2SD2686 UTC
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
UNISONIC TECHNOLOGIES CO., LTD 2SD2686 Preliminary NPN EPITAXIAL SILICON TRANSISTOR www.unisonic.com.tw 1 of 3 Copyright © 2013 Unisonic Technologies Co., Ltd QW-R208-050.a SILICON NPN EPITAXIAL TYPE (DARLINGTON POWER) DESCRIPTION The UTC 2SD2686 is a silicon NPN epitaxial type transistors, including a zener diode between co llector and base. it uses UTC’s advanced technology to provide customers high DC current gain. The UTC 2SD2686 is suitable for solenoid drive and motor drive applications. FEATURES * High DC current gain * Zener diode included between collector and base EQUIVALENT CIRCUIT Base ≈5kΩ ≈300Ω Emitter Collector ORDERING INFORMATION Ordering Number Package Pin Assignment Packing Lead Free Halogen Free 1 2 3 2SD2686L-AB3-R 2SD2686G-AB3-R SOT-89 B C E Tape Reel 2SD2686L-AB3-R (1)Packing Type (2)Package Type (1) R: Tape Reel (2) AB3: SOT-89 (3) L: Lead Free, G: Halogen Free(3)Halogen Free
2SD2686 Preliminary NPN EPITAXIAL SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 2 of 3 www.unisonic.com.tw Q W - R 2 0 8 - 0 5 0 . a ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage V CBO 50 V Collector-Emitter Voltage V CEO 60±10 V Emitter-Base Voltage V EBO 8 V Collector Current DC I C 1 A Pulse I CP 3 A Base Current I B 0.5 A Power Dissipation (Note 2) P D 500 mW Junction Temperature T J 150 °C Storage Temperature T STG -55~+150 °C Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Mounted on an FR4 board (glass-e poxy; 1.6mm thick; Cu area, 645mm2) ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Collector-Emitter Breakdown Voltage BV CEO I C=10mA, IB=0 50 60 70 V Collector Cut-Off Current ICBO V CB=45V, IE=0 10 μA ICEO V CE=45V, IE=0 10 μA Emitter Cut-Off Current I EBO V EB=8V, IC=0 0.8 4.0 mA DC Current Gain h FE V CE=2V, IC=1.0A 2000 Collector-Emitter Saturation Voltage V CE(sat) IC=0.5A, IB=1mA 1.2 V IC=1.0A, IB=1mA 1.5 V Base-Emitter Saturation Voltage V BE(sat) I C=1.0A, IB=1mA 2.0 V Turn-On Time t ON See specified test circuit. 0.4 μs Storage Time t STG 4.0 μs Fall Time t F 0.6 μs
2SD2686 Preliminary NPN EPITAXIAL SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 3 of 3 www.unisonic.com.tw Q W - R 2 0 8 - 0 5 0 . a SWITCHING TIME TEST CIRCUIT & TIMING CHART Input 30Ω Output VCC≈30V 20µs Duty cycle<1% UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.