2SJ591

2SJ591LS SANYO

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 4

Technical content

Features

• Low ON-resistance.
• 4V drive.

No.7150-2/4 Continued from preceding page. RatingsParameter Symbol Conditions min typ max Unit Input Capacitance Ciss V DS =- -20V, f=1MHz 3100 pF Output Capacitance Coss V DS =- -20V, f=1MHz 640 pF Reverse Transfer Capacitance Crss V DS =- -20V, f=1MHz 200 pF Turn-ON Delay Time t d(on) See specified Test Circuit. 24 ns Rise Time t r See specified Test Circuit. 140 ns Turn-OFF Delay Time t d(off) See specified Test Circuit. 270 ns Fall Time t f See specified Test Circuit. 140 ns Total Gate Charge Qg V DS =- -10V, VGS =- -10V, ID =- -28A 92 nC Gate-to-Source Charge Qgs V DS =- -10V, VGS =- -10V, ID =- -28A 12 nC Gate-to-Drain “Miller” Charge Qgd V DS =- -10V, VGS =- -10V, ID =- -28A 26 nC Diode Forward Voltage V SD IS=- -28A, VGS =0 - -0.92 - -1.2 V Switching Time Test Circuit PW=10 µs D.C.≤1% --10V VIN P. G 50Ω G S ID = --14A R L=2.14Ω VDD = --30V VOUT 2SJ591LS VIN D --60 --40 --20 20 04 0 8 0 60 100 120 140 R DS (on) -- VGS IT04161 IT04159 ID -- VDS --5 --10 --15 --20 --25 --30 IT04160 --5 --10 --15 --20 --25 --30 --35 ID -- VGS IT04162 R DS (on) -- Tc V DS = --10V Tc= --25 --10.0V --3.0V --4.0V --3.5V V GS = --2.5V ID= --14A, V GS= --10VID= --14A, V GS= --4V --8.0V --6.0V --5.0V Static Drain-to-Source On-State Resistance, RDS (on) -- mΩ Static Drain-to-Source On-State Resistance, RDS (on) -- mΩ Gate-to-Source V oltage, VGS -- V Drain-to-Source V oltage, VDS -- V Drain Current, ID -- A Gate-to-Source V oltage, VGS -- V Drain Current, ID -- A Case Temperature, Tc -- °C Tc=25°C ID = --14A

No.7150-3/4 0 1 02 03 04 05 06 07 08 09 0 1 0 0 10000 1000 100 --100 --10 --1.0 --0.1 --0.01 --0.00123 5 7--0.0123 5 7 --0.123 5 7 --1.023 5 7 --10 23 5 7--100 100 1.0 0.1 0.01 0 20 40 60 80 100 120 140 160 0.5 1.0 1.5 2.5 2.0 PD -- Ta IT04169 IT04166 Ciss, Coss, Crss -- VDS IT04164 IF -- VSD IT04163 yfs -- ID SW Time -- ID IT04165 --2 --4 --6 --8 --12 --10 VGS -- Qg IT04167 V DS = --10V ID = --28A V DS = --10V V GS =0 f=1MHz Tc= --25 75°C Tc=75 --25 --0.1 23 5 7 --1.0 23 5 7 --10 23 5 7 --100 1000 100 td(on) td(off) tr tf Ciss Crss Coss --100 --10 --1.0 --0.1 IT04168 A S O --0.1 2 3 57 2 3 57 2 3 57--1.0 --10 --100 DC Operation 100 µs1ms 10ms 100ms IDP = --112A ID = --28A Operation in this area is limited by RDS (on). 25°C 10µs IT04170 PD -- Tc 0 20 40 60 80 100 120 140 160 V DD = --30V V GS = --10V Drain Current, ID -- A Switching Time, SW Time -- ns Drain Current, ID -- A Forward Transfer Admittance, yfs -- S Diode Forward V oltage, VSD -- V Forward Current, IF -- A Drain-to-Source V oltage, VDS -- V Ciss, Coss, Crss -- pF Total Gate Charge, Qg -- nC Gate-to-Source V oltage, VGS -- V Ambient Temperature, Ta -- °C Allowable Power Dissipation, PD -- W Case Temperature, Tc -- °C Allowable Power Dissipation, PD -- W Drain-to-Source V oltage, VDS -- V Drain Current, ID -- A No heat sink Tc=25°C Single pulse

No.7150-4/4 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2002. Specifications and information herein are subject to change without notice. PS