2SJ229_1 SANYO
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
Features
- Low ON resistance.
- Ultrahigh-speed switching.
- Low-voltage drive.
- Its height onboard is 9.5mm.
- Meets radial taping. Electrical Characteristics at Ta = 25˚C 1 : Source 2 : Drain 3 : Gate SANYO : FLP PW £10ms, duty cycle£1% Continued on next page. retemaraPl obmySs noitidnoCs gnitaRt inU egatloVecruoS-ot-niarDV SSD 06–V egatloVecruoS-ot-etaGV SSG 51±V )CD(tnerruCniarDI D 6.1–A )esluP(tnerruCniarDI PD 4.6–A noitapissiDrewoPelbawollAP D 5.1W erutarepmeTlennahCh cT 051 erutarepmeTegarotSg tsT 051+ot55– retemaraPl obmySs noitidnoC sgnitaR tinU nimp ytx am egatloVnwodkaerBecruoS-ot-niarDV SSD)RB( ID V,Am1–= SG 0=0 6–V egatloVnwodkaerBecruoS-ot-etaGV SSG)RB( IG V,Aµ001±= SD 0=5 1±V tnerruCniarDegatloVetaG-oreZI SSD V SD V,V06–= SG 0=0 01–A µ tnerruCegakaeLecruoS-ot-etaGI SSG V SG V,V21±= SD 0=0 1±A µ egatloVffotuCV )ffo(SG V SD I,V01–= D Am1–=0 .1–0 .2–V ecnattimdArefsnarTdrawroF| sfy|V SD I,V01–= D Am008–=0 .18 .1S ecnatsiseRetatS-NOecruoS-ot-niarDcitatS R )no(SD ID V,Am008–= SG V01–=5 3.05 4.0 W R )no(SD ID V,Am008–= SG V4–=5 4.06 .0 W 10.5 1.2 1.6 0.5 2.5 2.5 4.5 1.2 1.4 2.6 8.5 1.0 7.5 1.9 0.5 123
No.3814–2/4 Continued from preceding page. Switching Time Test Circuit retemaraPl obmySs noitidnoC sgnitaR tinU nimp ytx am ecnaticapaCtupnIs siCV SD zHM1=f,V02–=0 83F p ecnaticapaCtuptuOs soCV SD zHM1=f,V02–=0 51F p ecnaticapaCrefsnarTesreveRs srCV SD zHM1=f,V02–=0 4F p emiTyaleDNO-nruTt )no(d tiucriCtseTdeificepseeS2 1s n emiTesiRt r tiucriCtseTdeificepseeS8 1s n emiTyaleDFFO-nruTt )ffo(d tiucriCtseTdeificepseeS0 9s n emiTllaFt f tiucriCtseTdeificepseeS5 5s n egatloVdrawroFedoiDV DS IS V,A6.1–= SG 0=0 .1–5 .1–V
No.3814–3/4
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 1999. Specifications and information herein are subject to change without notice. 2SJ229 PS No.3814–4/4