2SD2655 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

Features

  • Small size package: MPAK (SC–59A)
  • Large Maximum current: IC = 1 A
  • Low collector to emitter saturation voltage: VCE(sat) = 0.3 V max.(at IC/IB = 0.5 A/0.05 A)
  • High power dissipation: PC = 800 mW (when using alumina ceramic board (25 x 60 x 0.7 mm))
  • Complementary pair with 2SB1691 Outline 1. Emitter 2. Base 3. Collector MPAK Note: Marking is “WM-“.

Rev.1, Jun. 2001, page 2 of 6 Absolute Maximum Ratings (Ta = 25 °C) Item Symbol Ratings Unit Collector to Base Voltage V CBO 60 V Collector to emitter voltage V CEO 50 V Emitter to base voltage V EBO 6V Collector current I C 1A Collector peak current ic(peak) 2 A Collector power dissipation P C 800* mW Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C Note: *When using alumina ceramic board (25 x 60 x 0.7 mm)

Electrical Characteristics

(Ta = 25 °C) Item Symbol Min Typ Max Unit Test Condition Collector to base breakdown voltage V(BR)CBO 60  VI C = 10 µA, IE = 0 Collector to emitter breakdown voltage V(BR)CEO 50  VI C = 1 mA, RBE = ∞ Emitter to base breakdown voltage V(BR)EBO 6  VI E = 10 µA, IC = 0 Collector cutoff current I CBO  100 nA V CB = 50 V, IE = 0 Emitter cutoff current I EBO  100 nA V EB = 5 V, IC = 0 DC current transfer ratio h FE 200  500  VCE = 2 V, IC = 0.1 A Collector to emitter saturation voltage VCE(sat)  0.16 0.3 V I C = 0.5 A, IB = 0.05 A, Pulse test Base to emitter saturation voltage V BE(sat)  0.91 1.2 V I C = 0.5 A, IB = 0.05 A, Pulse test Gain bandwidth product f T  280  MHz V CE = 2 V, IC = 0.1 A Collector output capacitance Cob  4.2  pF V CB = 10 V, IE = 0, f = 1 MHz

Rev.1, Jun. 2001, page 3 of 6 0 50 100 150 200 Collector Power Dissipation Pc (mW) Maximum Collector Dissipation Curve 0.6 100 0 0.8 Base to Emitter Voltage VBE (V) Collector Current IC (mA) Typical transfer Characteristics Collector Current Ic (mA) 02 4 6 Collector Current IC (mA) Typical Output Characteristics (1) Ambient Temperature Ta (°C) Collector to Emitter Voltage V CE (V) Collector to Emitter Voltage VCE (V) 0.4 1.6 1200 1000 800 400 200 Pulse IB = 350 µA 300 µA 250 µA 200 µA 150 µA 100 µA 50 µA Typical Output Characteristics (2) Pulse IB = 1mA 2mA 3mA4mA 5mA6mA 1000 V = 2V Pulse CE 200 100 500 400 300 200 100 When using alumina ceramic board S = 25 mm x 60 mm, t = 0.7 mm

Rev.1, Jun. 2001, page 4 of 6 1 10 1000 Collector Current IC (mA) Gain Bandwidth Product fT (MHz) Gain Bandwidth Product vs. Collector Current 100 200 300 400 100 100 1000 Collector Current IC (mA) DC Current Transfer Ratio vs. Collector Current 100 1000 11 0 0.1 1 10 100 100 1000 Collector to Base Voltage VCB (V) Collector Output Capacitance Cob (pF) Collector Output Capacitance vs. Collector to Base Voltage 100 1000 Collector Current IC (mA) Collector to Emitter Saturation Voltage VCE(sat) (V) Saturation Voltage vs. Collector Current 0.001 0.01 0.1 11 0 DC Current Transfer Ratio hFE Base to Emitter Saturation Voltage VBE(sat) (V) VBE(sat) VCE(sat) IC/IB = 10 Pulse 500 VCE = 2V Pulse VCE = 2V Pulse f = 1MHz IE = 0

Rev.1, Jun. 2001, page 5 of 6 Package Dimensions 0.16 0 – 0.1 + 0.10 – 0.060.4+ 0.10 – 0.05 0.95 0.95 1.9 ± 0.2 2.95 ± 0.2 2.8 + 0.2 – 0.6 0.651.5 ± 0.150.65 1.1+ 0.2 – 0.1 0.3 Hitachi Code JEDEC EIAJ Mass (reference value) MPAK Conforms 0.011 g As of January, 2001 Unit: mm

Rev.1, Jun. 2001, page 6 of 6 Disclaimer 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail- safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Sales Offices Hitachi, Ltd. Semiconductor & Integrated Circuits Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: (03) 3270-2111 Fax: (03) 3270-5109 Copyright © Hitachi, Ltd., 2001. All rights reserved. Printed in Japan. Hitachi Asia Ltd. Hitachi Tower

16 Collyer Quay #20-00

Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg URL NorthAmerica : http://semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia : http://sicapac.hitachi-asia.com Japan : http://www.hitachi.co.jp/Sicd/indx.htm Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road Hung-Kuo Building Taipei (105), Taiwan Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon Hong Kong URL : http://semiconductor.hitachi.com.hk Hitachi Europe GmbH Electronic Components Group Dornacher Straße 3 D-85622 Feldkirchen, Munich Germany Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585200 Hitachi Semiconductor (America) Inc.

179 East Tasman Drive

San Jose,CA 95134 For further information write to: Colophon 4.0