2SK2614_06 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

TOSHIBA Field Effect Transistor Silicon N-Channel MOS Type (L 2−π−MOSV) 2SK2614 Chopper Regulator, DC/DC Converter and Motor Drive

Applications

z Low drain −source ON-resistance : R DS (ON) = 0.032 Ω (typ.) z High forward transfer admittance : |Y fs| = 13S (typ.) z Low leakage current : I DSS = 100 μA (max) (VDS = 50 V) z Enhancement mode : V th = 0.8~2.0 V (VDS = 10 V, ID = 1 mA) Absolute Maximum Ratings (Ta = 25°C) Note 1: Ensure that the channel temperature does not exceed 150°C. Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics Characteristic Symbol Max Unit Thermal resistance, channel to case R th (ch−c) 3.125 °C / W Thermal resistance, channel to ambient R th (ch−a) 125 °C / W This transistor is an electrostatic-sensitive device. Handle with care. Unit: mm JEDEC ― JEITA SC-64 TOSHIBA 2-7B5B Weight: 0.36 g (typ.) JEDEC ― JEITA ― TOSHIBA 2-7B7B Weight: 0.36 g (typ.) Characteristic Symbol Rating Unit Drain−source voltage VDSS 50 V Drain−gate voltage (RGS = 20 kΩ) V DGR 50 V Gate−source voltage V GSS ±20 V DC (Note 1) I D 20 A Drain current Pulse (Note 1) I DP 50 A Drain power dissipation (Tc = 25°C) P D 40 W Channel temperature Tch 150 °C Storage temperature range Tstg −55~150 °C

Electrical Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Gate leakage current IGSS VGS = ±16 V, VDS = 0 V — — ±10 μA Drain cutoff current IDSS VDS = 50 V, VGS = 0 V — — 100 μA Drain−source breakdown voltage V (BR) DSS ID = 10 mA, VGS = 0 V 50 — — V Gate threshold voltage Vth VDS = 10 V, ID = 1 mA 0.8 — 2.0 V VDS = 4 V, ID = 5 A — 0.055 0.08 Drain−source ON-resistance R DS (ON) VDS = 10 V, ID = 10 A — 0.032 0.046 Ω Forward transfer admittance |Y fs| V DS = 10 V, ID = 10 A 7 13 — S Input capacitance Ciss — 900 — Reverse transfer capacitance C rss — 130 — Output capacitance Coss VDS = 10 V, VGS = 0 V, f = 1 MHz — 370 — pF Rise time tr — 15 — Turn−on time t on — 25 — Fall time tf — 30 — Switching time Turn−off time t off Duty ≤ 1%, tw = 10 μs — 100 — ns Total gate charge (gate−source plus gate−drain) Qg — 25 — Gate−source charge Q gs — 19 — Gate−drain (“Miller”) charge Q gd VDD ≈ 40 V, VGS = 10 V, ID = 20 A — 6 — nC Source−Drain Ratings and Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Continuous drain reverse current (Note 1) IDR — — — 20 A Pulse drain reverse current (Note 1) I DRP — — — 50 A Forward voltage (diode) VDSF I DR = 20 A, VGS = 0 V — — −1.7 V Reverse recovery time trr — 60 — ns Reverse recovery charge Qrr IDR = 20 A, VGS = 0 V, dIDR / dt = 50 A / μs — 45 — μC Marking 0 V 10 V VGS RL = 3 Ω VDD ≈ 30 V ID = 10 A OUT 4.7 Ω K2614 Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. Part No. (or abbreviation code)

Forward transfer admittance ⎪Yfs⎪ (S) Drain current I D (A) |Yfs| – ID Drain current I D (A) RDS (ON) – ID Drain-source ON-resistance RDS (ON) (Ω) Drain-source voltage V DS ( V ) ID – VDS Drain current I D ( A ) Drain-source voltage V DS ( V ) ID – VDS Drain current I D ( A ) Gate-source voltage V GS ( V ) ID – VGS Drain current ID (A) Drain-source voltage V DS (V) Gate-source voltage V GS ( V ) VDS – VGS ID = 25 A Common source Tc = 25°C Pulse test 1.2 0 4 0.4 0.8 1.6 2.0 8 12 16 20 0 2 100 Tc = −55°C 4 6 8 10 Common source VDS = 10 V Pulse test 104 Common source Tc = 25°C Pulse test 2 6 8 3.5 VGS = 3 V 4.5 Tc = −55°C 100 1 10 3 100 100 5 30 50 Common source VDS = 10 V Pulse test Common source Tc = 25°C Pulse test 0.01 11 0 31 0 0 0.3 0.1 0.03 0.05 0.5 5 30 50 VGS = 4 V 1.0 Common source Tc = 25°C Pulse test 0.2 0.6 0.8 VGS = 3 V 3.5 0.4

Drain-source voltage V DS (V) IDR – VDS Drain reverse current I DR (A) Gate threshold voltage Vth ( V ) Drain-source voltage V DS (V) Capacitance – VDS Capacitance C (pF) Ambient temperature Ta (°C) Vth – Tc Drain power dissipation PD ( W ) Ambient temperature Ta (°C) PD – Ta Gate-source voltage V GS (V) Total gate charge Q g (nC) Dynamic input / output characteristics Drain-source voltage V DS (V) Ambient temperature Ta (°C) RDS (ON) – Ta Drain-source ON-resistance RDS (ON) ( Ω) −80 160 80 −40 400 120 Common source VDS = 10 V ID = 1 mA Pulse test 1.2 0.4 0.8 1.6 2.0 −80 160 40−40 80 120 Common source Pulse test ID = 12 A VGS = 4 V VGS = 10 V 0.04 0.08 0.12 0.16 0.20 ID = 25 A Common source Tc = 25°C Pulse test 100 VGS = 0, −1 V 40 120 160 2000 5020 10 30 40 VDS VGS VDD = 40 V Common source ID = 20 A Ta = 25°C Pulse test 0.1 100 10 0.3 3 100 300 3000 1 30 1000 5000 500 Common source VGS = 0 V f = 1 MHz Ta = 25°C Crss Coss Ciss

Drain-source voltage V DS (V) SAFE OPERATING AREA * Single pulse Ta=25°C Curves must be derated linearly with increase in temperature. ID max (continuous) ID max (pulse)* VDSS max 1 ms* 100 μs* DC OPERATION Ta =25°C 0.1 0.3 0.5 100 300 1 3 10 30 100 300 0.3 Drain current I D (A) Pulse width t w ( S ) Normalized transient thermal impedance rth (t)/Rth (ch-a) SINGLE PULSE

RESTRICTIONS ON PRODUCT USE 20070701-EN

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.