2SD2675TL LITTELFUSE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

Rev.B 1/2 General purpose amplification (30V, 1A) 2SD2675 zApplication Low frequency amplifier zFeatures 1) A collector current is large. 2) Collector saturation voltage is low. V CE(sat) : max.350mV At IC = 500mA / IB = 25mA zExternal dimensions (Unit : mm) Each lead has same dimensions (1) Base (2) Emitter (3) Collector TSMT3 0~0.1 0.16 0.85 1.0MAX 0.7 0.3~0.6(2)(1) (3) 2.9 2.8 1.9 1.6 0.95 0.95 0.4 zAbsolute maximum ratings (Ta=25°C) Parameter Symbol Unit VCBO VCollector-base voltage VCEO VCollector-emitter voltage VEBO VEmitter-base voltage IC A ICP ACollector current PC mWPower dissipation Tj °CJunction temperature Tstg Limits 500 150 −55 to +150 °CRange of storage temperature Single pulse, PW=1ms Mounted on a 25×25× 0.8mm Ceramic substrate ∗2 t zPackaging specifications 2SD2675 TL 3000 Type Package Code Basic ordering unit (pieces) Taping zElectrical characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Conditions 30 −− V IC=10µACollector-base breakdown voltage BVCBO 30 −− V IC=1mACollector-emitter breakdown voltage BVCEO 6 −− V IE=10µAEmitter-base breakdown voltage BVEBO −− 100 nA VCB=30VCollector cutoff current ICBO Emitter cutoff current −− 100 nA VEB=6VIEBO − 120 350 mV IC/IB=500mA/25mACollector-emitter saturation voltage VCE(sat) 270 − 680 − VCE/IC=2V/100mADC current gain hFE − 320 − MHz VCE=2V, IE=−100mA, f=100MHzTransition frequency fT − 7 − pF VCB=10V, IE=0A, f=1MHzCorrector output capacitance Cob ∗ Pulsed

Rev.B 2/2 zElectrical characteristic curves 0.001 0.01 0.1 1 COLLECTOR CURRENT : IC (A) DC CURRENT GAIN : hFE 100 1000 Ta=25°C Ta=−40°C Ta=100°C VCE=2V Pulsed Fig.1 DC current gain vs. collector current 0.001 0.01 0.1 1 COLLECTOR CURRENT : IC (A) BASE SATURATION VOLTAGE : VBE (sat) (V) COLLECTOR SATURATION VOLTAGE : VCE (sat) (V) 0.1 0.01 Ta=25°C Ta=25°C Ta=−40°C Ta=−40°C Ta=100°C Ta=100°C VBE(sat) VCE(sat) IC/IB=20 Pulsed IC/IB=20/1 Pulsed Fig.2 Collector-emitter saturation voltage base-emitter saturation voltage vs. collector current 0.001 0.01 0.1 1 COLLECTOR CURRENT : IC (A) 0.001COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 0.01 0.1 Ta=25°C VCE=2V IC/IB=50/1 IC/IB=20/1 IC/IB=10/1 Fig.3 Collector-emitter saturation voltage vs. collector current 0.001 0.01 0.1 BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR CURRENT : IC (A) 1.51.00.5 VCE=2V Pulsed Ta=25°C Ta=−40°C Ta=100°C Fig.4 Grounded emitter propagation characteristics 0.01 0.1 1 EMITTER CURRENT : IE (A) TRANSITION FREQUENCY : fT (MHz) 100 1000 VCE=2V Ta=25°C f=100MHz Fig.5 Gain bandwidth product vs. emitter current 0.01 0.1 1 COLLECTOR CURRENT : IC (A) Fig.6 Switching time SWITCHING TIME : (ns) 100 1000 Ta=25°C VCE=5V IC/IB=20/1 tstg tdon tr tf 0.01 0.1 1 10 10 0 EMITTER TO BASE VOLTAGE : VEB (V) COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER INPUT CAPACITANCE : Cib (pF) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) 100 Cib Cob IC=0A f=1MHz Ta=25°C Fig.7 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage

Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.