2SK2613_06 TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 6
Technical content
TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (π-MOSIII) 2SK2613 Switching Regulator Applications, DC-DC Converter and Motor Drive Applications
- Low drain-source ON resistance: R DS (ON) = 1.4 Ω (typ.)
- High forward transfer admittance: ⎪Yfs⎪ = 6.0 S (typ.)
- Low leakage current: IDSS = 100 μA (max) (VDS = 800 V)
- Enhancement-model: Vth = 2.0~4.0 V (VDS = 10 V, ID = 1 mA) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Drain-source voltage VDSS 1000 V Drain-gate voltage (RGS = 20 kΩ) V DGR 1000 V Gate-source voltage VGSS ±30 V DC (Note 1) I D 8 Drain current Pulse (Note 1) I DP 24 A Drain power dissipation (Tc = 25°C) P D 150 W Single pulse avalanche energy (Note 2) EAS 910 mJ Avalanche current IAR 8 A Repetitive avalanche energy (Note 3) E AR 15 mJ Channel temperature Tch 150 °C Storage temperature range Tstg −55~150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics Characteristics Symbol Max Unit Thermal resistance, channel to case R th (ch-c) 0.833 °C/W Thermal resistance, channel to ambient R th (ch-a) 50 °C/W Note 1: Please use devices on condition that the channel temperature is below 150°C. Note 2: V DD = 90 V, Tch = 25°C, L = 26.3 mH, RG = 25 Ω, IAR = 8 A Note 3: Repetitive rating: Pulse width limited by max junction temperature This transistor is an electrostatic sensitive device. Please handle with caution. Unit: mm 1. GATE 2. DRAIN (HEAT SINK) 3. SOURSE JEDEC ― JEITA ― TOSHIBA 2 −16C1B Weight: 4.6 g (typ.)
Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Gate leakage current IGSS V GS = ±30 V, VDS = 0 V ⎯ ⎯ ±10 μA Drain-source breakdown voltage V (BR) GSS IG = ±10 μA, VDS = 0 V ±30 ⎯ ⎯ V Drain cut-OFF current IDSS V DS = 800 V, VGS = 0 V ⎯ ⎯ 100 μA Drain-source breakdown voltage V (BR) DSS ID = 10 mA, VGS = 0 V 1000 ⎯ ⎯ V Gate threshold voltage Vth V DS = 10 V, ID = 1 mA 2.0 ⎯ 4.0 V Drain-source ON resistance RDS (ON) V GS = 10 V, ID = 4 A ⎯ 1.4 1.7 Ω Forward transfer admittance ⎪Yfs⎪ V DS = 20 V, ID = 4 A 2.0 6.0 ⎯ S Input capacitance Ciss ⎯ 2000 ⎯ Reverse transfer capacitance Crss ⎯ 30 ⎯ Output capacitance Coss VDS = 25 V, VGS = 0 V, f = 1 MHz ⎯ 200 ⎯ pF Rise time tr ⎯ 20 ⎯ Turn-ON time ton ⎯ 40 ⎯ Fall time tf ⎯ 30 ⎯ Switching time Turn-OFF time t off ⎯ 100 ⎯ ns Total gate charge (gate-source plus gate-drain) Qg ⎯ 65 ⎯ Gate-source charge Qgs ⎯ 40 ⎯ Gate-drain (“miller”) charge Qgd VDD ∼ − 400 V, VGS = 10 V, ID = 8 A ⎯ 25 ⎯ nC Source-Drain Ratings and Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Continuous drain reverse current (Note 1) I DR ⎯ ⎯ ⎯ 8 A Pulse drain reverse current (Note 1) I DRP ⎯ ⎯ ⎯ 24 A Forward voltage (diode) VDSF I DR = 8 A, VGS = 0 V ⎯ ⎯ −1.9 V Reverse recovery time trr ⎯ 1600 ⎯ ns Reverse recovery charge Qrr IDR = 8 A, VGS = 0 V, dIDR/dt = 100 A/μs ⎯ 24 ⎯ μC Marking Duty < = 1%, tw = 10 μs 0 V
10 VVGS
RL = 100 Ω VDD ∼ − 400 V ID = 4 A VOUT 4.7 Ω K2613 TOSHIBA Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. Part No. (or abbreviation code)
0.1 0.3 1 3 10 30 0.1 0.3 0.5 VGS = 10,15 Common source Tc = 25°C Pulse test Forward transfer admittance ⎪Yfs⎪ (S) Drain-source voltage V DS (V) Drain-source voltage V DS (V) ID – VDS Drain current I D ( A ) Drain-source voltage V DS (V) ID – VDS Drain current I D ( A ) Gate-source voltage V GS (V) ID – VGS Drain current I D ( A ) Gate-source voltage V GS (V) VDS – VGS Drain current I D ( A ) ⎪Yfs⎪ − ID Drain current I D ( A ) RDS (ON) − ID Drain-source on resistance RDS (ON) ( Ω) 4 0 208 12 16 6.0Common source Tc = 25°C Pulse test VGS = 4.75 V 5.0 5.25 5.5 5.75 10 15 Common source VSD = 20 V Pulse test 2 0 104 6 8 Tc = −55°C 100 0.1 100 0.1 10010 100 Tc = −55°C Common source VSD = 20 V Pulse test 40 208 12 16 Common source Tc = 25°C Pulse test ID = 8 A Common source Tc = 25°C Pulse test 200 10040 60 80 VGS = 5.0 V 6.25 5.25 5.5 5.75 6.5 6.0
1 0.1 1000 10 Ciss Coss Crss Common source VGS = 0 V f = 1 MHz Tc = 25°C VGS = 0, −1 V 100 0.1 −0.20 −1.2−0.6 −0.4 −0.8 −1.0 Drain power dissipation P D (W) Gate threshold voltage V th (V) Case temperature Tc (°C) RDS (ON) − Tc Drain-source on resistance R DS (ON) ( Ω) Drain-source voltage V DS (V) IDR − VDS Drain reverse current I DR (A) Drain-source voltage V DS (V) Capacitance – VDS Capacitance C (pF) Case temperature Tc (°C) Vth − Tc Case temperature Tc (°C) PD − Tc −40 −80 1600 40 80 Common source VGS = 10 V Pulse test ID = 8 A 200 120 160 0 80 120 20040 160 Drain-source voltage V DS (V) Gate-source voltage V GS (V) Total gate charge Q g (nC) Dynamic input/output characteristics −80 0 40 80 120 160−40 Common source VDS = 10 V ID = 1 mA Pulse test 500 100 300 200 400 0 40 60 80 10020 Common source ID = 8 A Tc = 25°C Pulse test 400 200 VDS = 100 V VDS VGS
10 μ 100 μ 1 m 10 m 100 m 1 10 0.001 0.01 0.1 T PDM t Duty = t/T Rth (ch-c) = 0.833°C/W Single pulse Duty = 0.5 0.2 0.1 0.05 0.02 0.01 rth − tw Safe operating area EAS – Tch Drain-source voltage V DS (V) Pulse width t w ( S ) Channel temperature (initial) Tch (°C) Normalized transient thermal impedance rth (t)/Rth (ch-a) Avalanche energy E AS (mJ) Drain current I D ( A ) −15 V 15 V Test circuit Wave form IAR BVDSS VDD V DS RG = 25 Ω VDD = 90 V, L = 26.3 mH ⎟⎟ −⋅ ⋅ ⋅ = VDDBVDSS BVDSS2I L2 1ΕAS 0.01 0.1 0.03 0.05 0.3 0.5 10 3 100 30 10000 300 DC Operation Tc = 25°C 100 μs * 1 ms * * Single nonrepetitive pulse Tc = 25°C Curves must be derated linearly with increase in temperature. ID max (pulsed) * ID max (continuous) VDSS max 1000 3000 100 200 400 600 1000 800 50 75 100 125 150
RESTRICTIONS ON PRODUCT USE 20070701-EN
- The information contained herein is subject to change without notice.
- TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
- The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
- The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
- The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
- Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.