2SK2839 TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
TOSHIBA FIELD EFFECT TRANSISTOR SILICON N CHANNEL MOS TYPE (z-MOSV) HIGH SPEED, HIGH CURRENT SWITCHING APPLICATIONS INDUSTRIAL APPLICATIONS CHOPPER REGULATOR, DC-DC CONVERTER AND MOTOR DRIVE Unit in mm
APPLICATIONS
e7MAX. 1.7MAX. ves91 ) 2] Tossa e 4V Gate Drive q 7] - @ Low Drain-Source ON Resistance : RD§(ON)=30m0 (Typ.) |--o—| o e@ High Forward Transfer Admittance : |Yfs|=11S (Typ.) ry is @ Low Leakage Current : Ipgg=100uA (Max.) (Vpg=30V) | I 8 ossotli| || Jiloesor @ Enhancement-Mode — : Vty=0.8~2.0V (Vpg=10V, Ip=1mA) zor” 29. 3 MAXIMUM RATINGS (Ta = 25°C) 2 Gra |: CHARACTERISTIC SYMBOL UNIT 12 3 Drain Source Voltage Vpss_[_80_|V_] : Drain-Gate Voltage (Rgg=20k) Vpcr | 30 | V | 1. GATE Gate-Source Voltage - Yass 2% v 3 SOURCE j [pc | DT to A prin Curent | ite [ppt at JEDEC = Drain Power Dissipation (Ta=25°C) | Pp (Note) Single Pulse Avalanche Energy** | Eag | 282 | mJ _ |/TOSHIBA 2-7H1B Avalanche Current Weight : 018g Channel Temperature MARKING Storage Temperature Range —55~150 Note : Mounted on ceramic substrate (linch?X0.8t) THERMAL CHARACTERISTICS vud CHARACTERISTIC SYMBOL Thermal Resistance, Channel to Ambient Rth (ch-a) Note ; * Repetitive rating ; Pulse Width Limited by Max. junction temperature. ** Vpp=25V, Starting Toy =25°C, L=2mH, RG=250, IAR=10A This transistor is an electrostatic sensitive device. Please handle with caution. 9610016 4A @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent’ products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. @The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed. by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 1998-11-12 1/2
ELECTRICAL CHARACTERISTICS (Ta = 25°C) cuanacrenismic | svamou | tmst coNprmon [mw [1¥P,[wax [ONT Cate Leakage Current Tess [Vas=2I6V, Vpg=0v L= = [a [oa Drain Cut-off Current Ipss Vps=30V, Vag=0V [| — | — [| 100] pA | Drain-Source Breakdown See Ninifacimver [||| Gate Threshold Voltage Vps=10V, Ip=1mA [os | — | 20] V | Drain-Source ON Resistance |RDS (ON) Vag=l0V, Ip=5A [— [30] 40 | mQ Forward Transfer Taput Capacitance =| 700 | Reverse Transfer Vps=10V, Vag=0V Capacitance Crss f=1MHz 150 pF Output Capacitance [= [360 | op Beal Lal out VGS oy ke Turn-on Time ‘L= swing [TPR TINE] ton | S a (-| =| -| Time wi Fall Time te 100 Vpp515V . VIN : tr, te<5ns, Turn-off Time | tofr Duty <1%, ty =10ps 300 Total Gate Charge (Gate- Q Source Plus Gate-Drain) 8 _ © Gate-Souree Charge [Qe] VOD 24V, Vos=10¥, p=308 FT a9 Gate-Drain (“Miller”) Charge [— | 6] — | SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION Current Pulse Drain Reverse Current | Ipgp |S SCS = | = | OY Diode Forward Voltage VpsF_ |IpR=10A, Vgg=0V [| — | — [-20][ Vv | IpR=10A, Vag=0V [30 | — as] Reverse Recovery Charge dIpR/at=50A/ ys [= | 140 | — J ac | 1998-11-12 2/2