2SK2434 SANYO

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

Features

  • Low ON-resistance.
  • High-speed switching.
  • 10V drive. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage V DSS 450 V Gate-to-Source Voltage V GSS ±30 V Drain Current (DC) I D 5A Drain Current (Pulse) I DP PW≤10μs, duty cycle≤1% 20 A Allowable Power Dissipation P D Tc=25°C4 0 W Channel Temperature Tch 150 °C Storage Temperature Tstg - -55 to +150 °C Electrical Characteristics at Ta=25°C RatingsParameter Symbol Conditions min typ max Unit Drain-to-Source Breakdown Voltage V (BR)DSS ID=1mA, VGS=0V 450 V Zero-Gate Voltage Drain Current I DSS VDS=450V, VGS=0V 1.0 mA Gate-to-Source Leakage Current I GSS VGS= ±30V, VDS=0V ±100 nA Cutoff Voltage V GS(off) V DS=10V, ID=1mA 2.0 3.0 V Forward Transfer Admittance ⏐yfs⏐ VDS=10V, ID=3A 2.0 4.0 S Static Drain-to-Source On-State Resistance RDS(on) I D=3A, VGS=10V 1.0 1.4 Ω Input Capacitance Ciss V DS=20V, f=1MHz 700 pF Output Capacitance Coss V DS=20V, f=1MHz 100 pF Reverse Transfer Capacitance Crss V DS=20V, f=1MHz 40 pF Continued on next page.

No.8606-2/3 Continued from preceding page. RatingsParameter Symbol Conditions min typ max Unit Turn-ON Delay Time t d(on) See specified Test Circuit. 15 ns Rise Time t r See specified Test Circuit. 30 ns Turn-OFF Delay Time t d(off) See specified Test Circuit. 130 ns Fall Time t f See specified Test Circuit. 45 ns Diode Forward Voltage V SD IS=5A, VGS=0V 1.8 V Package Dimensions Switching Time Test Circuit unit : mm (typ) 7002-001 6.2 7.8 8.2 0.2 0.44.2 1.0 1.0 5.08 2.542.54 8.4 10.0 1.2 0.3 0.6 0.6 0.7 7.8 5.2 6.210.0 6.0 2.5 1 2 1 : Gate 2 : Source 3 : Drain SANYO : ZP PW=1μs D.C.≤0.5% P.G RGS 50Ω ID RL 66.7Ω VDD=200V VOUT 2SK2434 VGS=10V PD -- Tc Case Temperature, Tc -- °C Allowable Power Dissipation, PD -- W Drain-to-Source V oltage, VDS -- V A S O Drain Current, ID -- A IT15423IT15422 0 20 40 60 80 100 120 140 160 1023 5 7 2 0.1 1.0 0.01 1.0 DC operation IDP=20A (PW≤10μs) ID=5A 1ms 10ms 100ms 10μs 100μs 10035 2 35 77 Operation in this area is limited by RDS(on). Tc=25°C Single pulse

No.8606-3/3PS SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party’s intellectual property rights which has resulted from the use of the technical information and products mentioned above. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. This catalog provides information as of March, 2010. Specifications and information herein are subject to change without notice. Note on usage : Since the 2SK2434 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects.