2SJ537 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (L 2−π−MOSVI) 2SJ537 Chopper Regulator, DC−DC Converter and Motor Drive

Applications

z Low drain−source ON resistance : R DS (ON) = 0.16 Ω (typ.) z High forward transfer admittance : |Y fs| = 3.5 S (typ.) z Low leakage current : I DSS = −100 µA (VDS = −50 V) z Enhancement−mode : V th = −0.8~−2.0 V (VDS = −10 V, ID = −1 mA) Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Drain−source voltage V DSS −50 V Drain−gate voltage (RGS = 20 kΩ) V DGR −50 V Gate−source voltage V GSS ±20 V DC (Note 1) I D −5 A Drain current Pulse (Note 1) I DP −15 A Drain power dissipation P D 0.9 W Channel temperature T ch 150 °C Storage temperature range T stg −55~150 °C Thermal Characteristics Characteristics Symbol Max Unit Thermal resistance, channel to ambient Rth (ch−a) 138 °C / W Note 1: Please use devices on condition that the channel temperature is below 150°C. This transistor is an electrostatic sensitive device. Please handle with caution. Unit: mm JEDEC TO-92MOD JEITA ― TOSHIBA 2-5J1C Weight: 0.36 g (typ.)

Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Gate leakage current I GSS V GS = ±16 V, VDS = 0 V — — ±10 µA Drain cut−off current I DSS V DS = −50 V, VGS = 0 V — — −100 µA Drain−source breakdown voltage V (BR) DSS I D = −10 mA, VGS = 0 V −50 — — V Gate threshold voltage V th V DS = −10 V, ID = −1 mA −0.8 — −2.0 V Drain−source ON resistance R DS (ON) VGS = −10 V, ID = −2.5 A — 0.16 0.19 Ω Forward transfer admittance |Y fs| V DS = −10 V, ID = −2.5 A 1.5 3.5 — S Input capacitance C iss — 470 — Reverse transfer capacitance C rss — 60 — Output capacitance C oss VDS = −10 V, VGS = 0 V, f = 1 MHz — 210 — pF Rise time t r — 25 — Turn−on time t on — 35 — Fall time t f — 20 — Switching time Turn−off time t off — 120 — ns Total gate charge (Gate −source plus gate−drain) Qg — 18 — Gate−source charge Q gs — 13 — Gate−drain (“miller”) charge Q gd VDD ≈ −40 V, VGS = −10 V, ID = −5 A — 5 — nC Source−Drain Ratings and Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Continuous drain reverse current (Note 1) IDR — — — −5 A Pulse drain reverse current (Note 1) IDRP — — — −15 A Forward voltage (diode) V DSF I DR = −5 A, VGS = 0 V — — 1.5 V Marking J537 Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. Part No. (or abbreviation code)

Forward transfer admittance ⎪Yfs⎪ ( S ) Drain-source voltage V DS ( V ) ID – VDS Drain current I D ( A ) Drain-source voltage V DS ( V ) ID – VDS Drain current I D ( A ) Gate-source voltage V GS ( V ) ID – VGS Drain current ID (A) Gate-source voltage V GS ( V ) VDS – VGS Drain current I D ( A ) |Yfs| – ID Drain current I D ( A ) Drain-source ON resistance RDS (ON) ( Ω) RDS (ON) – ID Drain-source voltage V DS (V) VGS = −2.5V −3.5 −4−10 −4 −6 −8 −10 −10 0 −2 VGS = −2.5 V −3.5 −10 −8 −12 −16 −20 −0.8 −1.2 −1.6 −2.0 −0.4 0 −4 −100 0.1 −0.1 −1 −10 −100 0.01 0.1 −4 −8 −10 0 −2 10 10 −10 Ta = −55°C 100 1 VGS = −4 V −10 −10 −1 −0.1 Common source Ta = 25°C Pulse Test Common source Ta = 25°C Pulse Test Ta = −55°C 100 Common source VDS = −10 V Pulse Test ID = −5 A −1.3 −2.5 Common source Ta = 25℃ Pulse Test Common source VDS = −10 V Pulse Test Common source Ta = 25°C Pulse T est

Ambient temperature Ta (°C) Vth − Ta Gate threshold voltage Vth ( V ) Ambient temperature Ta (°C) Total gate charge Q g (nC) Capacitance C (pF) Capacitance – VDS RDS (ON) − Ta Drain-source ON resistance RDS (ON) ( Ω) Ambient temperature Ta (°C) IDR − VDS Drain reverse current I DR ( A ) Drain-source voltage V DS (V) PD − Ta Drain power dissipation PD (W) Drain-source voltage V DS ( V ) Dynamic input / output characteristics −80 0 40 80 120 160 −40 −2.0 −0.4 −1.2 −0.8 −1.6 1.0 0.2 0.6 0.4 −40 −80 160 0 40 120 80 1.6 0.4 1.2 0 8040 160120 0.8 VGS = 10 V VGS = 4 V ID = 2.5A 1.3 −1.3 −2.5 −0.1 −100 100 −1 −10 10000 0.40 0.8 1.2 1.6 −0.1 −100 −10 VGS = 0 V −1 −10 1000 Common source Pulse Test Drain-source voltage V DS (V) Common source VDS = −10 V ID = −1mA Pulse Test Gate-source voltage V GS (V) Common source Ta = 25°C Pulse T est Ciss Coss Crss Common source VGS = 0 V f = 1 MHz Ta = 25°C 0.8 −80 −60 −40 −20 0 20 30 10 −10 −20 −15 VDD = −40V −20V −10V VDS VGS Common source ID = −5 A Ta = 25°C Pulse T est

rth − tw Pulse width t w (S) Normalized transient thermal impedance rth (t)/Rth (ch-a) Single Pulse 0.001 100μ 1m 10m 100m 1 10 100 0.01 0.1 SAFE OPERATING AREA Drain-source voltage V DS ( V ) Drain current I D (A) −0.01 −0.1 −1 −10 −0.1 −100 −0.01 −100 −10 ※ Single pulse Ta=25℃ Curves must be derated linearly with increase in temperature. ID max (pulse)* IDmax (continuous) DC OPEATION Ta =25°C 100 µs * 1 ms * VDSS max Duty=t/T Rth(ch-a)=138℃/W

  • The information contained herein is subject to change without notice.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others.
  • TOSHIBA is continually working to improve the quality an d reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
  • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk.
  • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 030619EAARESTRICTIONS ON PRODUCT USE