2SK3442_06 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

TOSHIBA Field Effect Transistor Silicon N Chann el MOS Type (U-MOSII) 2SK3442 Switching Regulator, DC-DC Converter and Motor Drive Applications

  • Low drain-source ON resistance: RDS (ON) = 15 mΩ (typ.)
  • High forward transfer admittance: ⎪Yfs⎪ = 28 S (typ.)
  • Low leakage current: IDSS = 100 μA (VDS = 100 V)
  • Enhancement mode: Vth = 2.0~4.0 V (VDS = 10 V, ID = 1 mA) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Drain-source voltage VDSS 100 V Drain-gate voltage (RGS = 20 kΩ) V DGR 100 V Gate-source voltage VGSS ±30 V DC (Note 1) I D 45 Drain current Pulse (Note 1) I DP 180 A Drain power dissipation (Tc = 25°C) P D 125 W Single pulse avalanche energy (Note 2) EAS 468 mJ Avalanche current IAR 45 A Repetitive avalanche energy (Note 3) E AR 12.5 mJ Channel temperature Tch 150 °C Storage temperature range Tstg −55~150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics Characteristics Symbol Max Unit Thermal resistance, channel to case R th (ch-c) 1.00 °C/W Note 1: Ensure that the channel temperature does not exceed 150°C. Note 2 V DD = 25 V, Tch = 25°C (initial), L = 373 μH, RG = 25 Ω, IAR = 45 A Note 3: Repetitive rating: pulse width limited by maximum channel temperature This transistor is an electrostatic-sensitive device. Please handle with caution. Unit: mm JEDEC ― JEITA SC-97 TOSHIBA 2-9F1B Weight: 0.74 g (typ.) Notice: Please use the S1 pin for gate input signal return. Make sure that the main current flows into the S2 pin.

Electrical Characteristics (Note 4) (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Gate leakage current IGSS V GS = ±25 V, VDS = 0 V ⎯ ⎯ ±10 μA Drain cut-off current IDSS V DS = 100 V, VGS = 0 V ⎯ ⎯ 100 μA Drain-source breakdown voltage V (BR) DSS ID = 10 mA, VGS = 0 V 100 ⎯ ⎯ V Gate threshold voltage Vth V DS = 10 V, ID = 1 mA 2.0 ⎯ 4.0 V Drain-source ON resistance RDS (ON) V GS = 10 V, ID = 23 A ⎯ 15 20 m Ω Forward transfer admittance ⎪Yfs⎪ V DS = 10 V, ID = 23 A 14 28 ⎯ S Input capacitance Ciss ⎯ 4100 ⎯ Reverse transfer capacitance Crss ⎯ 340 ⎯ Output capacitance Coss VDS = 10 V, VGS = 0 V, f = 1 MHz ⎯ 980 ⎯ pF Rise time tr ⎯ 15 ⎯ Turn-on time ton ⎯ 45 ⎯ Fall time tf ⎯ 20 ⎯ Switching time Turn-off time toff ⎯ 95 ⎯ ns Total gate charge (gate-source plus gate-drain) Qg ⎯ 85 ⎯ Gate-source charge Qgs ⎯ 50 ⎯ Gate-drain (“miller”) charge Qgd VDD ∼ − 80 V, VGS = 10 V, ID = 45 A ⎯ 35 ⎯ nC Note 4: Connect the S1 and S2 pins together, and gr ound them except during switching time measurement. Source-Drain Ratings and Characteristics (Note 5) (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Continuous drain reverse current (Note 1, Note 5) IDR1 ⎯ ⎯ ⎯ 45 A Pulse drain reverse current (Note 1, Note 5) IDRP1 ⎯ ⎯ ⎯ 180 A Continuous drain reverse current (Note 1, Note 5) I DR2 ⎯ ⎯ ⎯ 1 A Pulse drain reverse current (Note 1, Note 5) IDRP2 ⎯ ⎯ ⎯ 4 A Forward voltage (diode) VDS2F I DR = 45 A, VGS = 0 V ⎯ ⎯ −1.5 V Reverse recovery time trr ⎯ 160 ⎯ ns Reverse recovery charge Qrr IDR = 45 A, VGS = 0 V, dIDR/dt = 50 A/μs ⎯ 512 ⎯ nC Note 5: I DR1, IDRP1: Current flowing between the drain and the S2 pin. Ensure that the S1 pin is left open. IDR2, IDRP2: Current flowing between the drain and the S1 pin. Ensure that the S2 pin is left open. Unless otherwise specified, connect the S1 and S2 pins together, and ground them. K3442 Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. Part No. (or abbreviation code) Duty < = 1%, tw = 10 μs 0 V

10 VVGS

RL = 2.2 Ω VDD ∼ − 50 V ID = 23 A VOUT 4.7 Ω

Forward transfer admittance ⎪Yfs⎪ (S) Drain-source voltage V DS (V) Drain-source voltage V DS (V) ID – VDS Drain current I D (A) Drain-source voltage V DS (V) ID – VDS Drain current I D (A) Gate-source voltage V GS (V) ID – VGS Drain current I D (A) Gate-source voltage V GS (V) VDS – VGS Drain current I D (A) ⎪Yfs⎪ – ID Drain current I D (A) RDS (ON) – ID Drain-source on resistance RDS (ON) ( m Ω) 100 VGS = 6 V Common source Tc = 25°C Pulse test 6.5 710 15 8 048 1 6 12 20 Common source Tc = 25°C Pulse test ID = 45 A 500 100 0.1 1 10 100 Common source VDS = 10 V Pulse test −55 Tc = 100°C 30 50 35 0.3 0.5 300 0 4 8 16 12 20 −55 Common source VDS = 10 V Pulse test Tc = 100°C 100 200 160 120 0 4 8 12 16 20 VGS = 6 V Common source Tc = 25°C Pulse test 6.5 7.5 500 100 1 10 100 1000 Common source Tc = 25°C Pulse test 300 500 30 50 35 VGS = 10 V 300

Drain power dissipation P D (W) Gate threshold voltage V th (V) Case temperature Tc (°C) RDS (ON) – Tc Drain-source on resistance R DS (ON) ( m Ω) Drain-source voltage V DS (V) IDR – VDS Drain reverse current I DR (A) Drain-source voltage V DS (V) Capacitance – VDS Capacitance C (pF) Case temperature Tc (°C) Vth – Tc Case temperature Tc (°C) PD – Tc Gate-source voltage V GS (V) Total gate charge Q g (nC) Dynamic input/output characteristics Drain-source voltage V DS (V) −80 −40 0 40 80 120 160 ID = 23 A Common source VGS = 10 V Pulse test −80 −40 0 40 80 120 160 Common source VDS = 10 V ID = 1 mA Pulse test 0 40 80 120 200 120 160 160 200 0 40 80 120 200 160 100 VDD = 80 V VGS VDS Common source ID = 45 A Tc = 25°C Pulse test 50000 100 1000 10000 0.1 1 10 100 5000 3000 500 300 Ciss 30 50 35 0.3 0.5 30000 Coss Crss Common source VGS = 0 V f = 1 MHz Tc = 25°C 300 100 −1.6 1000 Common source Tc = 25°C Pulse test VGS = 0 V 3

Drain current I D (A) Channel temperature (initial) Tch (°C) EAS – Tch Avalanche energy E AS (mJ) rth – tw Pulse width t w ( s ) Normalized transient thermal impedance rth (t)/Rth (ch-c) Drain-source voltage V DS (V) 100 200 300 500 400 50 75 100 125 175 150 0.1 10 μ 100 μ 1 m 10 m 100 m 1 10 Single pulse 0.2 0.1 0.05 0.02 0.01 T PDM t Duty = t/T Rth (ch-c) = 1.0°C/W Duty = 0.5 0.01 0.3 0.03 0 V 15 V Test circuit Wave form IAR BVDSS VDD V DS RG = 25 Ω VDD = 25 V, L = 373 μH ⎟⎟ −⋅ ⋅ ⋅ = VDDBVDSS BVDSS2I L2 1ΕAS 0.1 1 10 100 1000 100 1000 DC operation ID max (continuous) 1 ms * VDSS max ID max (pulsed) * * Single nonrepetitive pulse Tc = 25°C Curves must be derated linearly with increase in temperature. 0.3 300 3 30 300 100 μs *

RESTRICTIONS ON PRODUCT USE 20070701-EN

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.