2SD2261 SANYO

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

Features

  • Darlington connection.
  • High DC current gain.
  • DC current gain is less affected by temperature.
  • Small-sized package. 1 : Base 2 : Collector 3 : Emitter SANYO : PCP (Bottom view) retemaraPl obmySs noitidnoCs gnitaRt inU egatloVesaB-ot-rotcelloCV OBC 08V egatloVrettimE-ot-rotcelloCV OEC 06V egatloVesaB-ot-rettimEV OBE 6V tnerruCrotcelloCI C 5.2A )esluP(tnerruCrotcelloCI PC 5A noitapissiDrotcelloCP C mm052(draobcimarecanodetnuoM 2· )mm8.05 .1W erutarepmeTnoitcnuJj T 051 erutarepmeTegarotSg tsT 051+ot55– retemaraPl obmySs noitidnoC sgnitaR tinU nimp ytx am tnerruCffotuCrotcelloCI OBC V BC I,V06= E 0=0 1A µ tnerruCffotuCrettimEI OBE V BE I,V5= C 0=5 .2A m niaGtnerruCCD h EF V EC I,V2= C A1= 00020 0003 egatloVnoitarutaSrettimE-ot-rotcelloCV )tas(EC IC I,A1= B Am2= 5.1V egatloVnoitarutaSrettimE-ot-esaBV )tas(EB IC I,A1= B Am2=2 V egatloVnwodkaerBesaB-ot-rotcelloCV OBC)RB( IC I,Aµ001= E 0=0 8V egatloVnwodkaerBrettimE-ot-rotcelloCV OEC)RB( IC R,Am01= EB =¥ 06V Marking : DR

No.5311–2/3 Electrical Connection 7kΩ C B E 500Ω 0 13579 0.8 0.4 1.2 1.6 2.0 0.6 0.2 1.0 1.4 1.8 10 0 0.2 0.4 0.6 0.8 0.5 1.0 1.5 2.0 2.5 IC -- VBE 5 0.1 233 577 1.0 23 5 10000 1000 hFE -- IC 77 0.1 1.0 23 55 1.0 352 VCE (sat) -- IC 5 1.0 23 50.1 23 775 1.0 VBE (sat) -- IC 0.01 1.0 22 333 777 55 10 1.0 0.1 100 A S O 120µA 140µA IC -- VCE 25°C Ta=--25°C 75°C DC operation 1ms 10ms Ta=25°C Single pulse Mounted on a ceramic board (250mm2·0.8mm) 400 µA 300 µA 250µA 200µA 180µA 160µA IB =0 25°C Ta=--25°C 75°C IC / IB =500 V CE =2V V CE =2V IC / IB =500 - -25 Ta=75 25°C --25 °CTa=75 IT00003 IT00005 IT00004 IT00006 IT00007 IT00008 ICP IC Collector Current, IC –A Collector-to-Emitter Voltage, VCE –V Collector Current, IC –A Base-to-Emitter Voltage, VBE –V DC Current Gain, hFE Collector Current, IC –A Collector Current, IC –A Collector-to-Emitter Saturation Voltage, VCE(sat) –V Base-to-Emitter Saturation Voltage, VBE(sat) –V Collector Current, IC –A Collector Current, IC –A Collector-to-Emitter Voltage, VCE –V

Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 1999. Specifications and information herein are subject to change without notice. 2SD2261 PS No.5311–3/3 20 40 60 80 100 120 140 160 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 PC -- Ta IT00009 Mounted on a ceramic board (250mm 2·0.8mm) Collecter Dissipation, PC –W Ambient Temperature, Ta –°C