versions on request – 24VDC versions with contact gap >0.8mm – Integrated components (e.g. resistor, diode) – Customized marking/color – Special covers (e.g. notches, release features, brackets) Typical applications Cross carline up to 70A for example: ABS control, cooling fan, energy management, engine control, glow plug, heated front screen, ignition, lamps: front, rear, fog light, main switch/supply relay. Contact Data Contact arrangement 1 form A, 1 form A, 1 form A,

1 NO 1 NO 1 NO

Contact gap – – >0.8mm Rated voltage 12VDC 24VDC 24VDC1) Limiting continuous current 23°C 70A 70A 70A 85°C 50A 50A 50A 125°C 30A 30A 30A Limiting making current2) 240A 240A 240A Limiting breaking current 70A 25A 40A Limiting short-time current overload current, ISO 8820-33) 1.35 x 50A, 1800s 2.00 x 50A, 5s 3.50 x 50A, 0.5s 6.00 x 50A, 0.2s Jump start test, ISO 16750-1 24VDC for 5min, conducting nominal current at 23°C Contact material Silver based Min. recommended contact load4) 1A at 5VDC Initial voltage drop, form A (NO) contact at 10A, typ./max. 10/300mV Frequency of operation at nominal load 6 ops./min (0.1Hz) Operate/release time typ. 7/2ms5) Electrical endurance6) resistive load at 14VDC >1x105 ops. – – 70A >2x105 ops. – – 50A resistive load at 28VDC – >1x105ops. >1x10 5 ops. 25A 40A Power Relay F7 Automotive Relays Plug-in Maxi ISO Relays F134J_a_bw Contact Data (continued) Mechanical endurance >1x106ops. 1) Special high performance 24VDC version with contact gap >0.8mm. 2) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of maximum 3s for a make/break ratio of 1:10. 3) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 5) For unsuppressed relay coil. Any parallel device to the coil will increase the release time. 6) Electrical endurance data is not valid for diode versions. Any diode or pn-junction parallel to the coil (internal or external) will significantly decrease the electrical lifetime, especially when used for inductive loads. Coil Data Rated coil voltage 12VDC, 24VDC Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance7) power 7) VDC VDC VDC Ω±10% W 052 12 7.2 1.6 90 1.6 053 24 14.4 3.2 324 1.8 056 24 16.0 4.0 268 2.1 065 24 14.4 2.4 288 2.0 165 24 16.0 4.0 288 2.0 7) Without components in parallel. All figures are given for coil without pre-energization, at ambient temperature +23°C. Does not take into account the temperature rise due to the contact current E = pre-energization TEVF4_OVR1 Does not take into account the temperature rise due to the contact current E = pre-energization. Coil operating range ECR0629-N Load limit curve: safe shutdown, no stationary arc/make contact. Load limit curve measured with low inductive resistors verified for 1000 switching events. Max. DC load breaking capacity

03-2020, Rev. 0320 www.te.com © 2020 TE Connectivity. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. Automotive Relays Plug-in Maxi ISO Relays Power Relay F7 (Continued) Insulation Data Initial dielectric strength between open contacts 500Vrms between contact and coil 500Vrms between adjacent contacts 500Vrms Load dump test ISO 7637-1 (12VDC), test pulse 5 Vs=+86.5VDC ISO 7637-2 (24VDC), test pulse 5 Vs=+200VDC Other Data EU RoHS/ELV compliance compliant Protection to heat and fire according UL-94 HB or better8) Ambient temperature -40 to 125°C Climatic cycling with condensation EN ISO 6988 6 cycles, storage 8/16h Temperature cycling, IEC 60068-2-14, Nb 10 cycles, -40/+85°C (5°C/min) Damp heat cyclic, IEC 60068-2-30, Db, Variant 1 6 cycles, upper air temp. 55°C Damp heat constant, IEC 60068-2-3, Ca 56 days Category of environmental protection, IEC 61810 RTI – dustproof Degree of protection, IEC 60529 IP54 (dustproof) Corrosive gas IEC 60068-2-42 10±2cm3/m3 SO2, 10 days IEC 60068-2-43 1±0.3cm3/m3 H2S, 10 days Vibration resistance (functional) IEC 60068-2-6 (sine sweep) 10 to 500Hz, min. 5g8) Other Data (continued) Shock resistance (functional) IEC 60068-2-27 (half sine) 6ms, min. 30g.9) Drop test, free fall IEC 60068-2-32 1m onto concrete Terminal type plug-in, QC/ PCB Cover retention pull force 150N push force 200N Terminal retention pull force 150N push force 150N resistance to bending 10N10) force applied to side 10N10) torque 0.3Nm Weight approx. 38g (1.3oz) Resistance to soldering heat THT IEC 60068-2-20 260°C, 10s Packaging unit plug-in: 210 pcs. plug-in with bracket: 208 pcs. PCB 315 pcs. 08) Refers to used materials. 09) No change in the switching state >10μs. Valid for NC contacts, NO contact values significantly higher. 10) Values apply 2mm from the end of the terminal. When the force is removed, the terminal must not have moved by more than 0.3mm. Accessories For details see datasheet Connectors for Maxi ISO Relays NO 1 form A, NO 3086 NOR 1 form A, NO with resistor 3086 NOD 1 form A, NO with diode 3086 Terminal Assignment Quick connect terminal similar to ISO 8092- 1 24.9 ±0.3 16 ±0.5 6 ±0.4 15 ±0.1 4 ±0.2 17 +1/-0.5 11 ±0.5 0.8 ±0.05 ø 1.7 +0. 2 1.2 ±0.059.5 ±0.1 6.3 ±0.1 25.9 ±0.3 25.9 ±0.3 5.3 ±0.1 TE1098-Y1 0.3 Measurement reference plane Dimensions Power Relay F7 with quick connect terminals similar to ISO 8092-1 View of the terminals (bottom view) TE1103-411

03-2020, Rev.0320 www.te.com © 2020TE Connectivity. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog, product data, ‘Definitions’ section, application notes and all specifications are subject to change. Automotive Relays Plug-in Maxi ISO Relays Power Relay F7 (Continued) Product code structure Typical product code V23134 -J 0 052 -D642 Type V23134 Power Relay F Contact arrangement J 1 form A, 1 NO Cover

0 Standard 1 Bracket at terminal 30 ISO

2 Bracket near terminal 86 ISO

052 12VDC 053 24VDC 056 24VDC 165 24VDC 065 24VDC Terminal/arrangement D642 Plug-in/NO Xnnn Customized (nnn: version number) Production in Europe (only) Product code Arrangement Cover Coil suppr. Circuit1) Coil Contact mat. Terminals Part number V23134-J0052-D642 1 form A, 1 NO Standard NO 12VDC Silver based Plug-in, QC 7-1393303-3 V23134-J0052-X429 Resistor 680Ω NOR 1-1414147-0 V23134-J0052-X439 Diode (cathode 86) NOD 1-1414286-0 V23134-J0052-X455 Resistor 470Ω NOR PCB 1-1414610-0 V23134-J0052-X511 NO 3-1415001-2 V23134-J0052-X4613) Resistor 560Ω NOR Plug-in, QC 1-1414469-0 V23134-J0053-D642 NO 24VDC 9-1393303-7 V23134-J0065-X4974) PCB 3-1414937-3 V23134-J0165-X5372)3) Resistor 1200Ω NOR Plug-in, QC 3-1904117-4 V23134-J1052-D642 Bracket NO 12VDC 0-1393304-9 V23134-J1052-X281 Resistor 560Ω NOR 1-1393304-0 V23134-J1053-D642 NO 24VDC 1-1393304-1 V23134-J2165-X5382)3) Resistor 1200Ω NOR 3-1904117-5 1) See terminal assignment diagrams. 3) Special feature: 14.5mm load terminals. 2) Special feature: contact gap >0.8mm. 4) Packed in tray with 300 pcs. per unit. Other types on request. This list represents the most common types and does not show all variants covered by this datasheet. 26.2 MAX. 3.0 1.5 25.2 MAX. 26.2 MAX. 3.8 TIN PLATED 2.786 TE2104-H1 26.2 MAX. 3.0 1.5 25.2 MAX. 26.2 MAX. 3.8 TIN PLATED 2.786 TE2104-H1View of the terminals (bottom view) Mounting hole layout (bottom view) 17.9 8.4 2x Ø 1.93 17.0 3.8 8.5 3.8 6x Ø 2.18 3.8 3.8 TE2105-Q2 Dimensions (continued) Power Relay F7 with PCB terminals Production in Asia (only) Product code Arrangement Cover Coil suppr. Circuit1) Coil Contact mat. Terminals Part number V23134-J0052-D642 1 form A, 1 NO Standard NO 12VDC Silver based Plug-in, QC 7-1904094-7 V23134-J0052-X429 Resistor 680Ω NOR 7-1904094-8 V23134-J0052-X439 Diode (cathode 86) NOD 7-1904094-9 V23134-J0052-X4613) Resistor 560Ω NOR 8-1904094-0 V23134-J0053-D642 NO 24VDC 8-1904094-3 V23134-J0056-X4082)3) Resistor 1200Ω NOR 8-1904094-4 1) See terminal assignment diagrams. 3) Special feature: 14.5mm load terminals. 2) Special feature: contact gap >0.8mm. Other types on request. This list represents the most common types and does not show all variants covered by this datasheet.