2SK3857TK TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 5
Technical content
TOSHIBA Field Effect Transistor Silicon N Channel Junction Type 2SK3857TK For ECM
- Application for Ultra-compact ECM Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Gate-Drain voltage VGDO -20 V Gate Current IG 10 mA Drain power dissipation (Ta = 25°C) P D 100 mW Junction Temperature Tj 125 °C Storage temperature range Tstg −55~125 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). IDSS CLASSIFICATION A-Rank 140~240µA B-Rank 210~350µA M a r k i n g E q u i v a l e n t C i r c u i t Unit: mm JEDEC - JEITA - TOSHIBA 2-1R1A Weight: 2.2mg (typ.) TESM3 1.Drain 2.Source 3.Gate D G S IDSS Classification Symbol A :A - Rank B :B - Rank Type Name 1.4±0.05 0.32±0.05 0.45 0.22±0.050.8±0.05 0.9±0.1 1.2±0.05 0.395±0.03 0.1±0.05 0.45
Electrical Characteristics (Ta=25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Drain Current IDSS V DS = 2 V, VGS = 0 140 ⎯ 350 µA Drain Current ID V DD = 2 V, RL= 2.2kΩ,Cg = 5pF ⎯ ⎯ 370 µA Gate-Source Cut-off Voltage V GS(OFF) V DS = 2 V, ID = 1μA -0.1 ⎯ -1.0 V Forward transfer admittance |Y fs| V DS = 2 V,VGS = 0V 0.9 1.3 ⎯ mS Gate-Drain Voltage V (BR)GDO IG=-10 μA -20 ⎯ ⎯ V Input capacitance Ciss V DS = 2 V, VGS = 0, f = 1 MHz ⎯ 3.5 ⎯ pF Voltage Gain Gv V DD = 2V, RL= 2.2kΩ,Cg = 5pF, f = 1kHz,vin=100mV -3.0 -0.5 ⎯ dB Delta Voltage Gain DGv(f) V DD = 2V, RL= 2.2kΩ,Cg = 5pF,f = 1kHz to 100Hz,vin=100mV ⎯ 0 -1 dB Delta Voltage Gain DGv(V) V DD = 2V to 1.5V, RL= 2.2kΩ,Cg = 5pF,f = 1kHz, vin=100mV ⎯ -0.8 -2 dB Noise Voltage VN V DD = 2V, RL= 1kΩ,Cg = 10pF,Gv=80dB, A-Curve Filter ⎯ 25 55 mV Total Harmonic Distortion THD V DD = 2V, RL= 2.2kΩ,Cg = 5pF, f = 1kHz, vin=50mV ⎯ 0.7 ⎯ % Time Output Stability tos V DD = 2V, RL= 2.2kΩ,Cg = 5pF ⎯ 100 200 ms Time Output Stability Test Method a) TEST CIRCUIT b ) T E S T S I G N A L VDD=2.0V 5pF 2.2kΩ Vout tos 90% VDD-ID*RL 50% VDD Vout
IDSS=150μA IDSS=330μA Ta=85℃ Ta=25℃ Ta=-40℃ Gate - Source voltage V GS (V) ID – VGS Drain Current I D ( µ A ) Drain Current I DSS ( µ A ) |Yfs| – IDSS Forward transfer admittance | Y fs| (mS) 400 500 Gate-Source Cut-off Voltage VGS(OFF) ( V ) Drain Current I DSS ( µ A ) VGS(OFF) – IDSS Gate - Source voltage V GS (V) ID – VGS Drain Current I D ( µ A ) 600 300 100 200 400 500 VDS=2V Common Source Ta = 25 °C 600 300 100 200 400 500 VDS=2V Common Source 100 200 300 600 |Yfs|:VDS=2V VGS=0V IDSS: VDS=2V VGS=0V Common Source Ta = 25 °C 400 500 0 -100 -200 -300 -400 100 200 300 600 400 500 VGS(OFF):VDS=2V ID = 1μA IDSS:VDS=2V VGS=0V Common Source Ta = 25 °C -500 Drain - Source voltage V DS (V) ID – VDS Drain Current I D ( µ A ) 600 300 100 200 2.0 400 500 1.0 Common Source Ta = 25 °C IDSS=170μA VGS = 0 V – 0.05 V + 0.1 V + 0.05 V – 0.1 V Drain - Source voltage V DS (V) ID – VDS Drain Current I D ( µ A ) 600 300 100 200 2.0 400 500 1.0 Common Source Ta = 25 °C IDSS=330μA VGS = 0 V – 0.05 V + 0.1 V + 0.05 V – 0.1 V
Drain Current I DSS ( µ A ) VN – IDSS Noise Voltage VN (mV) Drain Current I DSS ( µ A ) DGv(V)– IDSS Delta Voltage Gain DGv(V) (dB) Voltage Gain Gv (dB) Drain Current I DSS ( µ A ) Gv– IDSS Drain - Source voltage V DS (V) Ciss – VDS Input capacitance C iss (pF) 1 10 VGS=0V f=1kHz Common Source Ta = 25°C – 2 100 200 300 600 400 500 Gv:VDD=2V Cg=5pF RL= 2.2kΩ, f=1kHz vin=100mV IDSS: VDS=2V VGS=0V Common Source Ta = 25°C -1.0 -1.5 -2.5 -0.5 -2.0 -3.0 100 200 300 600 400 500 DGv:VDD=2V to 1.5V Cg=5pF RL= 2.2kΩ, f=1kHz vin=100mV IDSS: VDS=2V VGS=0V Common Source Ta = 25°C Electret Capacitance Cg (pF) Gv – Cg Voltage Gain Gv (dB) 0 2 4 6 8 10 -20 -15 -10 VDD=2V Cg=5pF RL= 2.2kΩ, f=1kHz vin=100mV Common Source Ta = 25°C IDSS=350μA IDSS=170μA 0 100 200 300 600 400 500 VN:VDD=2V Cg=10pF RL= 1kΩ f=1kHz 80dB AMP A-Curve Filter IDSS: VDS=2V VGS=0V Drain Current I DSS ( µ A ) THD– IDSS Total Harmonic Distortion THD (%) 0.5 1.0 1.5 2.0 100 200 300 600 400 500 0 THD:VDD=2V Cg=5pF RL= 2.2kΩ f=1kHz vin=50mV IDSS: VDS=2V VGS=0V Common Source Ta = 25°C Common Source Ta = 25°C
RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL
- The information contained herein is subject to change without notice.
- TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
- The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
- The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
- The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
- Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.