2SK3476_07 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

TOSHIBA Field Effect Transistor Silicon N Channel MOS Type 2SK3476 VHF- and UHF-band Amplifier Applications (Note)The TOSHIBA products listed in this document are intended for high frequency Power Amplifier of telecommunications equipment.These TOSHIBA products are neither in tended nor warranted for any other use.Do not use these TOSHIBA products listed in this document except for high frequency Power Amplifier of telecommunications equipment.

  • Output power: P O = 7.0 W (min)
  • Gain: GP = 11.4dB (min)
  • Drain efficiency: ηD = 60% (min) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Drain-source voltage VDSS 20 V Gain-source voltage VGSS 10 V Drain current ID 3 A Power dissipation PD (Note 1) 20 W Channel temperature Tch 150 °C Storage temperature range Tstg −45~150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Tc = 25°C (When mounted on a 1.6 mm glass epoxy PCB) Marking Caution Please take care to avoid generating static electricity when handling this transistor. Unit: mm JEDEC ― JEITA ― TOSHIBA 2-5N1A Weight: 0.08 g (typ.) Type name UC F 1. Gate 2. Source (heat sink) 3. Drain Lo No. Dot

Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Drain cut-off current IDSS V DS = 20 V, VGS = 0 V ⎯ ⎯ 5 μA Gate-source leakage current IGSS V GS = 5 V ⎯ ⎯ 5 μA Threshold voltage Vth V DS = 7.2 V, ID = 2 mA 0.55 1.05 1.55 V Drain-source on-voltage VDS (ON) V GS = 10 V, ID = 75 mA ⎯ 18 ⎯ mV Forward transconductance Yfs V DS = 7.2 V, IDS = 1 A ⎯ 1 ⎯ S Input capacitance Ciss V DS = 7.2 V, VGS = 0 V, f = 1 MHz ⎯ 53 ⎯ pF Output capacitance Coss V DS = 7.2 V, VGS = 0 V, f = 1 MHz ⎯ 49 ⎯ pF Output power PO 7 ⎯ ⎯ W Drain efficiency ηD 60 ⎯ ⎯ % Power gain GP VDS = 7.2 V, Iidle = 500 mA (VGS = adjust), f = 520 MHz, Pi = 500 mW, 11.4 ⎯ ⎯ dB Low voltage output power POL VDS = 6.0 V, Iidle = 500 mA (VGS = adjust), f = 520 MHz, Pi = 500 mW, 5 ⎯ ⎯ W Load mismatch ⎯ VDS = 10 V, PO = 7 W, VGS = adjust, Pi = adjust, f = 520 MHz, VSWR LOAD 20:1 all phase No degradation Note 1: These characteristic values are measured using measurement tools specified by Toshiba. Output Power Test Fixture (Test Condition: f = 520 MHz, VDS = 7.2 V, Iidle = 500 mA, Pi = 500 mW) Pi PO C1 C2 ZG = 50 Ω C12 C13 R2 C14 C15 VGS V DS C10 ZL = 50 Ω C1: 15 pF C2: 11 pF C3: 9 pF C4: 30 pF C5: 30 pF C6: 11 pF C7: 8 pF C8: 9 pF C9: 2200 pF C10: 2200 pF C11: 2200 pF C12: 10000 pF C13: 10 μF C14: 10000 pF C15: 10 μF L1: φ0.6 mm enamel wire, 5.8ID, 4T L2: φ0.6 mm enamel wire, 5.8ID, 8T R1: 2.2 Ω R2: 1.5 kΩ R1C11 C5 C6 C7 C8

Note 2: These are only typical curves and devices are not necessarily guaranteed at these curves. 1000400 100 200 600 800 f = 520 MHz VDS = 7.2 V Iidle = 500 mA Tc = 100°C 25°C −20°C 60°C 1000400 200 600 800 f = 520 MHz VDS = 7.2 V Iidle = 500 mA Tc = 100°C 60°C −20°C 25°C Output power P O (W) Drain efficiency ηD ( % ) Input power P i ( m W ) PO – Pi Output power P O (W) Input power P i ( m W ) PO – Pi Output power P O (W) Input power P i ( m W ) ηD – Pi Drain efficiency ηD ( % ) Input power P i ( m W ) ηD – Pi Input power P i ( m W ) PO – Pi Input power P i ( m W ) ηD – Pi Drain efficiency ηD ( % ) 1000400 200 600 800 f = 520 MHz VDS = 7.2 V Tc = 25°C Iidle = 300 mA 700 mA 500 mA 1000400 200 600 800 f = 520 MHz Iidle = 500 mA Tc = 25°C VDS = 6.0 V 7.2 V 9.6 V 1000400 100 200 600 800 f = 520 MHz VDS = 7.2 V Tc = 25°C Iidle = 300 mA 500 mA 700 mA 1000400 100 200 600 800 f = 520 MHz Iidle = 500 mA Tc = 25°C VDS = 6.0 V 7.2 V 9.6 V

RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity a nd vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.