2SK303 UTC

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

UTC UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R206-071,A Low-Frequency General-Purpose Amplifier Applications

FEATURES

  • Ideal for potentiometers, analog switches, low frequency amplifiers, constant current supplies, and impedance conversion. SOT-23 1: Drain 2: Source 3: Gate ABSOLUTE MAXIMUM RATINGS (Ta=25℃) PARAMETER SYMBOL RATINGS UNIT Drain-to-Source Voltage V DSS 30 V Gate-to-Drain Voltage V GDS -30 V Gate Current I G 10 mA Drain Current I D 20 mA Allowable Power Dissipation P D 200 mW Junctin Temperature T j 150 ℃ Storage Temperature T stg -55 ~ +150 ℃ ELECTRICAL CHARACTERISTICS (Ta=25℃) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Gate-to-Drain V (BR)GDS IG=-10μA -30 V Gate-to-Source Leakage Current I GSS V GS=-20V -1.0 nA Zero-Gate Voltage Drain Current I DSS* V DS=10V, VGS=0 0.6* 12.0* mA Cutoff Voltage V GS(off) VDS=10V, ID=1μA -1 -4 V Forward Transfer Admittance | yfs | V DS=10V, VGS=0, f=1MHz 2.5 6.0 mS Input Capacitance C iSS V DS=10V, VGS=0, f=1MHz 5 pF Reverse Transfer Capacitance C rSS V DS=10V, VGS=0, f=1MHz 1.5 pF Drain-to- Source ON Resistance R DS (ON) V DS=10mV, VGS=0 250 Ω CLASSIFICATION OF IDSS RANK V2 V3 V4 V5 MARKING CODE V2 V3 V4 V5

UTC UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R206-071,A TYPICAL PERFORMANCE CHARACTERISTICS Drain-to-Source Voltage, V DS (V) 5.0 Drain Current, I D (mA) 1.0 2.0 3.0 4.0 VGS =0 ID - VDS -0.1V -0.2V -0.3V -0.4V Drain-to-Source Voltage, V DS (V) Drain Current, I D (mA) VGS =0 ID - VDS -0.1V -0.2V -0.3V -0.4V 50 10 15 25 3020 Gate-to-Source Voltage, V GS (V) Drain Current, I D (mA) ID - VGS 3.0mA 1.0mA IDSS =9.0mA 5.0mA Gate-to-Source Voltage, V GS (V) Drain Current, I D (mA) VDS =10V ID - VGS 75℃ 25℃ Ta = -25℃ VDS =10V Saturation Drain Current, I DSS (mA) Cutoff Voltage, V GS(off) (V) -1.0 VGS(off) - IDSS 1.05 25 10 2 ID = 1.0μA VDS = 10V 7 37 Drain Current, I D (mA) Forward Transfer Admittance, | yfs | (mS) | yfs | - ID 30.1 5 5 10 2 f = 1kHz VDS = 10V 2 771.0 323 5.0mA 3.0mA 9.0mA IDSS = 1.0mA 1.0

UTC UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R206-071,A Saturation Drain Current, I DSS (mA) Forward Transfer Admittance, | yfs | (mS) 1.0 | yfs | - IDSS 1.05 25 10 2 f = 1kHz VDS = 10V 7 37 VGS = 0V Drain-to-Source Voltage, V DS (V) 100nGate-to-Drain Ieak Current, I GDL (A) 10n IGDL - VDS 502 0 ID = 1mA 10 2515 100p 10p DC IGDL DC ID D SG Drain-to-Source Voltage, V DS (V) Input Capacitance, C iss (pF) 1.0 Ciss - VDS 1.0 2 31 0 3 7 f = 1MHz 7 72 VGS = 0V Drain-to-Source Voltage, V DS (V) Reverse Transfer Capacitance, C rss (pF) 1.0 Crss - VDS 1.0 2 31 0 3 7 f = 1MHz VGS = 0V 7 7 2 55 Frequency, f (Hz) 16Noise Figure, NF (dB) NF - f 25 2 10k VDS = 10V 52 55 100 1k 100k Rg = 1kΩ 3.0mA0.3mAID = 0.1mA Frequency, f (Hz) 12Noise Figure, NF (dB) NF - f 25 2 10k 52 55 100 1k 100k ID = 3.0mA VDS = 10V Rg = 1kΩ 10kΩ 100kΩ

UTC UNISONIC TECHNOLOGIES CO., LTD. 4 QW-R206-071,A Drain Current, I DSS (mA) Drain-to-Source ON Resistance, R DS(ON) (Ω) RDS(ON) - IDSS 57 1.0 5 10 3 VGS = 0 3 3 7 VDS = 10mV 1000 100 Ambient Temperature, Ta ( )℃ 160 Allowable Power Dissipation, PD (mW) 120 240 PD - Ta 20 40 100 120 1600 80 14060 200 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.