2SK3878_V01 TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 6
Technical content
TOSHIBA Field Effect Transistor Silicon N-Channel MOS Type (π- MOSIV) 2SK3878 Switching Regulator Applications
- Low drain-source ON-resistance: R DS (ON) = 1.0 Ω (typ.)
- High forward transfer admittance: ⎪Yfs⎪ = 7.0 S (typ.)
- Low leakage current: I DSS = 100 μA (max) (VDS = 720 V)
- Enhancement model: V th = 2.0 to 4.0 V (VDS = 10 V, ID = 1 mA) Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Drain-source voltage VDSS 900 V Drain-gate voltage (RGS = 20 kΩ) V DGR 900 V Gate-source voltage VGSS ±30 V DC (Note 1) I D 9 Drain current Pulse (Note 1) I DP 27 A Drain power dissipation (Tc = 25°C) P D 150 W Single pulse avalanche energy (Note 2) EAS 778 mJ Avalanche current IAR 9 A Repetitive avalanche energy (Note 3) E AR 15 mJ Channel temperature Tch 150 °C Storage temperature range Tstg −55 to 150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics Characteristic Symbol Max Unit Thermal resistance, channel to case R th (ch-c) 0.833 °C/W Thermal resistance, channel to ambient R th (ch-a) 50 °C/W Note 1: Ensure that the channel temperature does not exceed 150°C during use of the device. Note 2: V DD = 90 V, Tch = 25°C, L = 17.6 mH, RG = 25 Ω, IAR = 9 A Note 3: Repetitive rating: pulse width limited by max junction temperature This transistor is an electrostatic-sensitive device. Handle with care. Unit: mm 1. GATE 2. DRAIN (HEATSINK) 3. SOURCE JEDEC ― JEITA SC-65 TOSHIBA 2 −16C1B Weight: 4.6 g (typ.) Start of commercial production 2008-10
Electrical Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Gate leakage current IGSS V GS = ±30 V, VDS = 0 V ⎯ ⎯ ±10 μA Gate-source breakdown voltage V (BR) GSS IG = ±10 μA, VDS = 0 V ±30 ⎯ ⎯ V Drain cutoff current IDSS V DS = 720 V, VGS = 0 V ⎯ ⎯ 100 μA Drain-source breakdown voltage V (BR) DSS ID = 10 mA, VGS = 0 V 900 ⎯ ⎯ V Gate threshold voltage Vth V DS = 10 V, ID = 1 mA 2.0 ⎯ 4.0 V Drain-source ON resistance RDS (ON) V GS = 10 V, ID = 4 A ⎯ 1.0 1.3 Ω Forward transfer admittance ⎪Yfs⎪ V DS = 15 V, ID = 4 A 3.5 7.0 ⎯ S Input capacitance Ciss ⎯ 2200 ⎯ Reverse transfer capacitance Crss ⎯ 45 ⎯ Output capacitance Coss VDS = 25 V, VGS = 0 V, f = 1 MHz ⎯ 190 ⎯ pF Rise time tr ⎯ 25 ⎯ Turn-on time ton ⎯ 65 ⎯ Fall time tf ⎯ 20 ⎯ Switching time Turn-off time t off ⎯ 120 ⎯ ns Total gate charge (gate-source plus gate-drain) Qg ⎯ 60 ⎯ Gate-source charge Qgs ⎯ 34 ⎯ Gate-drain (“Miller”) charge Qgd VDD ≈ 400 V, VGS = 10 V, ID = 9 A ⎯ 26 ⎯ nC Source-Drain Ratings and Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Continuous drain reverse current (Note 1) I DR ⎯ ⎯ ⎯ 9 A Pulse drain reverse current (Note 1) I DRP ⎯ ⎯ ⎯ 27 A Forward voltage (diode) VDSF I DR = 9 A, VGS = 0 V ⎯ ⎯ −1.7 V Reverse recovery time trr ⎯ 1.4 ⎯ μs Reverse recovery charge Qrr IDR = 9 A, VGS = 0 V, dIDR/dt = 100 A/μs ⎯ 16 ⎯ μC Marking Duty ≤ 1%, tw = 10 μs 0 V
10 VVGS
RL = 100 Ω VDD ≈ 400 V ID = 4 A VOUT 4.7 Ω K3878 TOSHIBA Lot No. Note 4 Part No. (or abbreviation code) Note 4: A line under a Lot No. identifies the indication of product Labels. Not underlined: [[Pb]]/INCLUDES > MCV Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]] Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. The RoHS is the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
FORWARD TRANSFER ADMITTANCE ⎪Yfs⎪ (S) DRAIN−SOURCE VOLTAGE V DS ( V ) ID – VDS DRAIN CURRENT I D (A) DRAIN−SOURCE VOLTAGE V DS ( V ) ID – VDS DRAIN CURRENT I D (A) GATE−SOURCE VOLTAGE V GS ( V ) ID – VGS DRAIN CURRENT I D (A) DRAIN CURRENT I D (A) ⎪Yfs⎪ − ID DRAIN CURRENT I D (A) RDS (ON) − ID DRAIN−SOURCE ON-RESISTANCE RDS (ON) ( Ω) 2 0 104 6 8 COMMON SOURCE Tc = 25°C PULSE TEST VGS = 4.5 V 5.25 4.75 1 10 0.1 COMMON SOURCE Tc = 25°C PULSE TEST VGS = 10 V 100 40 208 12 16 COMMON SOURCE VDS = 20 V PULSE TEST 2 0 104 6 8 Tc = −55°C 100 0.1 100 10 Tc = −55°C 100 100 5.5 5.5 VGS = 4.5 V COMMON SOURCE Tc = 25°C PULSE TEST COMMON SOURCE VDS = 20 V PULSE TEST DRAIN−SOURCE VOLTAGE V DS ( V ) GATE−SOURCE VOLTAGE V GS ( V ) VDS – VGS 04 208 12 16 2.3 COMMON SOURCE Tc = 25°C PULSE TEST 4.5 ID = 9 A
CASE TEMPERATURE Tc (°C) GATE THRESHOLD VOLTAGE V th (V) DRAIN−SOURCE VOLTAGE V DS ( V ) IDR − VDS DRAIN REVERSE CURRENT I DR ( A ) DRAIN−SOURCE VOLTAGE V DS ( V ) C − VDS CAPACITANCE C (pF) Vth − Tc 0.1 100 VGS = 0 V COMMON SOURCE Tc = 25°C PULSE TEST −80 0 40 80 120 160−40 COMMON SOURCE VDS = 10 V ID = 1 mA PULSE TEST 10000 1 0.1 100 10 1000 100 GATE−SOURCE VOLTAGE V GS ( V ) DYNAMIC INPUT/OUTPUT CHARACTERISTICS TOTAL GATE CHARGE Q g (nC) DRAIN−SOURCE VOLTAGE V DS ( V ) 500 100 300 400 VDD = 400 V 100 VGS VDS COMMON SOURCE ID = 9 A Tc = 25°C PULSE TEST 40 60 80 100 20 200 200 8 Ciss Coss Crss COMMON SOURCE VGS = 0 V f = 1 MHz Tc = 25°C DRAIN POWER DISSIPATION P D ( W ) CASE TEMPERATURE Tc (°C) PD − Tc 200 120 160 0 80 120 20040 160 CASE TEMPERATURE Tc (°C) RDS (ON) − Tc DRAIN−SOURCE ON-RESISTANCE RDS (ON) ( Ω) −40 −80 1600 40 80 COMMON SOURCE VGS = 10 V PULSE TEST 2.3 4.5 120 ID = 9 A
10 μ 100 μ 1 m 10 m 100 m 1 10 0.001 0.01 0.1 T PDM t Duty = t/T Rth (ch-c) = 0.833°C/W SINGLE PULSE Duty = 0.5 0.2 0.1 0.05 0.02 0.01 rth − tw PULSE WIDTH t w ( s ) NORMALIZED TRANSIENT THERMAL IMPEDANCE r th (t)/Rth (ch-c) −15 V 15 V TEST CIRCUIT WAVEFORM IAR BVDSS VDD V DS RG = 25 Ω VDD = 90 V, L = 17.6 mH ⎟⎟ −⋅ ⋅ ⋅ = VDDBVDSS BVDSS2I L2 1ΕAS SAFE OPERATING AREA DRAIN−SOURCE VOLTAGE V DS ( V ) DRAIN CURRENT I D (A) 100 10 100 10000 VDSS max 0.1 DC OPERATION Tc = 25°C 1 ms * ID max (CONTINUOUS) ID max (PULSE) * 0.01 100 μs * 1000 EAS – Tch CHANNEL TEMPERATURE (INITIAL) T ch (°C) AVALANCHE ENERGY E AS (mJ) 200 400 600 1000 800 50 75 100 125 150 * SINGLE NONPETITIVE PULSE Tc = 25°C Curves must be derated linearly with increase in temperature.
RESTRICTIONS ON PRODUCT USE
- Toshiba Corporation, and its subsidiaries and affiliates (collect ively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice.
- This document and any information herein may not be reproduc ed without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
- Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
- PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative.
- Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
- Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.
- The information contained herein is pres ented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
- ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
- Do not use or otherwise make available Product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
- Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Pro duct. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.