2SJ508_07 TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 6
Technical content
TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (L 2−π−MOSV) 2SJ508 Chopper Regulator, DC−DC Converter and Motor Drive
Applications
z Low drain−source ON resistance : R DS (ON) = 1.34 Ω (typ.) z High forward transfer admittance : |Yfs| = 0.7 S (typ.) z Low leakage current : I DSS = −100 μA(max) (VDS = −100 V) z Enhancement mode : V th = −0.8~−2.0 V (VDS = −10 V, ID = −1 mA) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Drain−source voltage VDSS −100 V Drain−gate voltage (RGS = 20 kΩ) V DGR −100 V Gate−source voltage V GSS ±20 V DC (Note 1) I D −1 A Drain current Pulse (Note 1) I DP −3 A Drain power dissipation PD 0.5 W Drain power dissipation (Note 2) P D 1.5 W Single pulse avalanche energy (Note 3) EAS 136.5 mJ Avalanche current IAR −1 A Repetitive avalanche energy (Note 4) E AR 0.05 mJ Channel temperature Tch 150 °C Storage temperature range Tstg −55~150 °C Note: Using continuously under heavy loads (e.g. the applicat ion of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics Characteristics Symbol Max Unit Thermal resistance, channel to ambient R th (ch−a) 250 °C / W Note 1: Ensure that the channel temperature does not exceed 150°C. Note 2: Mounted on a ceramic substrate (25.4 mm × 25.4 mm × 0.8 mm) Note 3: V DD = −50 V, Tch = 25°C (initial), L = 168 mH, RG = 25 Ω, IAR = −1 A Note 4: Repetitive rating: pulse width limited by maximum channel temperature This transistor is an electrostatic-sensitive device. Please handle with caution. Marking Unit: mm JEDEC ― JEITA ― TOSHIBA 2 −5K1B Weight: 0.05 g (typ.) Z E Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish.
Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Gate leakage current IGSS V GS = ±16 V, VDS = 0 V — — ±10 μA Drain cut−off current IDSS V DS = −100 V, VGS = 0 V — — −100 μA Drain−source breakdown voltage V (BR) DSS I D = −10 mA, VGS = 0 V −100 — — V Gate threshold voltage Vth V DS = −10 V, ID = −1 mA −0.8 — − 2.0 V Drain−source ON resistance R DS (ON) Ω Forward transfer admittance |Y fs| V DS = −10 V, ID = −0.5 A 0.3 0.7 — S Input capacitance Ciss — 135 — Reverse transfer capacitance C rss — 22 — Output capacitance Coss VDS = −10 V, VGS = 0 V, f = 1 MHz — 48 — pF Rise time tr — 20 — Turn−on time t on — 32 — Fall time tf — 25 — Switching time Turn−off time t off — 130 — ns Total gate charge (Gate −source plus gate−drain) Qg — 6.3 — Gate−source charge Q gs — 4.1 — Gate−drain (“miller”) charge Q gd VDD ≈ −80 V, VGS = −10 V, ID = −1 A — 2.2 — nC Source−Drain Ratings and Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Continuous drain reverse current (Note 1) IDR — — — −1 A Pulse drain reverse current (Note 1) I DRP — — — −3 A Forward voltage (diode) VDSF I DR = −1 A, VGS = 0 V — — 1.5 V Reverse recovery time trr — 90 — ns Reverse recovery charge Qrr IDR = −1 A, VGS = 0 V dIDR / dt = 50 A / μs — 180 — nC
ID – VDS ID – VDS ID – VGS VDS – VGS |Yfs| – ID RDS (ON) – ID −4 −6 −8 −10 −0.8 −1.2 −1.6 −2.0 −0.4 0 −2 −8 −12 −16 −20 −1.0 −1.5 −2.0 −2.5 −0.5 0 −4 −10 0.1 −0.01 −0.1 −1 0.1 −0.4 −0.6 −0.8 −1.0 −2 −4 −0.8 −1.2 −1.6 −2.0 −0.4 0 −1 10 10 −0.2 −10−1 −0. 1 Ta = −55°C 100 Common source VDS = −10 V Pulse test −3.0 Common source Ta = 25°C Pulse test ID = −1 A −0.2 −0.5 Common source VDS = −10 V Pulse test Ta = −55°C 25 100 Common source Ta = 25°C Pulse test VGS = −4 V −10 −3.2−10 Common source Ta = 25°C Pulse test VGS = −2.1V −2.5 −2.8 Common source Ta = 25°C Pulse test −10 −4.5 −3.6 VGS = −2.1 V −2.5 Forward transfer admittance ⎪Yfs⎪ (S) Drain-source voltage V DS ( V ) Drain current I D ( A ) Drain-source voltage V DS ( V ) Drain current I D ( A ) Gate-source voltage V GS ( V ) Drain current ID (A) Gate-source voltage V GS ( V ) Drain current I D (A) Drain current I D (A) Drain-source ON resistance RDS (ON) ( Ω) Drain-source voltage V DS (V)
Vth − Ta −80 0 40 80 120 160−40 −2.5 −0.5 −1.5 −1.0 −2.0 RDS (ON) − Ta 2.5 0.5 1.5 1.0 −40 −80 160 0 40 120 80 IDR − VDS 2.0 −0.1 −100 100 −1 −10 10000 0.40 0.8 1.2 1.6 −0.01 −0.1 −10 1000 3.0 VGS = −4 V −10V Common source Pulse test ID = −0.5A Common source Ta = 25°C Pulse test VGS = 0 V −1 −10 Common source VDS = −10 V ID = −1mA Pulse test PD − Ta 2.0 0.5 1.0 1.5 0 80 40 160 120 Dynamic input/output characteristics −160 −120 −80 −40 0 4 6 2 −16 −12 8 10 Common source ID = −1A Ta = 25°C Pulse test VDD = −80V −40V −20V VDS VGS 200 ①25.4mm×25.4mm×0.8mm Mounted on ceramic substrate ②Single ① Common source VGS = 0 V f = 1 MHz Ta = 25°C Ciss Coss Crss Ambient temperature Ta (°C) Gate threshold voltage Vth ( V ) Ambient temperature Ta (°C) Total gate charge Q g (nC) Capacitance C (pF) Capacitance – VDS Drain-source voltage V DS (V) Drain-source ON resistance RDS (ON) ( Ω) Ambient temperature Ta (°C) Drain reverse current I DR (A) Drain-source voltage V DS (V) Drain power dissipation PD ( W ) Drain-source voltage V DS (V) Gate-source voltage V GS (V)
rth − tw 1m 10m 100m 1 10 100 1000 1000 100 −0.1 −1 −10 −0.01 −0.1 −10 −0. 001 −100 EAS – Tch −15 V 15 V TEST CIRCUIT WAVE FORM IAR BVDSS VDD V DS RG=25 Ω VDD = −50 V, L = 168mH ⎟⎟ −⋅ ⋅ ⋅ = VDDBVDSS BVDSS2I L2 1ΕAS 200 150 100 25 50 75 100 125 150 −1000 Single pulse 15×15×0.8 Single 20×20×0.8 Mounted on ceramic substrate 40×50×0.8mm *: Single nonrepetitive pulse Tc = 25°C Curves must be derated linearly with increase in temperature. ID max (pulsed) * ID max (continuous) DC operation Ta = 25°C 1ms * 10 ms * VDSS max SAFE OPERATING AREA Drain-source voltage V DS (V) Pulse width t w ( s ) Normalized transient thermal impedance rth (℃/w) Drain current I D (A) Avalanche energy E AS (mJ) Channel temperature T ch ( ° C )
RESTRICTIONS ON PRODUCT USE 20070701-EN
- The information contained herein is subject to change without notice.
- TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity a nd vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
- The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
- The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
- The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
- Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.